A freestanding cabinet looks like a small item on a hospitality FF&E schedule until it has to be specified, sampled, shipped and installed across dozens of rooms at once. In a hotel, serviced apartment or resort project, the storage and display units you choose for corridors, guest floors and public lounges end up in every variation sheet, packing list and snag list that follows. This guide walks through how we plan procurement of the Santerson Freestanding Cabinet for a hospitality project — from the room-by-room schedule to finishes, sampling, logistics and handover.

Start with a room-by-room schedule, not a product photo

Before any enquiry goes out, build a schedule that lists each unit location, the required height, width and depth, the door or open-shelf layout, and the finish. Our freestanding display cabinets are made to measure: dimensions, internal layout, materials and surface finishes are specified per project rather than chosen from a fixed size run. That flexibility is an advantage for hospitality work, where guest-room joinery, lobby display units and back-of-house storage rarely share one module.

In practice we ask procurement teams to issue the schedule as a simple table: reference code, room or area, quantity, dimensions, finish code, hardware preference and installation window. Anything ambiguous at this stage becomes a change order later, so the extra hour spent on the schedule is usually the cheapest money in the whole package.

Decide what the cabinet has to do before deciding how it looks

The same silhouette serves very different jobs. A lobby unit may need glass-fronted display shelving and concealed lighting for merchandise or decorative pieces. A guest-floor unit usually needs closed storage, a durable edge treatment and hardware that survives daily use by strangers. A lounge unit often sits in an open plan and has to read as furniture from both sides.

Write the function into the specification first — load, contents, cleaning frequency, exposure to sunlight or humidity, whether the unit is fixed or relocatable — then select materials and finishes against those requirements. Where a project also needs bathroom-side storage, the Santerson Freestanding Cabinets in our storage units range are specified the same way, with made-to-measure sizing and finish options matched to each space.

Lock finishes, hardware and tolerances on a signed sample

Colour and texture on a screen are not colour and texture under a lobby chandelier. For any hospitality order we recommend approving one full sample unit before production begins: it lets the designer check the veneer or lacquer tone against the rest of the palette, the operator check door action and handle feel, and the site team check how the unit arrives and what it takes to install.

Use the sample to fix the details that repeat across a whole order — edge banding, reveal gaps between doors, plinth or recessed base, integrated lighting and its wiring route, anchoring method for taller units, and the protection packing each piece travels in. Sign off the sample physically, keep it on site as the reference standard, and refer to it during inspection.

Group the order with related fit-out items

Freestanding cabinets rarely travel alone. When they are ordered alongside cabinetry, wardrobes, wall panelling, lighting or sanitaryware from one supplier, the project gains a single production schedule, one packing list per container and one point of accountability for shortages. As a China-based manufacturer and one-stop supplier of furniture and building materials, SANTERSON covers this combined scope under turnkey interior project solutions, so the storage units and the joinery around them are produced to the same drawings and finish standards.

Grouping also simplifies spare-parts planning. Hardware, replacement doors and shelf components ordered in one batch can be held in the site store for the maintenance team, instead of chasing a separate vendor two years after handover.

Plan freight, sequencing and storage on site

Freestanding units are bulky and easily damaged at corners, so they should not be the first shipment to arrive on a busy site. Sequence delivery against the fit-out programme: casework and fixed joinery first, then freestanding pieces once wet trades have finished and floors are protected.

We handle freight forwarding by sea, air and rail with customs paperwork, container loading plan and door-to-door delivery, and we label every crate with the schedule reference code so the site team can route each unit straight to its room. Confirm import terms, duties and delivery address access for your specific project before the order is placed, and make sure there is dry, secure staging space for the units between delivery and installation.

Install, inspect and close out with a snag list

Installation should end with a documented inspection: doors aligned and closing squarely, drawers running smoothly, anchoring verified on every unit above the height your risk assessment requires, lighting circuits tested, and surfaces free of transit damage. Photograph the completed units room by room against the schedule; that record protects both parties during handover and makes warranty claims unambiguous later.

Close out with a signed snag list, a spare-parts inventory handed to facilities, and the approved sample unit either installed in a low-risk location or retained as the maintenance reference. Our installation and after-sales support covers this stage, including inspection and replacement of damaged components.

What to send us for an accurate quotation

  • The room-by-room schedule: reference code, area, quantity, dimensions, layout and finish code per unit.
  • Drawings or photographs of the space where each unit will stand, including floor finishes and skirting details.
  • Your preferred internal configuration — shelves, drawers, hanging rail, glass fronts, lighting.
  • The programme: sample approval date, production window, delivery port or site address, installation dates.
  • Any related items to be grouped in the same order, such as wardrobes, vanities, panelling or lighting.

Send that package and we can return a specification-matched quotation with realistic production and shipping windows rather than an estimate based on a photograph. For projects still shaping their storage strategy, our interior design services cover space planning, furniture layouts and 3D renderings before anything goes into production.

Frequently asked questions

Can freestanding cabinets be made to non-standard sizes?

Yes. Made-to-measure sizing is standard on these units; supply the opening dimensions and the intended contents, and the carcass and internal layout are built around them.

Should freestanding cabinets be ordered with fixed joinery?

Where they sit adjacent to wardrobes, vanities or panelling, yes. Ordering them together keeps finishes, tolerances and delivery on one schedule.

When should the units arrive on site?

After wet trades and fixed joinery are complete, with protected floors and dry staging space available. Delivering them early is the most common cause of avoidable damage.

Tell us which areas need storage and what has to live inside each unit, and we will specify the cabinets around that brief. Contact SANTERSON — PHILLIP, +86-13928214007, santerson@qq.com — or use the form on our contact page to start a quotation.