A swim spa that arrives intact is only half the job. The other half is making sure the site is ready when it lands, that the power and drainage work are finished before the crane or forklift shows up, and that whoever assembles the shell, plumbing and control system knows what was actually ordered. Below is how we plan delivery and installation for Outdoor Swim Spa WS-125AⅢ, a 5500 × 2300 × 1350 mm unit from our configurable outdoor swim and hydrotherapy range, so the handover happens in one visit rather than three.
Start with the footprint, not the brochure
The catalog dimensions for this model are 5500 × 2300 × 1350 mm. Treat those numbers as the starting point for two separate measurements on your site: the clear opening the shell has to pass through on the way to position, and the finished pad or deck it will sit on. A spa that fits the garden plan but cannot get past a side gate, a narrow driveway turn or an overhead power line creates a delivery day nobody wants to pay for twice.
Send us the access route as early as the concept drawings: gate widths, turning radii, overhead obstructions, whether the ground is paved, grass, gravel or a raised timber deck, and how far the truck can get to the final position. That single set of measurements decides whether we ship on a standard container delivery, arrange a crane-offload, or split the load so it can be moved by hand.
Confirm the configuration before the order is locked
The same shell can be built to different specifications, and the specification changes what your electrician and plumber need to prepare. The catalog listing for this model shows a control system and swim training system (1 set each), one water pump, one filter pump, 20 jets, three LED lights and a total power figure of 8.05 kW. Optional items in the catalog range from UV sterilization and heat pumps to sand filtration, insulation and steps.
| Catalog dimensions | 5500 × 2300 × 1350 mm |
| Control system | 1 set |
| Swim training system | 1 set |
| Water pump / filter pump | 1 pc each |
| Jet total | 20 pcs |
| LED lights | 3 pcs |
| Total power (catalog) | 8.05 kW |
Those figures come from the catalog entry for this model and move with the options you choose, so we ask you to confirm the included equipment and the electrical requirements of the selected configuration in writing before production starts. The 8.05 kW figure is a catalog value, not the load your electrician should size a breaker from without checking the final build sheet. A heat pump, an added pump or a different filtration route all change it.
Get the site services finished before the spa arrives
Most delayed handovers trace back to site work that was left until the shipment was already on the water. Work through these with your local contractor while the unit is still in production:
- Foundation. A level, fully supported base sized to the shell footprint. Point supports under an acrylic-shell spa loaded with water will show up later as stress on the cabinet and finish.
- Power. A dedicated circuit run to the control location, sized from the confirmed build sheet, with the isolation and protection your local regulations require. Have the electrician on site the same week as assembly.
- Drainage and fill. A fill connection and a drain route away from the pad, plus somewhere the first drainage discharge can legally go.
- Clearance for service. Leave access to the pump, filter and control areas. Everything bolted to the shell has to be reachable without pulling the spa off its base.
- Permits and HOA or council approvals where they apply — these belong in the project programme, not in the week before delivery.
How our logistics and installation support works
The spa is one line item in a larger package for most of our project clients, which is why we handle the freight as part of the programme rather than leaving it to the buyer. Our logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs paperwork such as commercial invoices, packing lists and certificates of origin, packaging and container loading plans, and shipment tracking through to the delivery address. Import terms, duties and transit times are confirmed case by case for each destination, so your programme dates come from a real quotation rather than an estimate.
On arrival, our installation and after-sales support covers on-site installation, inspection and snag lists, warranty coverage, spare parts and replacement, and ongoing maintenance. For a swim spa this is the point where three trades have to line up: the crew positioning the shell, the electrician terminating and commissioning the control system, and whoever balances the water chemistry for the first fill. We schedule those visits against your site readiness date, not against the vessel ETA, so nobody stands around waiting.
A practical sequence that holds up on site
- Week 0 — brief and survey. Confirm the configuration, send access measurements and photos, agree the delivery method.
- Production. Build to the confirmed specification; site work runs in parallel, not afterwards.
- Pre-shipment check. Confirm packaging marks, the offload plan and who meets the truck.
- Site readiness sign-off. Pad cured and level, power terminated, drainage routed. Photograph it before delivery.
- Positioning and assembly. Offload, place on the base, connect pumps, filter, jets, lighting and control system.
- Commissioning and handover. Fill, run the swim training system and jets, check the ozone and lighting, walk through operation and maintenance with the owner, and close out the snag list.
If the spa is part of a wider villa or hospitality fit-out, sequence it alongside the other wet-area work. Our turnkey project solutions cover design coordination, production and site coordination through to handover, so the spa delivery date can be set against the same programme as flooring, cabinetry and outdoor furniture instead of being arranged separately at the end of the job.
Where customisation changes the plan
Not every plot accepts a standard rectangular shell. Where the terrace is curved, set into a courtyard or bounded by an existing structure, our customizable shape outdoor spa can be built in square, round, oval or curved layouts to suit the space, with an acrylic shell and structural reinforcement for garden and terrace installations. Custom geometry changes the delivery calculation — panel sizes, offload sequence and assembly time all move — so bring it into the conversation before drawings are issued rather than after.
What to send us when you enquire
- Site photos and access measurements, including gate widths and overhead clearances
- The intended base construction and whether it is built or still to be poured
- Your preferred options list — heat pump, UV sterilization, sand filtration, insulation, steps, automatic cover
- Local electrical supply details (phase, voltage, available service capacity)
- Target handover date and any programme milestones it is tied to
With those five items we can quote the unit, the freight route and the installation visit against one calendar instead of three. Browse the wider swimming pools and swim spas range to compare shell sizes before you settle on a footprint, then send us the drawings — we will tell you what will not fit through the gate long before it is built.
SANTERSON manufactures furniture and building materials in China and supplies project clients worldwide, with in-house design coordination, custom and OEM production, door-to-door logistics and installation support. Contact us to plan the delivery and commissioning of your swim spa around your own site programme.