A raised panel wardrobe door is one of the few fitted-joinery details you can judge by touch as well as by eye. The moulded profile catches light differently at every hour of the day, and the same drawing can look handsome in a render and clumsy on site. That is exactly why a physical sample and a written proposal matter more than a rendering. If you are comparing quotations from two or three suppliers for villa or apartment bedrooms, the difference in price usually sits in details that never appear on the picture. The checklist below shows what to ask for, what to check on the sample, and what to have written into the proposal before you sign.
1. Ask for a door sample, not just a finish board
Many suppliers send a small board showing the colour or veneer. That tells you very little about a raised panel, because the panel is shaped rather than flat. Request an actual door sample — one full door, or at least a cut-off section that includes the moulded edge and the transition where the profile meets the frame. On that piece you can check the three things that decide whether the door reads as careful work: how clean the moulding line is, how evenly the finish covers the recessed grooves, and how the edges are handled where two surfaces meet.
Run your fingernail along the profile. A well-made door feels continuous, with no lifted edge and no thin, washed-out patch inside the groove. Hold the sample at a low angle to a window; an uneven surface texture, patchy sheen or a visible seam at the corner tells you more than any specification sheet.
2. Compare how the panel is built, not only what it looks like
Two doors can carry the same name and be made in different ways. Some raised panel doors are moulded from a single engineered substrate with a laminated or lacquered surface; others are assembled from separate rails, stiles and a central panel; others use a decorative moulding applied over a flat core. Each behaves differently over time and each has a different cost structure. Ask each supplier in writing how the door is constructed and what substrate sits under the finish, then put those answers side by side. Our Raised Panel Wardrobes are made to measure with material and finish options specified per project, so the construction detail is agreed before production rather than settled on site.
3. Match the panel style to the room it is going into
A deep raised profile carries visual weight. In a bedroom with generous wall length it looks settled; in a narrow bedroom with low ceilings it can feel heavy, and the shadow gaps between doors become more noticeable. Where a lighter look is wanted, compare the same layout against a flatter alternative from the same collection: a shaker panel wardrobe keeps the framed, classic reading with a much shallower centre, and a Recessed Panel Wardrobes design pushes the shadow line the other way. Ask every supplier to quote the same three door styles so the comparison is about build quality and price, not about which style the designer happened to draw.
Door opening matters as much as profile depth. A panelled hinged layout gives a full unobstructed opening and needs clear swing space in front of the unit; a sliding layout saves floor area but changes how the panels line up and how the shadow gaps read. If one quotation is hinged and another is sliding, you are not comparing like with like — see our Paneled Hinged Wardrobes for the hinged version of the same paneled language.
4. Read the proposal line by line before comparing prices
Price differences between wardrobe quotations rarely come from the doors alone. Before you rank the numbers, confirm that every proposal states the same items:
- Final dimensions for each unit, taken from a site survey or agreed drawings rather than an assumed room size
- Internal layout — hanging zones, drawers and shelves — and whether those are included or priced as extras
- Substrate, surface finish and edge treatment for doors, carcass and any visible ends
- Hardware make and type: hinges, slides, handles, and what is excluded
- Lighting, plinths, scribes, cornice and any fill needed against an uneven wall or ceiling
- Who carries out the measuring, the delivery and the installation, and what happens if walls are out of square
A quotation that leaves out scribing, fillers and lighting can look cheaper than a complete one while costing more once both are finished. Restate each proposal in the same table before you compare totals.
5. Check what happens between the factory and your wall
For imported joinery the interval between approval and installation is where problems appear. Confirm how the units are packed, how they are shipped, who clears them, and who fits them on site. A supplier handling production, freight and installation in one sequence answers to one scope of work; a split arrangement means two parties pointing at each other if a unit does not sit flush. Our Furniture Logistics and Door-to-door Delivery service covers freight, packaging and delivery coordination, and our Installation and After-sales Support covers fitting, inspection of the finished work and follow-up on outstanding items. Ask your other suppliers to state the same scope in writing so you can compare it rather than assume it.
6. Test one sample against all three quotations
The practical way to close out a comparison is to hold one physical reference in your hand while you read the proposals. Take your preferred sample to site, hold it against the wall near the bed headboard and look at it in morning and evening light. Then check each proposal against that piece: does the written finish match what you are holding, is the profile depth stated, and do the drawings show the shadow gaps and door heights you expect? Where a supplier cannot provide a sample of the exact door they are quoting, treat that as a risk and allow for it in your comparison.
If you want input on layout before committing, our Interior Design Services team works from space planning through drawings and production coordination, so the wardrobe you approve on paper is the one that reaches site. Send us your room dimensions, the quotations you hold and any door sample you already have, and we will confirm what each proposal does and does not include.
SANTERSON — made-to-measure built-in furniture for villa, apartment and hotel projects. Enquiries: PHILLIP, +86-13928214007 (WhatsApp), santerson@qq.com.