A floating vanity can make a shared guest bathroom read as calm, modern and easy to clean — but only if the specification is settled before purchase orders go out. Wall-hung joinery touches the frame, the drainage run, the countertop, the mirror and the lighting circuit at once, so a hospitality project that treats it as a late-stage accessory usually pays for it later in variations and site delays.
This guide walks through how buyers, contractors and interior consultants can plan the Santerson Floating Vanity across a hotel, serviced apartment or resort project: what to lock down room by room, which interfaces to coordinate early, and how a single supplier covering sanitary fixtures, joinery, lighting and accessories can reduce the number of parties you have to manage.
Start With Room Types, Not Product Codes
Hospitality bathrooms are not one identical space repeated many times. Standard guest rooms, accessible rooms, suites and back-of-house facilities each put different demands on a vanity, so the first step in procurement is grouping them into a small number of repeatable types and defining the vanity for each type separately.
For standard rooms, the questions are practical: how much counter surface does a guest actually need, whether storage should sit in drawers below the basin or in a mirror cabinet above it, and whether the same module can be mirrored left and right to serve opposite-hand room layouts. Suites usually call for wider runs, and that is where the Santerson Double Vanity becomes relevant — two basins on a single made-to-measure unit, rather than two separate cabinets butted together.
Accessible and family rooms introduce another layer: clear floor space beneath the wall-hung unit, positioning of grab rails relative to the cabinet, and basin height. Because floating vanities are fixed to the wall rather than standing on the floor, these decisions change the reinforcement in the wall behind them, which is exactly why they belong in the early design stage and not in a site variation.
What a Made-to-Measure Specification Has to Cover
The Floating Vanity sits in a Vanities collection that also includes single, double and integrated countertop configurations. Across the range, sizing is made to measure, materials and finishes are selected per project, and the layout is tailored to each space rather than fixed to one catalogue dimension.
In practice that flexibility is what makes the product work in a project with repeated but not identical bathrooms — and it is also where procurement risk sits. Each variable you leave open comes back as a question during production. A workable specification sheet for a hospitality project normally settles:
- Overall dimensions — width, projection and depth of the box, plus the finished floor-to-underside clearance you want under the unit.
- Material and finish — the board and surface selected for a high-moisture, high-handling environment, in the tone matched to the wider joinery package.
- Layout — drawer configuration, whether the interior is open or divided, and how the unit relates to the trap and waste position.
- Basin and countertop pairing — integrated, undermount or above-counter vessel, each of which changes the top of the unit and the tap reach required.
- Hardware — handles or handleless fronts, soft-close runners, and how those choices are repeated consistently across guest-room types.
Santerson's product pages list these as configurable options rather than fixed data. Confirm the dimensions and selected specification for every configuration before ordering, and record them in a schedule that your site team can check against on delivery.
Coordinate the Interfaces Before You Order
Most floating vanity problems on site are not defects in the cabinet. They are clashes with something installed by another trade. Buying the vanities as part of a wider fit-out package makes it easier to resolve those clashes on paper, because the same supplier is seeing the wall, the top, the mirror and the lighting together.
- Wall structure and fixing — wall-hung units need solid support behind the fixing line. Where partitions are lightweight, reinforcement has to be designed in before the lining goes up.
- Drainage and waste — trap position sets how the base of the cabinet is drilled and how deep the unit can sit against the wall. Fix this per room type, not per floor.
- Countertop and basin fit — an above-counter vessel basin, an undermount basin or a single integrated top each need a different deck. Decide once, then apply it consistently.
- Mirror and electrical — an LED mirror cabinet requires a spur in the right place, and its depth affects how far the unit projects from the wall. Confirm lighting and electrical specification per configuration.
- Vanity lighting — task lighting at the mirror should be planned with the vanity width, so guests are not left with a shadowed face or a fitting that overhangs a narrow unit.
Order by Type, Deliver by Phase
Once the room types are defined, order against those types rather than against individual rooms. That keeps the number of distinct configurations small enough to control in production and simple enough for installers to learn.
Then phase delivery to match site sequence. Bathrooms are usually finished floor by floor, so a shipment plan that follows the construction programme avoids storing hundreds of cabinet boxes on a busy site and reduces damage. Santerson describes global freight forwarding by sea, air and rail, with customs paperwork, packaging and container loading planned for the project and door-to-door delivery to site. Confirm import terms, duties, Incoterms, insurance and transit time for your specific destination — these vary by country and shipment, and marketing copy is not a service guarantee.
What to Inspect on Arrival
A short receiving check saves weeks later. Before distribution to floors, confirm against the schedule:
- that each unit matches the room type it is labelled for, including left-hand and right-hand versions;
- that finish tones are consistent across boxes from the same batch, checked in daylight conditions;
- that cut-outs for traps and waste match the as-built drainage positions on a sample floor;
- that runners, hinges and any integrated lighting are complete and undamaged;
- that a small number of units can be dry-fitted on site before fixing begins.
A sample bathroom is worth building before the first production batch arrives in volume. It lets you test the clearance under the unit, tap reach, mirror position and lighting output with the client present, while changes are still cheap.
Reduce the Number of Parties You Manage
A guest bathroom specification typically spans vanities, basins, WC suites, showers, lighting, mirrors and accessories — often from several different suppliers. Each split creates an interface someone has to police. Santerson works as a China-based furniture and building materials manufacturer supplying one-stop project furnishing for hospitality, villa and office projects, with services that run from design consultation and material selection through manufacturing, logistics, installation support and after-sales.
That scope matters for a vanity package because the surrounding items come from the same coordination process: integrated countertop vanities where a seamless top is preferred, vanity lighting matched to the unit width, and stone or marble surfaces specified alongside the tops. Custom and OEM work also means finishes can be aligned with the joinery and wardrobe package elsewhere in the building, so guest bathrooms do not read as a different scheme from the bedrooms.
A Procurement Checklist for Your Next Enquiry
- A room-type schedule showing which vanity configuration applies to each bathroom type and how many of each are required.
- Made-to-measure dimensions per configuration, including the clearance you want under the unit.
- Selected material and finish, confirmed against the wider joinery palette.
- Basin and countertop pairing decided per type, with tap reach checked.
- Mirror, electrical spur and vanity lighting positions shown on coordinated drawings.
- Wall reinforcement and fixing details agreed with the structural and partition trades.
- Delivery phased to the construction programme, with import terms confirmed for the destination.
- A sample bathroom signed off before volume production.
None of these steps is difficult on its own. What determines whether a floating vanity package lands cleanly is whether they are settled before orders are placed — and whether one team is accountable for the whole bathroom specification rather than for a single cabinet.
Send SANTERSON your room-type schedule and drawings, and our team will specify floating vanities, basins, mirrors and lighting as one coordinated package for your project.
Contact: PHILLIP | Phone / WhatsApp: +86-13928214007 | Email: santerson@qq.com