A double basin countertop rarely arrives on site as a stand-alone item. On villa and apartment fit-outs it sits inside a larger package of vanities, toilets, showers, lighting, cabinetry and wall finishes — and that is exactly where budget overruns begin. This guide walks through how to scope and cost the Santerson Double Basin Countertop as part of a multi-product project, so the wash station is priced against real drawings rather than an early guess that has to be revised later.
Start From the Room, Not the Product
The countertop is a made-to-measure item. Finish, layout and dimensions are specified per project, which means its price cannot be read off a catalogue line. Before any number is meaningful, three things need to be fixed on paper:
- The clear wall-to-wall length available in the bathroom, plus where the door swing and towel rail interrupt that run.
- Which basin type sits in the top — undermount, integrated, or an above-counter vessel basin — because each one changes the cut-out, the deck height and the tap reach.
- Whether the countertop lands on a vanity carcass or on site-built joinery, since that decides who is responsible for the support frame and the cut tolerances.
A practical sequence works well: confirm the layout of the wet areas first, then fix the basin type, then specify the top. Reversing that order is how projects end up with a countertop ordered to one set of dimensions and a vanity built to another.
What Actually Drives the Cost
Once the layout is fixed, the price moves with a small number of decisions. Being explicit about each one keeps quotations comparable between rooms and between suppliers.
| Cost driver | What to decide before requesting a quotation |
|---|---|
| Surface material | Stone or marble from the Santerson Stone & Marble Surfaces range, or an engineered alternative. Slab choice affects veining direction, edge build-up and how much wastage a given length produces. |
| Basin integration | An Integrated Basin forms one continuous surface with the top; an Santerson Undermount Basin needs a cut-out and fixing detail; a Santerson Vessel Basin (Above Counter) sits on the deck and changes tap and mirror heights. |
| Basin spacing | Distance between the two wastes, plus clearance at each end. This is set by who uses the room and by where the waste outlets can realistically be placed in the floor or wall. |
| Cut-outs for taps and overflow | Number of tap holes, deck-mounted versus wall-mounted taps, and whether the overflow is concealed. |
| Edge profile and upstands | Simple eased edge against a feature build-up; a rear upstand where the top meets a tiled wall adds a separate operation. |
| Support structure | A Santerson Double Vanity or Santerson Integrated Countertop Vanity carries the top; open spans and long cantilevers need to be declared at the quotation stage, not discovered during installation. |
| Site access and fixing | Lift size, stair width and floor level affect how a heavy stone top is delivered and set. Confirm these with the site contractor before ordering. |
Because dimensions are project-specific, ask for the quotation itemised by room and by element — surface, basin, cut-outs, edge work, support — rather than one blended figure per bathroom. An itemised quotation is what lets you compare a guest bathroom against a main ensuite, and what makes substitutions transparent when value engineering comes around.
Scope It With the Rest of the Package
The real saving on a multi-product project is coordination, not unit price. When the countertop and everything around it are specified together, interfaces get resolved once instead of three times.
Fixtures and fittings
Basin, toilet, bidet and shower all connect to the same wall and floor zones as the countertop. Specifying them in one pass keeps waste outlets, tail pieces and supply lines consistent across rooms — for example pairing a bathroom sanitary fixture selection with the tap and waste schedule that the tops are cut for.
Lighting and mirrors
Vanity lighting and mirror height depend on the finished deck height and on whether basins sit in or on the top. Lighting positioned against an assumed countertop is lighting that has to be re-set on site.
Cabinetry, wall finishes and flooring
Where a bathroom meets engineered timber flooring, wall panelling or a tiled recess, the junction detail belongs in the same drawing set as the countertop. Built-in cabinetry and joinery packages are usually priced and produced alongside vanities, which is where a single supplier covering both avoids duplicated measurement visits.
A Workable Procurement Sequence
SANTERSON works projects from design consultation and space planning through material selection, product specification, manufacturing and quality control, project management and site coordination, to final installation and handover. Applied to a double basin countertop inside a larger package, that sequence looks like this:
- Brief and layout. Room dimensions, elevations, occupant requirements, and the list of rooms sharing a bathroom specification.
- Specification. Surface material and slab, basin type and model, tapware schedule, edge profile, support structure — recorded per room.
- Quotation and detail confirmation. Itemised by element; drawings signed off before production is released, including cut-out positions and waste locations.
- Production. Made-to-measure fabrication against the confirmed drawings, with finish samples approved in advance where veining or grain matters.
- Logistics. Consolidated shipment with the rest of the package; packaging and container loading planned around fragile stone tops.
- Installation and handover. Setting the top, connecting basins and taps, then inspecting joints, seals and falls with the site contractor.
Freight is typically arranged through global forwarding by sea, air or rail with customs paperwork and door-to-door delivery. For a stone countertop, confirm packaging, insurance cover and the receiving arrangement at the property before the container moves — damage claims are far harder to resolve once a top has been set on a vanity.
Budget Checkpoints Before You Order
- Drawings show the countertop length, both waste positions and tap holes — not a generic bathroom layout.
- The basin type is named for each room, so cut-out and deck-height details follow from it.
- The slab or surface is selected and approved, with veining expectations agreed for the actual piece being fabricated.
- Support responsibility is assigned in writing: supplier-made vanity, site joinery, or steel frame.
- Cut-outs, edge profile and upstands are itemised on the quotation rather than bundled.
- Delivery route, lift or stair access and setting crew are confirmed against site conditions.
- Spares and matching pieces for later phases — identical finish for a second villa phase or a duplicate guest bathroom — are noted at order stage.
Common Questions
How early should the countertop be locked down?
Before wall finishes and floor levels are fixed, but after the waste and supply positions are decided. That ordering avoids re-cutting tops and re-tiling around a late change.
Can two bathrooms use the same specification at different sizes?
Yes. Layout and dimensions are specified per space, so a guest powder room can repeat the material and basin selection of a main ensuite at a shorter run — provided tap reach and basin spacing still work at the reduced length.
Should the countertop be ordered separately from the vanity?
Ordering them together keeps the support frame, cut-outs and overhang in one fabrication package. Where site joinery carries the top, hand over the confirmed countertop drawing to the joinery contractor before their units are built.
What information speeds up an accurate quotation?
Room elevations with dimensions, the selected surface material, the basin model for each position, tapware type and mounting method, and a note on whether the top is supported by a supplied vanity or site-built carcass.
Specifying a double basin countertop alongside vanities, sanitary fixtures, lighting and cabinetry keeps one coordinated budget across the whole bathroom package. Send us your room drawings and fixture schedule for an itemised quotation and made-to-measure fabrication — see our turnkey project solutions or our services.