A model code such as WS-115AⅢ looks precise on a purchase enquiry, which is exactly why it causes trouble. Two suppliers can both quote “WS-115AⅢ”, one with a swim training system and one without, and the buyer discovers the difference only after the container has been loaded. Shortlisting manufacturers for this class of configurable outdoor swim spa is therefore not about finding the lowest price on a shared model number. It is about finding a supplier who documents the shell, the equipment set, the electrical package and the delivery scope in writing — before the order is placed.
Start with the specification sheet, not the brochure
Every serious swim spa manufacturer should be able to send a per-model data sheet. For the Outdoor Swim Spa WS-115AⅢ published by SANTERSON, that sheet lists catalog dimensions of 3880 × 2200 × 1250 mm, one control system, one swim training system, one water pump, one filter pump, 24 jets in total, four LED lights and a total power figure of 8.05 kW. Treat all of those numbers as the starting point for a conversation rather than as final values: equipment options change what is fitted to the shell you actually receive.
The value of that sheet is comparative. The WS-115AⅢ-U variant sits in the same 3880 × 2200 × 1250 mm footprint, yet its published equipment list differs — four water pumps instead of one, 23 jets, a single LED light, no swim training system listed, and a total power figure of 11.85 kW. Same shell size, different behaviour on site: different electrical load, different jet layout, different swimming experience. A manufacturer who cannot explain those differences line by line is a manufacturer you should not shortlist.
Check the equipment list item by item
Shortlisting works when you compare identical lines across suppliers. For this product family, ask each candidate to confirm in writing which of the following is included as standard and which is an option: control system, swim training system, water pump quantity, filter pump, jet count and jet types, LED lighting, ozone or UV sterilisation, heat pump, sand filtration, insulation and steps. The catalogue for this range lists control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation and steps as options, with availability and compatibility varying by model.
- Shell and structure — acrylic shell thickness, cabinet or frame construction, insulation build-up, access panel positions.
- Water system — pump count and rated duty, filter type and filtration rating, jet count and placement, whether a swim training unit is fitted.
- Water treatment — ozone, UV sterilisation or both, and how the dosing cycle is controlled.
- Electrical package — total power for the confirmed configuration, supply voltage and phase, breaker size, control system make.
- Site items — steps, cover, deck or plinth interface, drainage provision.
Send that same list to every candidate. Within a week you will know which suppliers actually build these units and which ones are trading someone else's catalogue.
Compare footprints across the range before fixing on one model
A good manufacturer earns their place on the shortlist by challenging your model choice, not just confirming it. If the site plan allows a longer shell, the same supplier publishes bigger formats with their own equipment sets: WS-125AⅢ at 5500 × 2300 × 1350 mm with a swim training system, 20 jets and three LED lights; WS-130AⅢ at 8000 × 3000 × 1400 mm with seven LED lights and a total power figure of 10.85 kW; and WS-115FⅢ at 5000 × 2200 × 1250 mm with 24 jets. Longer shells change the swimming channel, and they change the load path to the slab or deck below.
Where a standard model will not sit on the plot, ask whether the supplier can build to shape. A customizable shape outdoor spa in square, round, oval or curved formats is a different commercial conversation from a catalogue unit: it needs drawings, sign-off and a longer lead time. A manufacturer offering both options should be able to tell you plainly which route suits your programme.
Score suppliers on delivery scope, not just product
A swim spa is a project, not a parcel. Ask each shortlisted supplier what they handle between production and handover: packaging and container loading, freight by sea, air or rail, customs documentation such as commercial invoices, packing lists and certificates of origin, door-to-door delivery to site, then installation support, snag inspection, warranty terms and spare parts. Suppliers that describe a single continuous workflow — consultation, design and planning, production, logistics, installation, after-sales — are usually easier to coordinate than a chain of separate vendors.
This is where an one-stop furniture and building materials supplier can simplify a villa or resort programme. When the swim spa, the poolside loungers, the terrace pergola, the bathroom ceramics and the wall and ceiling finishes come from one manufacturer, one team coordinates drawings, one packing list covers the shipment, and one party answers for what arrives short.
Red flags that should remove a supplier from the list
- No per-model data sheet — only marketing pages, with dimensions and power quoted verbally.
- Silence on electrical requirements — no confirmed total power, supply type or protection for the configuration you are buying.
- Options described as standard — heat pump, insulation or steps promised without written confirmation of compatibility with your model.
- No named contact for the project — enquiries passed between sales desks with no engineering follow-up.
- Vague after-sales position — no stated warranty scope, spare parts route or response commitment for your region.
A shortlist that holds up in practice
Keep three suppliers on the list. Ask each one for a written quotation against the same confirmed configuration for WS-115AⅢ: shell and insulation build, equipment list with quantities, total power for that configuration, options priced separately, packing and freight terms to your port or site, installation support, warranty scope and spare parts supply. Compare the answers side by side, and read the omissions as carefully as the prices.
Since 2008 SANTERSON has manufactured furniture and building materials in China for villa, hospitality and office projects worldwide, with production, custom/OEM work, logistics and after-sales handled under one roof. If you are specifying WS-115AⅢ or another model from this range, send us the site plan and target configuration and we will confirm dimensions, equipment and electrical requirements in writing before you commit to any order.