A blue grey minimalist kitchen looks effortless on a rendering and demanding on a purchase order. The palette is unforgiving: flat panels, sharp reveals and continuous runs of colour expose every mismatch between the drawing, the sample and the delivered cabinet. If you are comparing quotations from several suppliers for a villa, apartment or hotel kitchen package, the differences rarely show up in the headline price. They show up in what each supplier assumed about your dimensions, your appliances and your finish.
The comparison below follows the order in which problems actually appear on site, starting with the drawings you approve and ending with the parts that arrive in a separate crate weeks later.
1. Compare what is being measured, not what is being drawn
Minimalist cabinetry depends on tight reveals between doors and between the cabinet run and the wall. Those tolerances can only be set from measured site dimensions, not from an architectural plan alone. Before you accept a quotation, confirm three things in writing:
- Whether the supplier is quoting from your drawings or from on-site measurements of the completed shell, including floor level and wall plumb.
- Who signs off the final shop drawings, and at what stage the cut-off falls — because a change after sign-off affects both price and production slot.
- How out-of-square walls and uneven floors are handled: scribing, filler panels or an adjustment allowance on site.
Our modern blue grey minimalist kitchen cabinets are made to order rather than supplied in fixed modules, so dimensions, internal layout, panel colour and surface finish are all set per project. That flexibility only pays off if the measurement basis is agreed early.
2. Compare the finish specification line by line
"Blue grey, matte" covers several different products at different prices. A deep blue and dark grey two-tone scheme is especially sensitive, because adjacent panels in slightly different sheen will read as a defect once installed under kitchen lighting. Ask each supplier to state:
- The panel substrate and the surface system — matte laminate, acrylic, lacquer or PVC wrap — rather than a colour name alone.
- Whether light and dark panels in the same kitchen come from one production batch.
- Edge treatment on visible door edges, which is where a flat panel design is judged most quickly.
- How the colour is approved: a physical sample you sign, not a screen proof or a photograph of an installed kitchen.
Panels in a shared kitchen also need to take heat, steam and cleaning without changing appearance, so ask which surface treatments are offered for high-use settings and confirm the cleaning products recommended for the finish you choose. For reference points within our own range, grey matte cabinets and black minimalist cabinets are separate finish families with their own sample options.
3. Compare who owns the appliance interface
In a flat-panel kitchen, most of the visible geometry is created by the gaps around built-in appliances. Oven, steam oven, coffee machine, dishwasher and refrigerator cavities must be sized to the exact models you buy — not to generic assumptions.
| Item to confirm | Why it changes the price and the fit |
|---|---|
| Appliance model list at quotation stage | Cabinet widths, ventilation gaps and door alignment all follow the models selected. |
| Ventilation and heat routing for ovens | Rear and base clearance affects carcass depth and the skirting design. |
| Integrated versus built-in doors | Panel-ready appliances need matching decorative doors cut from the same batch as the rest of the run. |
| Who supplies the worktop and splashback, and to what tolerance | Worktop thickness sets the reveal at the wall cabinets and the sink cut-out position. |
Our custom built-in kitchen cabinets are supplied as interior fixtures for hotel, apartment and residential projects with the supporting hardware included — hinges, drawer slide rails, support legs and connecting brackets — so the interface details are fixed on the shop drawings rather than solved on site.
4. Compare hardware as a specification, not an accessory
Handleless fronts are where minimalist kitchens either feel well made or feel cheap, and the difference is in fittings that most quotations leave vague. Ask specifically whether doors use a profile pull rail, a J-pull edge or a touch-to-open mechanism, and confirm the brand and load rating of hinges and drawer runners on the quotation. Soft-close fittings throughout are worth specifying from the start; retrofitted hardware rarely matches the original alignment.
For a handleless scheme, see our handleless minimalist kitchen cabinets, where the continuous front surface is achieved with concealed opening mechanisms and soft-close hardware on base units, wall units and tall pantry columns.
5. Compare what "custom" includes for storage and lighting
Two quotations can carry the same cabinet footprint and very different interiors. Internal fittings — tall larder shelving, pull-out pantries, corner solutions, cutlery organisation, bin compartments — are usually priced separately, and an illuminated glass display section is a different build from a closed wall unit. Specify the interior layout per unit on the drawing before pricing, so you are comparing like for like.
Integrated lighting needs the same early treatment. LED strips inside cabinets and in open display shelving require wiring routes, a driver location and a switch plan agreed with your electrician, and they should appear on the electrical drawing rather than be added after the carcasses are made.
6. Compare packaging, sequence and what happens if a part is damaged
For an overseas order, the practical risk is not the container but the missing door panel. Ask each supplier how cabinets are packed and labelled — by room and elevation, with a crate list you can check on site — and how replacement panels for a damaged or mis-sized component are produced and shipped. A quoted lead time means little unless the replacement route is also defined.
We handle freight forwarding, customs paperwork and door-to-door delivery as part of the project scope, with installation support and after-sales service arranged around the site programme. Confirm the shipping terms, insurance and delivery address for your own project before ordering.
A short comparison checklist
- Measurement basis agreed: site survey or drawings, and who signs the final shop drawings.
- Finish specified by surface system and batch, approved on a signed physical sample.
- Appliance models fixed before production, with ventilation clearances drawn.
- Hardware listed by type, brand and rating, including the handleless opening method.
- Internal fittings and integrated lighting priced on the same drawing you are comparing.
- Packing list, crate labelling and replacement-part route defined in the order.
SANTERSON manufactures furniture and building materials in China and supplies kitchen, wardrobe and interior fixture packages for villa, apartment and hospitality projects, with custom/OEM production, logistics and installation support. Send us your drawings or measured dimensions and the appliance list, and we will quote against the same specification you are using elsewhere.