A curved outdoor sofa set with a marble coffee table looks effortless on a resort terrace or villa pool deck. Getting one approved, delivered and installed without rework is a different matter. The document package you submit for approval is where that risk is either removed or carried forward into production.

For hospitality patio lounges, the submittal is not a formality. Outdoor lounge furniture sits at the intersection of interior design, exterior exposure, procurement and site logistics, so it has to satisfy a designer, an owner's representative, a purchasing manager and a site contractor — often in that order. Below is the package we ask project teams to assemble around our curved outdoor sofa set with marble coffee table, and what each item actually prevents on site.

1. Scope definition: what is in the set, and what is not

The first line of a submittal should state the configuration in plain numbers. Our standard curved lounge grouping covers a three-seater sofa, two single armchairs and one marble-top coffee table. That is the base scope. Everything beyond it — additional armchairs, an ottoman, a second coffee table, a matching dining set for the adjacent zone — needs to be listed separately with its own quantity, so nothing arrives unpriced or unaccounted for at handover.

State the module count and the seating capacity per zone. A hotel terrace that seats forty is not one big sofa; it is several groupings of three-plus-two arranged around separate coffee tables. Listing groupings by zone also lets you vary cushion colour or table finish between zones later without re-approving the whole order.

2. Frame and finish schedule

The structural description should name the frame material, the joint method where relevant, and the protective finish. For this set, the frame carries an anti-rust powder coating, and the rounded arm profile is what gives the silhouette its softness. Specify the exact metal colour you have approved, in writing, with a physical sample reference — not a colour name alone, because two suppliers reading "bronze" will produce two different surfaces.

Where your project sits near the coast, say so in the submittal and ask for the finish specification appropriate to that exposure. A powder-coated frame is a general outdoor specification; a seaside terrace is a particular environment, and the difference should be settled at submittal stage rather than after two shipping containers have landed.

3. Upholstery: fabric grade, colourway and cushion construction

This set is specified with outdoor-grade performance fabric chosen to handle sun and rain. A submittal that says "performance fabric" has not specified anything. The package should carry the fabric grade, the colour code, and a swatch card signed off by the designer before bulk cutting begins.

  • Fabric type and grade — outdoor performance fabric for exterior zones; commercial-grade fabric where pieces sit in a covered loggia or indoor-outdoor transition.
  • Colour code and swatch reference, matched against the interior palette of the adjacent rooms so the terrace does not read as a separate scheme.
  • Cushion construction: foam density and firmness. Both are adjustable to your drawings, and hospitality seating usually needs a firmer core than residential seating because it is used harder and for longer.
  • Removable covers and the cleaning method you intend to use in operations — this changes what fabric you should specify.

4. Marble top: stone type, thickness, edge profile and fixing

The coffee table is where most submittals go thin, because the marble is treated as decoration rather than as a component that has to survive outdoors. The document should record:

  • The stone selected. Marble options are supported for bulk hospitality orders, so name the specific slab and supply the vein-direction expectation if the design depends on it.
  • Slab thickness and edge profile, with a detail drawing of how the top sits on and fixes to the base.
  • Sealing and maintenance instruction for operations teams, written into the handover pack rather than left as verbal advice.
  • A protection plan for transit. Stone tops are the component most often damaged in container freight, and how they are crated is a submittal item, not a packing detail discovered later.
If your design team wants a lower-maintenance surface for a high-traffic commercial terrace, raise it at submittal stage. We produce outdoor tables in sintered stone and teak-look aluminium slat as well as natural marble, and switching is straightforward before tooling — awkward after production.

5. Dimensional drawings and clearance

Include overall dimensions for every module, seat height and depth, and a layout drawing showing the set in its actual location with clearances marked. Curved seating takes more floor area than the rectangular sofa it replaces, and the radius is what people walk around. Mark circulation routes, door swings, planter positions, umbrella or pergola bases, and any pool-edge setback your site team has to observe.

Where a set sits on a finished deck, confirm the bearing detail so the legs do not mark or stain the surface, and check level tolerance across the paving. Dimensions are made to measure on project orders, so if the layout needs a tighter radius to keep a walkway clear, that is a drawing revision — not a site problem.

6. Samples and mock-up before bulk production

The approval sequence we work to on hospitality orders runs: material swatch card for the fabric and metal finish, then stone sample for the tabletop, then a confirmed drawing set, then bulk production. Nothing is cut until the swatch card is approved. For larger lounge packages, request a single-module mock-up so the client can sit in the curve before committing to six groupings.

7. Packaging, freight and site access

A submittal that stops at the product is incomplete for an imported order. Add a packing list showing crate dimensions and weights per module, the container loading plan, and the delivery terms agreed for the project. Freight is arranged by sea, air or rail with customs paperwork handled on our side, but the site side still needs its own line in the document: floor load on the terrace, lift or crane access, protection of finished surfaces on the route from the loading bay, and a storage area for crates until installation.

8. Installation and handover

State who assembles on site, what the sequence is, and what inspection follows. Our service covers on-site installation with an inspection pass at the end, and after-sales support including spare parts and replacement. What belongs in your submittal is the practical version of that: assembly steps, cushion fitting, stone-top placement last, plus a snag list template and the care instructions for both fabric and marble.

Submittal checklist at a glance

  • Configuration and quantities by zone, with module count and seating capacity
  • Frame material, protective finish and approved metal colour with sample reference
  • Fabric grade, colour code, signed swatch card, foam density and firmness
  • Stone type, thickness, edge profile, fixing detail and crating method
  • Dimensional drawings plus layout plan with clearances and level tolerance
  • Exposure declaration for coastal or high-salt locations, with matching finish specification
  • Packing list, crate sizes, container plan and agreed delivery terms
  • Installation sequence, snag list, care and maintenance instructions
  • Named approver for each item, and the date each sign-off was given

Frequently asked questions

Can the set be resized to fit a smaller terrace?

Yes. Upholstery, metal colour and dimensions are all available as custom options on project orders, so the curve radius and module count can be adjusted rather than accepted as fixed.

Is the marble top suitable for full weather exposure?

The set is specified with a marble-top coffee table and outdoor-grade performance fabric on the seating. For terraces that are fully exposed, confirm the stone choice and sealing regime at submittal stage, or specify one of our low-maintenance tabletop alternatives instead.

Can we order matching pieces for other zones in the same project?

Yes. The same curved language carries across a marble top outdoor dining set with bouclé dining chairs, and the lounge grouping itself extends into a bouclé fabric outdoor sectional sofa set with marble coffee table for zones that need deeper, more informal seating. That keeps one material palette across terrace, pool deck and garden dining.

Who handles the paperwork for import?

Commercial invoices, packing lists and certificates of origin are prepared as part of the shipment. Import terms, duties and delivery scope are confirmed per project, so record the agreed arrangement in the submittal rather than assuming it.

Send us your drawings

SANTERSON is a China-based furniture and building materials manufacturer working on villa, hospitality and office projects end to end — design coordination, custom and OEM production, door-to-door delivery, installation and after-sales support. As an original manufacturer we build loose furniture to your interior drawings, so a curved lounge set can be produced to your dimensions, fabric and stone rather than selected from a catalogue.

Contact PHILLIP by phone or WhatsApp on +86-13928214007, or email santerson@qq.com, and send the layout drawing plus your target zone quantities. We will return a specification sheet, material options and a quotation detail for approval.