Open modular wardrobes sit at an awkward point in a bedroom fit-out. They look light and generous on a rendering, they avoid the cost of a full run of doors and front panels, and yet a procurement team has to answer hard questions about dust, privacy and housekeeping before the first board is cut. If you are specifying them for a hotel guest room or a villa bedroom, the decision is rarely about style alone — it is about which rooms can carry an open system and which ones cannot.
This guide walks through how we at SANTERSON read a bedroom drawing when an open modular wardrobe is on the schedule: what to check in the room itself, how the modular format changes the way you order, and where these systems typically cause trouble once guests or owners move in.
What "open" and "modular" actually mean here
Two separate decisions are bundled into this one product name. Open modular wardrobes combine a hanging rail, shelves and drawer zones built from repeatable modules, with no doors across the front. The modular part is what makes them practical at project scale: bay widths, shelf heights and drawer stacks are set from a configurable grid rather than drawn one-off, so a run can be shortened or extended on site without re-engineering the whole unit.
The alternative in our catalogue is a closed system — combination modular wardrobes, or wardrobes with hinged, sliding or glass fronts. Those hide the contents; an open system commits you to how the clothes look. That single difference drives most of the specification decisions below.
Where an open wardrobe earns its place
In a villa, an open run usually works because it is part of a larger built-in wall. In one whole-house project we delivered, a full-height closed section handled everyday clothing while open niches with LED lighting carried display pieces — the open and closed parts were designed together as one joinery elevation, not ordered separately. The same logic applies to open walk-in wardrobes: the dressing space is already a separate room, so nothing is exposed to the bedroom and dust drifting in from the sleeping area is less of an issue.
Other situations where the open format tends to hold up well:
- A dressing vestibule or corridor between bedroom and bathroom, where the wardrobe forms the partition and sits outside guest sightlines.
- Serviced apartments and long-stay suites, where guests unpack and stay for weeks, so hanging space matters more than visual tidiness.
- Villa master suites with a separate laundry or store, so out-of-season items have somewhere else to go.
- Display-led styling, where the client wants textiles, bags and shoes visible as part of the interior scheme.
Where it creates problems you will inherit
Be honest about these before signing off. In a standard hotel guest room, an open wardrobe faces the bed, and every housekeeping cycle becomes a restocking exercise — hangers aligned, folded stacks rebuilt, and each shelf board dusted to the same standard as furniture rather than a single wipe across a door face. Over years of operation that recurring labour often outweighs the saving on fronts.
Three practical checks we run against the drawings:
- Housekeeping time per room. Count the open shelf boards in the run. Each one is a dusting surface that has to be cleaned every turn-down, not just at deep clean.
- Storage mix for the guest profile. Business travellers on two-night stays need hanging space and a safe; long-stay guests need drawer volume. A shelf-heavy module set is the wrong answer for the second group.
- Wall clearance, skirting and levels. Modular runs are built to a grid, so an out-of-square wall or deep skirting has to be resolved in setting-out — otherwise scribes and packers appear on site and the clean facade is lost.
For rooms where exposure is a genuine concern, we usually split the elevation: open modules for display and daily hanging, closed modules alongside — or glazed fronts such as glass modular wardrobes — for the items that need to be out of view. A mixed elevation almost always reads better than a fully open wall.
How to specify the modules themselves
Once you accept the open format, the detail decisions are about proportion and use rather than appearance. Work through them in this order:
- Hanging first. Set rail heights for long and short garments before allocating anything else — hanging modular wardrobes define the vertical rhythm the rest of the run follows.
- Drawer zones where hands are free. Socks, underwear and folded knitwear belong below waist height, so drawer-focused modular wardrobes work best in the lower third of a run.
- Shelves sized to the stack, not to the module. Shelf-focused modular wardrobes disappoint when spacing is left at a default and half-height gaps appear; set spacing from the folded stack you intend to store.
- Lighting in the module, not on the wall. Integral LED strips at rail and shelf positions are what stop an open run from reading as dark shelving, and they need cable routes decided before the carcass is built.
- Finish continuity with the rest of the joinery. The same board, edge banding and handle detail should carry across wardrobes, vanity units and wall panelling, otherwise the open run looks like loose furniture dropped into a fitted room.
Our modular wardrobe lines are made to measure — dimensions, layout, materials and finishes are set per project rather than picked from fixed sizes. Because of that we ask for the bedroom elevation and the storage brief together; a run specified by width alone tends to arrive with the wrong internal mix.
Ordering it as part of a fit-out, not as a separate line item
Wardrobes rarely fail on their own; they fail at the interfaces — with flooring, skirting, lighting circuits, bathroom walls and the delivery sequence. That is why we handle them inside turnkey interior project solutions rather than as a standalone supply order: measurement, 3D design, production, freight and on-site installation are coordinated against one programme, and the wardrobe wall is drawn alongside built-in furniture, wall panelling, lighting and bathroom fixtures for the same room.
For villa work this matters especially, because one supplier sees the whole elevation. In a mid-century whole-house project we produced, the bedroom joinery, bay-window seating, entrance cabinet and sideboard shared the same board and handle language — an open wardrobe in that context is one element of a designed wall, not a storage unit bought separately.
A short pre-order checklist
- Room-by-room decision: which bedrooms take open fronts, which need closed or glazed fronts.
- Housekeeping cycle costed for open shelf boards, not assumed to be free.
- Rail heights and drawer zones set from the guest or owner profile before shelf spacing.
- Integral lighting and cable routes resolved at design stage.
- Setting-out against floor levels, skirting and out-of-square walls confirmed on site.
- Board, edge and handle details matched to the rest of the joinery package.
- Delivery window aligned with wet trades and flooring so carcasses are not stored on site.
If you have bedroom elevations for a hotel or villa scheme, send them across with your storage brief. We will tell you honestly which rooms should keep the wardrobe closed — and quote the open modular runs where they genuinely work.
SANTERSON — furniture and building materials manufacturer, one-stop supplier for hotel, villa and office projects. Contact: PHILLIP · Phone/WhatsApp +86-13928214007 · Email santerson@qq.com · Make an enquiry