Mixed open & closed joinery looks simple on a rendering: some shelves on show, some doors hiding the clutter. On site it is where variation creep shows up first — one supplier's "open shelf" is another's carcass with a different panel thickness and span, and every mismatch lands on the installer's day. If you are specifying Santerson Mixed Open & Closed Systems for an Australian villa or apartment fit-out, the questions below are the ones worth putting in writing before you place a purchase order.
What these systems actually cover
SANTERSON lists two related product lines rather than one SKU. Mixed Open & Closed Systems sits in the Modular Living Systems collection and is written up for residential living projects, with made-to-measure sizing plus selectable materials and finishes. Santerson Mixed Open & Closed Storage sits in the Integrated Storage Walls collection and is described as a configurable combination of open and closed storage within an integrated wall system. Both are catalogued with project-specific dimensions and finish options, not a fixed off-the-shelf size range.
That "project-specific" wording matters for procurement. The catalogue copy directs buyers to confirm dimensions, storage layout, finish and technical specification for the configuration actually being ordered — so your verification list should be built around the drawing set you approve, not around a brochure page.
Verify 1: which collection and which scope
Confirm on the purchase order which line you are buying. A modular living system for a lounge wall, an integrated storage wall spanning floor to ceiling, and a media unit with open and closed compartments each carry different fixing details, services routing and interfaces with flooring and cornices.
- Ask for a room-by-room schedule: item code, collection name, overall width/height/depth, and which bays are open versus closed.
- State the boundary of supply — plinth, cornice, back panels, internal shelving, doors, handles, integrated lighting and any glass all need to be named or excluded.
- Ask how carcasses join to plasterboard, engineered timber flooring and existing skirting in your drawings, because those interfaces are where site variations get expensive.
Verify 2: dimensions, tolerances and the finish sample
Made-to-measure means your measured dimensions become the manufacturing dimensions. Send surveyed drawings with completed-floor and completed-wall levels marked, and ask the factory to return shop drawings showing shelf spans, door reveal, and where field-adjustable scribes sit.
- Request written tolerances for opening widths, panel flatness and shelf deflection under load for the span you are specifying — long open shelves fail on the span, not the material.
- Order a physical finish sample in the same batch colour as the doors, carcass exterior and visible shelf edges; veneer and laminate tones read differently across finishes even within one range.
- Confirm which substrate each finish is applied to (veneer, lacquer, melamine, acrylic or glass front) and how edges are handled on open bays where the edge stays visible.
Verify 3: hardware, moving parts and lighting
Open-and-closed combinations live or die on hardware. Hinges, slides, lift systems and any integrated lighting are usually specified separately from the panel schedule, so put them in the order line by line.
- Name hinge and slide brands or model series, soft-close behaviour, and load ratings for drawers and pull-outs.
- For sliding variants in the wider range — such as closet sliding panels or sliding storage panels — confirm track type, floor clearance and how the track is set into a completed timber floor.
- If you want lit niches, ask for the driver location, cable routes and whether lighting is supplied with the joinery or left to your electrician. Cabinet-integrated lighting options are listed separately in the catalogue, so do not assume they come attached.
Verify 4: packaging, freight and arrival condition
SANTERSON describes global freight forwarding by sea, air and rail, with customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. For a panel-heavy order the practical questions are about protection and sequence, not just transit time.
| Ask | Why it matters in Australia |
|---|---|
| Panel orientation, corner protection and separate packing for glass | Doors and veneered panels are the parts damaged in transit; replacements restart the whole schedule. |
| Packing list keyed to your room schedule | Installers need to know which crate belongs to which wall, or a four-bedroom job stalls on day one. |
| Delivery terms and who handles customs clearance and last-mile to site | The service page describes door-to-door delivery and documentation; Incoterms, duties and site access still need confirming for your project. |
| Inspection window on arrival | Agree how damage is photographed, reported and replaced before containers leave the wharf area. |
Verify 5: installation, snags and after-sales in your state
The company's service pages list on-site installation, inspection and snags, warranty coverage, spare parts or replacement, and ongoing maintenance. Those are the right headings to hold a supplier to — but the detail is project-specific. Ask who physically installs in your state, whether that is a factory-supervised crew or a local joiner working from shop drawings, and how snags are recorded and closed out.
Get the warranty terms in writing: what is covered (panels, finishes, hardware), what excludes site damage and misuse, how spares for a discontinued handle or veneer are sourced later, and the response time agreed for your contract. Marketing pages state fast response aims; your contract should state the one that binds.
How this fits an Australian project workflow
SANTERSON's stated cooperation steps run from project brief and design proposal to quotation and detail confirmation, then production, shipment and follow-up. The service navigation also covers interior design support, custom/OEM work, logistics and after-sales, which is the shape of furniture sourcing for Australian projects that keeps one party accountable for joinery, finishes and delivery. For mixed open & closed joinery the useful part of that workflow is the middle: every dimension, finish and hardware item you lock down during detail confirmation is one site variation you never pay for.
The firm has been furnishing projects since 2008 and its published case list includes villa work in Sydney, Melbourne, Perth, Willoughby and North Turramurra. Treat those as project references to question, not as proof of local stock, local certification or compliance with Australian standards — raise standards questions with your certifier and let the supplier answer them with test documents for the specific board and finish you are buying.
A short pre-order checklist
- Collection and item code named on the order (Modular Living Systems vs Integrated Storage Walls).
- Full scope schedule: open bays, closed bays, doors, glass, lighting, exclusions.
- Shop drawings returned and signed, with tolerances stated.
- Finish samples approved in the destination's light, not the showroom's.
- Hardware specified by model, with load ratings for pull-outs and long spans.
- Packaging, packing list and delivery terms agreed in writing.
- Installer identity, snag process and warranty terms confirmed for your state.
Product scope, dimensions, finishes, hardware and technical performance are confirmed per project configuration; the catalogue describes these systems as made to measure with selectable materials and finishes. Standards compliance, delivery schedules and warranty terms should be agreed in your contract documents.