A long swim spa is not a product you can judge from one specification line. By the time the Outdoor Swim Spa WS-S12-T reaches site level, the difference between two quotations often sits in what each supplier chose not to write down: how the shell is supported, which pump drives which function, and what has to be prepared on site before the crate arrives. If you are evaluating this model for a villa terrace, a resort pool deck or an estate with a separate plant area, here is how to line up samples and proposals so that the comparison is genuinely like for like.

Start With the Published Baseline, Not the Price Sheet

Every proposal you receive for this model should be able to reproduce the catalog figures without qualification. For WS-S12-T, the published catalog entry lists an overall envelope of 11740 × 2200 × 1470 mm, one control system, one swim training system, two water pumps, one filter pump, a jet total of 73 pieces and LED lighting described as one fitting plus 50 small LEDs. The same entry shows water jets, LED lighting, ozone and the swim training system as the features presented for this configuration, and states a total power figure for that catalog build. Treat that power figure as a starting point rather than a fixed number: adding a heat pump, extra pumps or other options changes it, so ask each bidder to state the total load for the exact configuration they are quoting.

Treat those numbers as the reference point, not as a finished specification. Two suppliers can both quote "WS-S12-T" while one includes the control system in the base price and the other lists it as an option. Ask each bidder to restate the baseline in their own document and mark clearly what is included, what is optional, and what has been substituted. Any deviation from the published figures should be explained in writing with a reason attached.

Practical test: if a proposal cannot reproduce the catalog model name, envelope dimensions and equipment counts in one clean table, it is not ready to be compared with anything else on your desk.

Break the Package Down Into Systems Before You Compare Prices

A swim spa of this size is really four packages bundled into one crate list, and each behaves differently in a quotation. Split them before you read any total.

Shell, cabinet and support structure

  • The internal shell material and the laminate or reinforcement build behind it, stated by make and thickness rather than as "acrylic".
  • Cabinet construction and how the base is supported once filled. An 11.7 m long vessel loaded with water needs a defined bearing strategy; ask each supplier to state what support is expected under the full length and at the ends.
  • Access provisions for pumps, filters and the control system, and whether they can be reached without removing cladding.

Water handling

  • Which of the two water pumps serves the swim training function and which serves the jets, and what each is rated at. A count of "2 pcs" says nothing about performance.
  • Filtration flow rate against the water volume implied by the envelope dimensions, plus whether the quoted filter pump matches the catalog figure of one unit.
  • Ozone generation capacity and how dosing is controlled, since ozone output has to be matched to volume and bather load.

Jets, lighting and controls

  • The jet total of 73 pieces broken down by type and position on a layout drawing, so you can see whether hydrotherapy seating zones are actually served.
  • Lighting specification for the single fitting and the 50 small LEDs, including driver location and IP rating.
  • The control system: what it regulates, how it is mounted, and how a user operates temperature, filtration cycles and the swim function day to day.

Options that change the number materially

Catalog-listed options for this range include control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps. Availability and compatibility vary by model, so confirm each one against WS-S12-T specifically rather than accepting a generic option list. Heating and insulation in particular change both the purchase price and the running profile, so request them priced as separate line items on every proposal.

What to Ask Each Supplier to Send Before You Decide

Documents are cheaper than site corrections. Request the same set from every bidder so the comparison stays honest.

Item to requestWhy it matters for WS-S12-T
Dimensioned general arrangement drawingConfirms the 11740 × 2200 × 1470 mm envelope, access clearances and how the unit sits relative to your deck edge and plant area.
Equipment schedule with makes and ratingsTurns "2 water pumps, 1 filter pump, 73 jets" into comparable hardware you can price properly.
Electrical single-line diagramConfirm the total connected load for the configuration quoted, plus supply phases, circuit protection and any additions from a heat pump or extra pumps, before your electrician prices the board.
Foundation and support noteLong spans deflect; you need the supplier's stated bearing and level requirements in writing, not assumed by your builder.
Packed dimensions and lift planAn 11.7 m assembly dictates transport mode, container arrangement and crane or forklift access on the day.
Written inclusions and exclusions listRemoves the most common dispute at handover: who supplies steps, cover, insulation and commissioning.

If you are working from a drawing package rather than a built site, ask for a 3D view of the installed unit in your setting. Our Interior Design Services team handles space planning and 3D renderings for indoor and outdoor areas, which is usually where poolside layouts get resolved before anything is cut.

Judge the Proposal, Not Just the Product

With the hardware normalised, the remaining differences are procedural, and they predict how the job will actually run.

  • Configuration discipline. Does the quotation name one configuration, or does it hedge across several? A single named configuration with an option list is auditable; a range of "from" prices is not.
  • Specification confirmation before production. Ask when signed-off drawings and an equipment schedule are produced, and who signs them. This is the point at which discrepancies get caught cheaply.

Delivery terms are where like-for-like comparison usually breaks down, because the same unit can be quoted on very different scopes. Establish whether sea, air or rail freight is proposed, who prepares customs paperwork and how the assembly is packaged and loaded, then fix the point at which door-to-door responsibility ends. Our Logistics and Door-to-Door Delivery service covers freight forwarding, documentation and container loading, but the exact terms should be agreed project by project.

Then follow the chain into site work: who sets the unit, who connects services, who commissions the water systems and what is inspected before handover. Our Installation and After-sales Support page describes on-site installation, inspection and spare-parts support; confirm availability in your location for this specific model. Ask every bidder to state these answers in writing, together with which wear items are stocked, how quickly a replacement pump or control module ships, and what the warranty excludes. Vague promises at bid stage are the clearest warning sign of an expensive handover.

Check the Model Choice Before You Compare Suppliers

Sometimes the cheapest way to fix a bad quotation is to change the specification. WS-S12-T sits at the long end of our Swimming Pools and Swim Spas range, and its length is what makes the swim training lane genuinely usable for lap work rather than a token jet. If your site cannot support an 11.7 m envelope, or if the budget cannot carry the associated freight and crane access, look at shorter configurations in the same family before you start negotiating exceptions.

The reverse also holds. If the project calls for a spa integrated into a wider outdoor scheme — outdoor furniture, cabana seating, hardtop shade structures and poolside loungers — then buying the swim spa as one line in a single package with the rest of the terrace is usually easier to coordinate than five separate orders from five factories. That is where a turnkey approach earns its keep, because one team carries design coordination, production scheduling and delivery across the whole outdoor area.

Score Every Bid on the Same Sheet

Set up one comparison sheet before the first proposal arrives, with a row for each item in the table above plus the option list. Score three things separately: specification completeness, evidence quality (drawings and schedules versus marketing text), and commercial clarity (what is excluded as much as what is included). A supplier who answers all of it cleanly on paper will almost always be less expensive at handover than one with a lower total and an empty appendix.

Note: dimensions and equipment counts quoted here follow the published catalog entry for WS-S12-T. Included equipment and electrical requirements vary by configuration, so confirm them for the exact build you are ordering before any structural or electrical work begins on site.

Send us the model reference, your site drawings and the specifications you have received, and we will return a configuration breakdown for Outdoor Swim Spa WS-S12-T with options priced separately — so your comparison sheet has something real to score.