Acoustic sliding panels look simple on a drawing: two or three leaves on a track, a fabric or timber face, and a partition that closes when you need quiet. In practice they sit where acoustics, joinery and hardware meet, which is exactly where specification errors appear. When we receive enquiries for Santerson Acoustic Sliding Panels, the projects that run smoothly are the ones where the designer and the buyer have already agreed on a small set of decisions. Below is the list we work through with both sides, so nothing gets discovered on site.
Start with the behaviour you want, not the panel face
Two projects can order panels that look identical and need completely different build-ups. A media wall in a penthouse needs to hide a screen while keeping the room readable from a sofa; a partition between a meeting room and a corridor has to limit speech travel when it is closed; a door to a plant or service cupboard mainly needs to survive daily use. Tell us which of these you are solving, and the core, the sealing detail and the hardware follow from that answer rather than from a sample board.
For our listings this matters because the acoustic sliding panels sit in the Sliding Panel Systems collection alongside glass, textured and wooden variants. If the priority is daylight or visual connection across the space, Santerson Glass Sliding Panels may be the better starting point, with acoustic treatment handled elsewhere in the room.
Agree the acoustic target in writing, and agree who verifies it
"Soundproof" is not a specification. Whether you need speech privacy between adjacent rooms, a reduction in reverberation inside one room, or protection from plant noise, these are different physical requirements, and a panel face alone does not deliver them. The gaps that matter most are the perimeter seal, the junction with floor and ceiling, and any service run behind the wall.
Our product page describes configurable acoustic sliding panels for residential wall system projects, with made-to-measure sizing and a choice of materials and finishes; it does not publish a single performance figure, because the rating belongs to an assembled configuration rather than to the collection. We therefore ask the design team to state the target they are designing to, and we confirm with you in writing which configuration is being supplied for that target before production. If your project has a consultant's report behind the requirement, send it — it shortens the exchange considerably.
Fix the opening and the track before your finishes are ordered
Sliding systems fail far more often because of the opening than because of the panel. Please confirm with dimensions, not a typical detail:
- Clear opening width and height at finished floor and finished ceiling level, including tolerance.
- How many leaves, which direction they stack, and where the pocket or overlap lands.
- Whether the track is surface-mounted, recessed into a ceiling build-up, or hung from a structural element above.
- Available depth behind the stack — this decides leaf thickness and hardware choice.
- Floor finish on both sides, since threshold and bottom-guide details change between timber, stone and carpet.
The same discipline applies if your scheme mixes systems. A wall that combines a sliding panel with Santerson Partition Sliding Systems needs one coordinated track line and one stack zone, decided once, rather than two details drawn separately.
Lock the finish and the sample process early
Acoustic faces are where a designer's intent is most easily lost. Veneer matching, fabric selection, painted colour and texture all read differently at panel scale than on a chip, and a perforated or fabric-wrapped face changes how light falls across the surface. We recommend approving a physical sample of the actual face construction — not just a material swatch — before the full set is released for manufacture.
Where the wall has to match surrounding joinery, send the finish reference together with the sizing information. That lets us confirm which materials we can supply in that configuration under our custom and OEM service, instead of matching by photograph at the end of the job.
Buyers: what to align on your side
Procurement questions are usually about sequence and accountability rather than price. To quote the openings as one package, we need from the buyer:
- The set of openings to be quoted together, with the drawing revision each dimension comes from.
- Your delivery terms and destination, so freight and packaging are quoted with the panels rather than added later.
- Who installs on site — our team under an installation package, your joiner, or your main contractor.
- The inspection point you want before dispatch, and who signs it off.
- Site access constraints that affect handling, such as lift sizes or restricted delivery hours.
Our project services cover design coordination, custom and OEM manufacturing, door-to-door logistics and installation support, so the same team can carry the panels from drawing to handover. That is also why we ask for one revision-controlled drawing set: a dimension changed after production release is the most expensive change in a sliding wall.
Questions that come up on almost every project
Can acoustic sliding panels be made to an existing opening on site?
Yes, they are made to measure. We do need verified dimensions taken at finished levels, because the track, the overlap and the seal all depend on them.
Can the panels match my wardrobe or wall panelling finishes?
In most cases. Send the finish reference with your enquiry and we confirm what is available in that construction. Related collections such as Santerson Textured Sliding Panels are often specified where a continuous textured wall is the design intent, while fixed faces can be carried by Santerson Acoustic Panels.
Do you supply and install, or only manufacture?
Both options exist. Tell us your site team and we will quote accordingly, including packaging sized for the access route you have described.
If you are specifying a sliding wall and want the acoustic configuration confirmed before drawings are issued, send us the opening dimensions, your performance target and the finish reference. We will come back with the build-up we can manufacture for that combination, together with shop drawings for your review.
SANTERSON is a China-based manufacturer and one-stop supplier of furniture and building materials for villa, hospitality and office projects, operating since 2008. Enquiries: SANTERSON.