A single basin rarely decides a bathroom budget on its own. In a villa, apartment or hotel guest-room fit-out, the wall-hung basin you specify shapes the wall framing, the drainage route, the tapware selection and even how many different SKUs your site team has to receive and store. This article uses the Wall Hung Ceramic Basin 1004B as the worked example, then shows how to scope and cost it together with the rest of the bathroom package so the numbers hold once the trade packages are let.

Start With the Fixture That Drives the Others

The 1004B is a wall-mounted vitreous ceramic basin with a glossy glaze and a trapezoid, square-cornered outline. It fixes to the wall from a back panel, leaves the floor clear, and carries a tap hole for a single faucet. The published page lists it at 510×420×380 mm and places it inside the 1004 sanitary series alongside the 1004A one-piece washdown toilet and the 1004S freestanding pedestal basin.

Why lead the budget with this item? Because a wall-hung basin is not a surface-mounted unit. The carrier, the concealed cistern if you pair it with a wall-hung WC, the waste and the tapware all sit behind or inside the wall build-up. Change the basin after framing and tiling start, and the rework cost lands on the carpenter, plumber and tiler — not on the ceramic.

Wall Hung Ceramic Basin 1004B, modern wall mount bathroom sink in a contemporary bathroom setting
Model 1004B wall-hung ceramic basin — compact footprint, floor left clear for cleaning.

The Six Cost Lines a Wall-Hung Basin Touches

When you build the bill of quantities, split the basin line into the items it actually pulls in. Quoting only the ceramic is where multi-product budgets go wrong.

Cost lineWhat to confirm before you price it
Basin and carrierBasin model, fixing method (back-panel wall fixing on the 1004B), and whether the carrier or in-wall frame is included in the quoted unit price or supplied by a local plumbing merchant.
Tapware and wasteThe 1004B has one tap hole for a single faucet, so basin-and-tap sets and mixer pricing follow from that. Confirm the waste type and whether it is included.
Wall build-upStud depth, noggings and tiling substrate needed to carry a wall-hung fixture. This is a trade cost, not a product cost, and belongs in your builder's package.
Drainage routeWall drain or floor drain, trap type and rough-in distance. Record the figure from the current technical sheet for each model rather than assuming one layout fits all rooms.
Vanity alternativeIf some rooms use a vanity instead of a wall-hung basin, price the floating vanity or double vanity as a separate line with its own countertop, basin and lighting interface.
Site handlingStorage area, protection of glazed ware before installation, and the number of distinct models your team must keep track of across room types.

Scope by Room Type, Not by Product Page

Multi-product projects get expensive when every bathroom is specified independently. Group the rooms and let one or two configurations carry most of the volume.

  • Principal bathrooms: wall-hung basin plus a matching wall-hung WC, with a floating vanity where storage is required. Specify tapware reach and countertop depth here, because this is where finish upgrades are usually requested.
  • Guest and ensuite powder rooms: the compact footprint of a wall-mounted basin keeps circulation clear. The 1004B suits these rooms, and pairing it with the 1004F wall-hung bidet keeps the outlines consistent where a bidet is in scope.
  • Shared and secondary bathrooms: if the wall build-up is already fixed or floor drainage dominates, the 1004S pedestal basin from the same series gives you a matching look without a concealed carrier.
  • Staff and public washrooms: hold the ceramic specification steady and vary only the consumable-adjacent items, so maintenance teams are not training on several fixture types.

Grouping this way means one set of rough-in details repeats across many rooms. Repeat is what protects the budget: fewer wall set-outs, fewer tile cuts, fewer variants in the container.

Consolidate With a Single Supplier Before You Discount

The most reliable saving on a multi-product fit-out is not a lower unit price on one basin — it is removing the interfaces where two suppliers argue about responsibility. Bathroom packages usually span ceramics, shower sets, vanities, mirror cabinets, lighting and wall or floor finishes. Buying those from a one-stop furniture and building materials supplier keeps specification, packing lists and after-sales questions on one thread.

SANTERSON works as a China-based manufacturer and project supplier covering bathroom ceramics, shower systems, vanities and mirror cabinets, kitchen cabinetry, wardrobes, lighting, wall panels, ceilings, flooring and outdoor furniture, with stated services in design coordination, custom/OEM production, logistics and door-to-door delivery, installation and after-sales support. Australian villa and apartment work — including the published Willoughby, Perth, North Turramurra, Melbourne and Sydney project references — is coordinated through that same workflow.

Practical consequences for your budget:

  • One packing list per container means fewer receiving errors and fewer replacements ordered in a hurry at local retail prices.
  • Series-based specification — the 1004 range, or the gold-line 1050 pieces for upgraded suites — reduces the number of distinct tap-hole, waste and mounting details your plumber has to work to.
  • Custom and OEM options on vanities, cabinetry and wall panels let you match finishes across rooms instead of buying off-the-shelf units that clash. Details are on the custom and OEM service page.
  • Freight, customs paperwork and container loading handled by one party keeps landed cost predictable. See logistics and door-to-door delivery, and confirm Incoterms, duties and transit time for your own port of entry.
  • Warranty, spare parts and snag items sit with one supplier rather than being split across three. Confirm the actual terms in writing before they go into a contract: see installation and after-sales support.

Pair the Basin With the Rest of the Wet Area

Budgeting a basin in isolation misses the items that decide how the room feels. Wall-hung ceramics read best against clean, matched hardware:

A Simple Three-Band Budget Structure

Buyers who keep multi-product projects on budget usually carry three bands and let the client or developer choose where to move between them:

  • Base band: one wall-hung basin model, one WC type, shower sets with standard controls, mirror cabinets without integrated lighting. Maximises repetition, minimises variations in rough-in.
  • Mid band: same ceramic family, upgraded tapware and shower controls, floating vanities made to measure for principal rooms.
  • Upgrade band: gold-line ceramics such as the 1050 series basins and WCs, backlit feature walls, decorative wall panels and statement lighting in principal bathrooms and guest powder rooms.

Move whole rooms between bands rather than mixing every item within one room. Mixed bands multiply the number of unique SKUs per container, and that is where freight, storage and installation time quietly rise.

Verify These Figures Before You Lock the Package

Product pages carry indicative dimensions and drainage details. Confirm sizes, trap type, rough-in distances, carrier compatibility and any certification or standard claims against the current technical data sheet for each model before the order is placed — and confirm which items are included in the quoted price versus supplied locally.

Use the checklist below as a sign-off gate between design and purchase order. Every item should have a written answer, not a verbal one.

  • Dimensioned layout for every bathroom, with basin centre lines set out by the same drawing that fixes wall drainage
  • Written confirmation of what ships with each fixture: carrier, waste, fixings, installation accessories
  • Tapware reach and spout height matched to basin depth and countertop edge
  • Container plan by room type, so the first container holds the rooms being fitted first
  • Named contact for snags, spare parts and replacement during the defects period

Send us your bathroom schedules, room counts and target completion sequence, and we will return a package quotation covering ceramics, showers, vanities and matching fixtures — with made-to-measure options where the drawings call for them. Contact SANTERSON (PHILLIP) on the contact page to start a project enquiry.