On paper, two swim spas can look identical and still behave very differently on site. The Outdoor Swim Spa WS-S12 is one of the longer models in our Swimming Pools and Swim Spas range, and it is usually specified for villas, resort gardens and wellness areas where the water feature has to work all year rather than only in summer. Before a quotation is confirmed, the following project details are the ones that actually change the specification.

1. The available footprint and how the shell is supported
The catalog lists the WS-S12 at 11740 × 2200 × 1470 mm. That length drives three separate decisions on site: whether the unit fits the terrace or garden plot with clearance for access and maintenance; how much of the shell is exposed versus recessed into a deck; and what structural support the surrounding finish will carry once the shell is full of water.
A long, narrow shell also has to reach the building. Confirm the route from the delivery vehicle to the final position — gate widths, turning points, overhead services — before production starts, because the same dimensions that suit a villa terrace may rule out a courtyard with narrow side access.
2. Whether the project needs swim training as a fixed function
The WS-S12 catalog specification lists water jets, LED lighting and ozone. The closely related Outdoor Swim Spa WS-S12-T carries the same 11740 × 2200 × 1470 mm shell and the same jet count, but its listed features add a swim training system. If residents or guests are expected to swim laps against a current, that requirement belongs in the brief from the first enquiry — it changes the equipment list, not the room.
3. The electrical supply available at the position
The catalog shows a total power figure of 7.65 kW for this configuration, with two water pumps and one filter pump. That number is what your electrical contractor designs around: cable size, protection device, dedicated circuit and the location of the control panel all follow from it. Share the supply arrangement available at the site — single or three phase, distance from the distribution board — at specification stage rather than at installation.
4. Year-round use and water temperature
A swim spa used only in warm months has very different running requirements from one intended for daily training or winter hydrotherapy. The catalog options for this range include heat pumps and insulation, and both should be decided with the local climate and the intended season of use in front of you. Heating and insulation choices affect the plant room load as much as the shell itself.
5. Water treatment and the maintenance routine your team can follow
Ozone is listed as a standard feature for this model; UV sterilization and sand filtration appear in the catalog option list. The right combination depends on who maintains the unit. A hotel or club with a facilities team running a set schedule usually needs a more robust filtration and dosing arrangement than a private villa where the owner or a contracted pool service handles it. Specify against the actual maintenance routine, not against an ideal one.
6. How the spa sits within the rest of the outdoor scheme
A swim spa is rarely ordered alone. Decking, screening, outdoor lounge seating, storage for chemicals and towels, and lighting all sit around it, and in a villa or resort project these items normally come from several suppliers unless one party coordinates them. Coordinating the spa with outdoor furniture for villas and resorts at the design stage keeps finishes, levels and lead times aligned instead of reconciling them on site.
Reference catalog specification for WS-S12
| Model | WS-S12 |
| Catalog dimensions | 11740 × 2200 × 1470 mm |
| Control system | 1 set |
| Water pump / filter pump | 2 pcs / 1 pc |
| Jet total | 73 pcs |
| LED lighting | 1 main light; 50 small LED lights |
| Total power (catalog figure) | 7.65 kW |
| Features shown | Water jets, LED lighting, Ozone |
| Catalog options | Control systems, UV sterilization, water pumps, heat pumps, sand filtration, insulation, steps |
Figures above are transcribed from the product catalog entry for this model. The equipment list and electrical arrangement of the configuration you order should be confirmed in writing before production.
What to send with your enquiry
- A plan or sketch of the position, with overall lengths and access route from the street
- Deck or recess detail: fully above ground, partly sunk, or fully recessed
- Intended season of use and target water temperature
- Available supply arrangement and distance to the distribution board
- Who maintains the unit, and how often
- Whether swim training is required, which points to the -T variant
SANTERSON has manufactured furniture and building materials for project clients since 2008, and can place a swim spa within a wider package that also covers turnkey villa furnishing — outdoor sets, interior fixtures, finishes and the logistics that move them. Send the site information above and we will confirm which configuration of the WS-S12 range fits your project.