A solid colour wardrobe looks simple on a mood board and complicated on site. The panel reads as one flat, calm surface, so any mismatch between drawing and delivery shows up immediately: a door that is half a millimetre out of alignment, a tone that shifts under bedroom lighting, an edge band that does not match the face. Designers draw what they see in their head; buyers sign off on price and lead time. Both sides think they are describing the same object. This article sets out the six decisions both parties need to write down before production starts.
1. The Exact Colour Reference, Not a Colour Name
"Matte grey" means nothing on its own. Suppliers work from board laminates, and every laminate range carries its own colour codes, sheen levels and texture depth. Ask for the physical sample or the supplier's finish code, then record which one was approved. In a villa or apartment package with several bedrooms, this matters twice over: panels produced in different batches can vary slightly, so units that will sit side by side in one sightline should be specified as one production batch.
Our Solid Color Melamine Wardrobes are made to measure with material and finish options selected per project, which means the finish you approve is the finish that gets ordered — but only if the approved sample, code and sheen level appear in the order record.
2. Sheen Level: Matte, Glossy or Something in Between
Two panels can share a colour name and behave completely differently under light. A matte surface absorbs light, hides fingerprints and keeps a bedroom quiet; a glossy surface reflects it, brightens a narrow room and shows every smudge. Decide this before the render, because sheen changes how the whole elevation reads.
| Sheen choice | Where it works well | What to watch for |
|---|---|---|
| Matte Finish Melamine Wardrobes | Minimalist and handleless bedrooms, larger wardrobes that span a full wall, hotel rooms where the unit should recede into the wall. | Deep matte surfaces can show skin marks on high-touch zones near handles and drawer fronts. |
| Glossy Finish Melamine Wardrobes | Compact bedrooms, apartments with limited daylight, wardrobes used as a light-reflecting surface opposite a window. | Reflections pick up bed linen, ceiling fittings and any wall unevenness nearby. |
| Textured Melamine Wardrobes | Projects that want a solid colour with some surface depth rather than grain, and high-use residential or guest-room joinery. | Texture direction must be consistent across panels, so note the grain direction on the drawing. |
3. Where the Colour Stops: Doors, Carcass, Edges and Interior
The most common disagreement we see is scope. A quotation may cover door panels in the chosen colour and leave the carcass, edge banding and interior boxes in a default decorative board. Neither choice is wrong; an undocumented one always is.
- Door faces: the specified solid colour, with the approved sample code noted.
- Edge banding: matching, contrasting or neutral — state which, because an unmatched edge is visible from standing height.
- Carcass and exposed returns: side panels that face into the room usually need the same colour as the doors; internal carcass often does not.
- Interior boxes and shelves: a lighter interior board makes contents easier to see, which is worth specifying for walk-in layouts.
If part of the elevation should read as one continuous surface and another part as an inset, that split belongs on the drawing. Two Tone Melamine Wardrobes exist for exactly this situation, and pairing them with a single-colour run in the same bedroom requires both tones to be named on the same sheet.
4. Door System and Hardware, Because They Change the Drawing
The door type drives clearance, ceiling detail and adjacent furniture, so it should be fixed before the wardrobe is drawn into the plan.
- Hinged doors need swing clearance and a clear path in front of the unit.
- Sliding doors save floor space but need track depth at the head and cannot be flush on both sides at once.
- Handleless fronts require a profile, groove or push mechanism — decide which, since each reads differently in shadow.
- Internal fittings: hanging rails, drawer banks, shelf stacks and pull-out accessories should be shown on the layout, not agreed after delivery.
For layouts that need more than a standard box, our Custom Minimalist Bedroom Wardrobe work covers sizes, internal layouts, door styles and surface finishes as one package, which keeps the hardware decision inside the same drawing set instead of splitting it between two trades.
5. Tolerance, Site Conditions and the Interface With Walls and Floors
Solid colour panels are unforgiving of an out-of-plumb wall. Before final dimensions are locked, both parties should confirm:
- Which finishes are already in place — plaster, paint, flooring, skirting, ceiling cornice — and which come after the wardrobe.
- Whether the unit is scribed to the wall or framed with a shadow gap, and who supplies the scribe or filler.
- Floor level across the run, since a wardrobe spanning three metres inherits any fall in the slab.
- Where lighting, switches and air-conditioning outlets sit relative to the front plane.
- Whether wardrobes in different rooms are one batch or separate deliveries.
Made-to-measure sizing only helps if it is measured off a finished space. A dimension taken from a construction drawing and applied to a completed room is where alignment problems usually begin.
6. What Buyers Should Put in the Enquiry
A complete enquiry shortens the quotation round and removes most of the arguments later. Send:
- Room elevation or layout with overall widths, heights and depths marked.
- Finish code plus sheen level, and the approved physical sample if one was issued.
- Door system, hardware preference and internal layout sketch.
- Scope split for carcass, edges, returns and interior boxes.
- Project location, delivery point and installation responsibility.
We work as a custom furniture manufacturer, so wardrobe joinery can be produced to the drawing rather than to a catalogue size. Wardrobes also sit inside a wider fit-out — kitchen cabinetry, wall panelling, doors, flooring and lighting — which is where our turnkey interior project solutions come in: one supplier carries the joinery scope alongside the rest of the package. For multi-bedroom villa and apartment projects, that single point of coordination is what keeps finishes consistent from room to room.