A swim spa is rarely a stand-alone purchase on a villa or resort project. It arrives on the same container manifest as outdoor lounge sets, poolside dining, cabinetry, wall finishes and lighting — which means one under-scoped line item can stall an entire handover. The Outdoor Swim Spa WS-PC02 is a compact, square-format hydrotherapy unit that sits well in this kind of mixed package, but only if the buyer scopes it properly before the quotation is locked. This guide walks through what to check, what to budget for, and how to keep a single swim spa line from derailing a multi-product procurement.

Start With the Footprint, Not the Finish

The catalog dimensions for WS-PC02 are 3000 × 3000 × 1050 mm. That square plan is what makes this model useful on tight sites: it fits a courtyard corner, a terrace deck, a rooftop setback or an indoor plant room without the long linear run that lap-style swim spas demand. Before anyone discusses panel colours or jet layouts, confirm three physical constraints with your site team:

  • Structural support. A full 3 m × 3 m water volume is a heavy concentrated load. On an elevated deck or rooftop slab, the structural engineer must sign off on the loading before the unit is confirmed — not after production starts.
  • Access route. The shell has to travel from the container to its final position. Measure door widths, lift capacities, stair turns and gate clearances along the actual path, and flag the tightest point in your enquiry so we can advise on handling.
  • Waterproofing interface. The 1050 mm shell depth determines how the surrounding deck, drainage channel and overflow detail are built. Coordinate this with whoever is pouring the slab or laying the deck finish, because re-cutting a finished deck is the most expensive mistake in this category.

What the Catalog Specification Already Covers

When you compare supplier quotations, make sure every line for WS-PC02 reflects the same equipment count. The catalog specification for this model reads as follows:

ModelWS-PC02
Catalog dimensions3000 × 3000 × 1050 mm
Control system1 set
Water pump2 pcs
Filter pump1 pc
Jet total60 pcs
LED lights1 pc
Total power7.35 kW
Features shownWater jets, LED lighting, Ozone

Two numbers in that table drive most downstream cost. The first is total power: 7.35 kW. That figure sets the electrical supply your local contractor must provide — circuit sizing, protection device, cable run from the switchboard, and whether the site's existing distribution board has headroom for it. Electrical work is almost always done locally and is very often left out of the supplier quotation, so put it in your project budget as a separate line rather than assuming it travels with the spa.

The second is jet total: 60 pcs, supported by two water pumps and one filter pump. Jet count and pump count are what distinguish a hydrotherapy unit from a simple plunge pool, and they are the first things a competing quotation quietly reduces. If one supplier's price looks far lower than another's, check the jet count and pump count before comparing anything else.

Specification discipline: catalog figures describe the standard configuration shown on the product page. Included equipment and electrical requirements should be confirmed for the exact configuration you order, in writing, before production begins. Treat any number that matters to your budget as unconfirmed until it appears in your signed specification sheet.

Budgeting the Options That Actually Change the Price

The catalog lists optional accessories for this range: control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so confirm each one against WS-PC02 rather than assuming the full list applies. Here is how to think about them from a buyer's point of view:

OptionWhen it earns its costWhat to confirm first
Heat pumpThe spa will be used outside warm months, or the client expects a set water temperature year-round.How the heat pump interacts with the 7.35 kW baseline load, and whether your local supply can carry the combined draw.
InsulationCold-climate or night-time use, where heat retention drives running cost.Which surfaces are insulated and how the insulation affects access to pumps for servicing.
UV sterilizationHigh-frequency use in a hotel, gym or resort setting where chemical dosing alone is labour-intensive.Whether it supplements or replaces part of the ozone system already specified.
Sand filtrationThe project prefers a filtration approach that matches an existing pool plant on site.Footprint and plumbing route for the filter vessel, since it sits outside the shell.
Additional water pumpsA jet layout or seating arrangement that needs more pressure zones than the standard two.Revised total power draw and the effect on the electrical scope.
StepsThe 1050 mm shell depth makes entry a real consideration for older or less mobile users.Whether steps are integrated into the deck design or supplied as part of the unit.

A practical budgeting rule: quote the base unit, then price each option separately in your cost plan. That way the client can see exactly what a heat pump or UV system adds, and you retain a cheaper compliant fallback if the package total needs trimming later.

Scoping It Inside a Multi-Product Package

This is where most procurement pain actually occurs. A swim spa ordered as an isolated purchase behaves differently from a swim spa ordered alongside the rest of an outdoor programme, and the second approach is usually cheaper overall — provided you handle four things deliberately.

1. Consolidate the categories that share one site interface

The spa, the outdoor furniture for villas and resorts around it, and the poolside lighting all touch the same deck, the same drainage line and the same electrical run. Order them together and one set of drawings governs all three. Order them separately and you inherit three sets of assumptions that will not reconcile on site.

2. Lock one specification document

With the Swimming Pools and Swim Spas range, product marketing titles on a website are not always identical to the naming used in the specification area of a product page. Do not let a purchase order reference a marketing title alone. Reference the model code — WS-PC02 — plus the confirmed equipment list, so what arrives matches what was priced.

3. Plan the logistics as one movement

Mixed containers change how a spa is handled. A container that also carries cabinetry, flooring and lighting panels needs a loading sequence that puts the heaviest, hardest-to-move item where it can be unloaded first and routed to its final position without crossing finished interiors. Our furniture logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery — but the loading plan only works if the spa is in the same order, at the same time, as everything else.

4. Sequence the site works

The spa should be positioned before surrounding finishes are completed, while the installation and after-sales support visit for loose outdoor furniture happens last. Build the programme backwards from handover: slab and waterproofing, spa set and electrical connection, deck finishes, then furniture and lighting placement.

A Six-Line Check Before You Release the Purchase Order

  • Structural sign-off obtained for the filled unit at the intended location.
  • Access route measured and confirmed, with the tightest clearance documented.
  • Electrical scope priced locally against the 7.35 kW figure, plus any heat pump addition.
  • Every option on the quotation confirmed as compatible with WS-PC02 specifically.
  • Purchase order references the model code and confirmed equipment list, not a marketing title alone.
  • Loading sequence agreed for the mixed container, with the spa's unload point identified.

If any of those six lines is blank, the budget is not finished — it has simply not been questioned yet.

Why a One-Stop Package Reduces Project Risk

SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials, working on hospitality, villa and office projects. Coordinating a swim spa through the same route as the rest of the package means one specification owner, one production schedule, one container plan and one point of accountability when something needs adjusting. The turnkey interior project solutions service runs consultation, design and planning, production, logistics, installation and after-sales as a single sequence rather than six separate contracts.

Where a project needs something the catalog does not carry — a different footprint, a bespoke finish, a configuration tailored to a specific terrace — our custom furniture and OEM service covers custom design and prototyping, bespoke material finishes and textures, flexible minimum order quantities and brand customisation. Custom scope takes longer to confirm than a catalog model, so raise it at the enquiry stage rather than after the package is priced.

For buyers weighing WS-PC02 against other formats in the range, comparing the square plan here with longer layouts such as the Long Outdoor Swim Spa with Hydrotherapy & Relaxation Pool is usually the fastest way to settle the question: it comes down to whether the site can carry a linear run or needs a compact square.

Send us your spa line and the rest of your package list

Share the model code, your site constraints (structural, access and electrical) and the other product categories in the same order, and we will return a specification sheet for WS-PC02 with confirmed equipment counts, an options breakdown and a consolidated container plan. Contact PHILLIP on +86-13928214007 or santerson@qq.com, or use the contact page.