A backlit feature wall usually arrives on a supplier's desk as a picture. The client sends a render, someone says "we want this glow behind the bed", and the enquiry stops there. What comes back is a price that fits nothing, because the image carried no dimensions, no switch logic, no cable route and no finish decision. If you are specifying Santerson Backlit Feature Walls for a villa bedroom, a hotel headboard wall or a living-room media elevation, the difference between a smooth order and a stalled one is almost entirely what you put in the first message.

This guide walks through the information we actually need to quote and build the wall properly, with an editable checklist you can paste into your own brief before you send it.

Start with the room, not the reference photo

Reference images are useful for mood and unhelpful for measurement. Before anything else, tell us where the wall is going and what it has to do. A backlit wall in a private villa works to a very different set of constraints from one in a guest room that gets cleaned every day and switched by six different guests.

Useful framing looks like this: which room, which wall, how large the usable run is once doors, skirting, wardrobes and services are accounted for, and whether the wall is decorative only or also carries a television, storage, shelving or a headboard. In our Media & TV Walls collection, backlit feature walls sit alongside Santerson Full Height Media Walls and Santerson Integrated TV Panels, so it is worth saying early whether lighting is the whole point or one layer of a larger built elevation.

The six items that decide the quotation

ItemWhat to state in your enquiry
Wall geometryOverall width and height of the finished face, plus ceiling height, floor finish build-up and any recess, return or corner you want carried through.
LayoutSymmetry, module widths, where breaks fall relative to the bed or sofa axis, and whether outlets, thermostats or access panels have to be kept clear.
FinishVeneer, lacquer, laminate, stone-look or textured panel direction. Send samples or a sample number if you already hold them; otherwise state the tone and sheen you are working to.
Light effectWhere the light should read from — edge glow, backwash onto the wall surface, niche uplight, or illuminated reveal lines between panels — and how strong it should look at night versus in daylight.
Switching and controlWhich switch or scene controls it, whether it is dimmed, and whether it needs to sit on the same circuit logic as the rest of the room lighting.
Site conditionsSubstrate type, whether the wall is load-bearing or a new frame, existing cable routes, and who is doing the electrical connection on site.

Every one of these items changes panel construction, not just the fitting. A wall that glows from behind a floating panel needs a different substrate build than a wall with illuminated grooves cut into a flat face, and neither behaves like a surface-mounted strip light added after the joinery is complete.

Why dimensions and lighting specification come back to you

Our configurable listings in the Media & TV Walls range are set up for project-specific dimensions and finish options, which means we confirm dimensions and lighting specification for each project before production rather than quoting from a catalogue size. That step is not bureaucracy. Panel spans determine how the substrate is built and how flat the finished face stays. Light position determines how much depth the wall takes off the floor, which in turn decides whether a wardrobe door or a curtain still clears it.

Electrical detail has the same effect on the joinery side. The driver, its access point and the cable route all need somewhere to live inside the build, and an inaccessible driver behind a fixed panel becomes a maintenance problem on day one. Where a scheme also uses Santerson Integrated Cabinet Lighting or an illuminated display cabinet in the same room, we look at those specifications together so one electrician is not left reconciling three different control setups on site.

Send drawings if you have them, sketches if you do not

A marked-up elevation drawing is the fastest route. If you do not have one yet, a hand sketch with dimensions written on it, a phone photo of the wall from straight on, and a note of what is above and beside it are enough to start. What we cannot work from is a single cropped interior photograph with no scale reference.

If the design is still open, say so plainly. Our interior design services cover space layout planning, concept development and 3D visual renderings, along with drawing and production coordination, so an enquiry at concept stage is normal and often the better time to involve the factory. Deciding the wall before the flooring, skirting and ceiling details are locked avoids the awkward situation where a finished panel size is dictated by someone else's tolerance.

Specify it as part of the fit-out, not as a purchase

A backlit wall touches four trades: joinery, electrical, plasterboard or framing, and finishing. Where possible, group it with the other built elements in the same room when you enquire — wardrobes, media storage, vanity units, panelling and doors. We work as a one-stop furniture and building materials supplier, so the same production and coordination covers all of it, and matching veneer or lacquer across a wall and its adjacent cabinetry is far easier to guarantee when the panels are made in one run.

For whole-room or whole-property work, Turnkey Interior Project Solutions covers design and planning, production, logistics, installation and after-sales as a single package. That matters most on overseas projects, where an error found after the container has left is expensive to correct. Where you want your own profile, edge detail or finish that is not in our standard range, Custom Furniture Manufacturer work under the Custom & OEM service covers bespoke finishes and detailing against drawings.

Copy-paste enquiry checklist

  • Project name, delivery city, and whether this is a private residence, hotel or hospitality scheme
  • Room and wall: which room, which wall, overall finished width and height
  • Function: light only, or plus TV, storage, shelving or headboard
  • Layout sketch or dimensioned elevation, plus a straight-on photo of the site wall
  • Finish direction: material family, tone, sheen, sample reference if held
  • Light effect wanted and where it should read from
  • Switching and dimming intent, and who controls the room lighting
  • Substrate and site conditions, existing cable routes, access requirements
  • Quantities: how many walls or rooms repeat the same detail
  • Your decision dates and required delivery window

Send the checklist with whatever you already have. Partial information is fine at the start — we will come back with specific questions on the gaps rather than guess at dimensions, electrical specification or finish.

What happens after you send it

You get a review of the wall against the drawings and site conditions, then questions where the information is thin. Once dimensions, layout, finish and lighting specification are agreed, the wall goes into production with the rest of the room's joinery, packs for shipment, and arrives ready for the on-site connection to be made by your electrician. Enquiries for Santerson Backlit Feature Walls can be sent with the room, dimensions and finish direction stated in the first message so the review starts immediately.

The wall in the photograph you sent is somebody else's answer to their room. The one we build for yours needs your dimensions, your switching arrangement and your finishes — and that is exactly what a good enquiry carries.