A wall-mounted bar unit looks simple on a drawing and complicated on site. The cabinet has to carry bottles and glassware, sit flush against a finished wall, match the joinery around it, and still arrive in one piece with the rest of the fit-out. That is exactly why a buying checklist matters before you place an order.
This article walks through the checklist we would apply to Santerson Wall Mounted Bar Units in a villa, apartment or hospitality project — the decisions you need to settle yourself, and the information you should ask your supplier to confirm in writing.
1. The brief: what the unit is actually for
Before any measurement, write down how the bar will be used. A unit behind a living room that only stores a few bottles and glasses needs very different internals from a service point in a hotel lounge or a villa entertainment floor that has to handle glassware, decanters, ice buckets and a small prep surface.
- Storage type: bottles, decanters and glassware, arranged on open shelves or behind doors as your brief requires.
- Display or concealment: glass fronts show the collection; solid fronts keep the space quiet.
- Prep space: whether a work surface, tray pull-out or appliance recess belongs in the run.
- Who uses it: guests helping themselves, or staff working through a service period.
Write these answers down as one paragraph and send them with your enquiry. They change the layout long before they change the price.
2. Wall construction and fixing method
A wall-mounted unit only works if the wall behind it can take the load once it is loaded. Put three questions to the site team and record the answers:
- What is the substrate — masonry, framed studwork with lining, timber battening, or an existing panelling system?
- Where can blocking or a bearer frame be installed while the wall is still open, and does it need to align with the cabinet hanging points?
- What fixing detail does the supplier intend to use, and has that detail been agreed with the main contractor rather than decided on delivery day?
This is the item most often left too late. Wall-mounted cabinetry should be designed at the same time as the wall build-up, not after it is finished.
3. Made-to-measure dimensions and clearances
The Bar Cabinets collection at SANTERSON is configured rather than picked off a shelf: sizing is made to measure, and layout, material and finish are specified per project. That flexibility only pays off if the numbers you supply are the right ones.
- Overall height, width and depth as built on site, not as drawn at tender stage — measured after floor and wall finishes are in.
- Sill lines, switches, outlets, air grilles, curtain rails and lighting tracks that the unit must avoid or run beneath.
- Projection into the room relative to circulation, seating and any adjacent island or dining table.
- Where the unit meets neighbouring joinery, so returns and shadow gaps are consistent.
- Whether the unit stops short of a ceiling or returns into one, which changes both the carcass height and the setting-out line.
Ask for a dimensioned elevation back from the supplier before production starts, and check it against the site drawings yourself.
4. Layout and internal configuration
The wall-mounted format is one of several in the same collection, and it is worth confirming that it is the right one for this room. Compact bar cabinets suit a short run where storage is limited; Tall Bar Cabinets work when the bar can run to the ceiling; and Santerson Integrated Bar Systems suit a bar that forms part of a larger wall. A wall-mounted unit sits best where you want storage and display without occupying floor area.
Then set the internals: shelf positions, adjustable versus fixed shelving, closed compartments, open niches, and any rail or tray you expect to use regularly. Specify what goes in each compartment rather than leaving it generic.
5. Materials, finishes and how they match the rest of the joinery
A bar unit reads as part of a wall, so its finish has to match or deliberately contrast with the cabinetry beside it. In a project where kitchen, media wall and sideboard are being ordered together, the bar should be specified from the same material schedule.
- Front style: flat panel, handleless, framed or glass-fronted — Santerson Glass Front Bar Cabinets show the same glass-front approach applied to bar storage.
- Colour and texture against physical samples, not screen images, checked under the room's actual lighting.
- Edge and profile detail on open shelves and reveals, where workmanship is most visible.
- Surfaces used in the same build — worktops and splash areas can be coordinated with Santerson Stone & Marble Surfaces, which are also made to measure.
Where a bespoke finish, texture or matching veneer is needed, the Custom & OEM service covers custom furniture design and prototyping alongside material and finish selection. Ask which options are available for your specification and confirm them on a sample before release.
6. Lighting and services
Most bar units fail on lighting rather than joinery. Decide early whether the interior of the unit is lit, whether glass shelves need edge lighting, and where the transformer and switching sit — all of it needs a route to power and an access point for maintenance.
Integrated options are available in the same catalogue, including Santerson Integrated Cabinet Lighting. Electrical specification and compatibility should be confirmed against the cabinet design for your project, with the electrician's drawings cross-checked against the cabinet elevation.
7. Packaging, delivery and site handling
Wall-mounted units are unforgiving of transit damage, because a chipped corner is visible on a finished wall. For an overseas order, the checklist should include how the unit is packed, how it is loaded in the container, where it sits relative to heavier items, and what documentation accompanies the shipment. SANTERSON's logistics service covers freight forwarding, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery.
Confirm the import terms, insurance and delivery point for your project in writing, and plan an inspection of cartons at the delivery point before they move into the building.
8. Installation sequence and handover
Fix the sequence on paper: wall substrate complete, services first-fixed and tested, finishes complete, then cabinetry installed, then lighting commissioning, then snag list. The service scope includes installation and after-sales support — on-site installation, inspection and snags, spare parts and maintenance — so agree in advance who installs the unit and who signs off the snag list.
At handover, check door alignment, fixing security under load, shelf stability, lighting operation and finish condition against the approved sample. Record anything outstanding rather than accepting it verbally.
9. Documentation to keep with the order
A complete file makes a warranty claim or a later extension straightforward. Keep: the approved dimensioned elevation, the material and finish schedule with sample references, the electrical layout for any integrated lighting, the packing list, and the signed snag report.
The short version
A complete checklist for Santerson Wall Mounted Bar Units covers the use case, the wall and its fixings, verified site dimensions, internal layout, finish matching, lighting and services, packaging and delivery terms, installation sequence and handover documentation. Because the units are configured per project — made-to-measure sizing with material, finish and layout options — the specification you send determines the result. Confirm dimensions and selected specifications for your project before production is released.
If you are specifying a bar unit alongside other built-in furniture for a villa, apartment or hospitality project, Built-in Furniture and the Turnkey Interior Project Solutions service show how cabinetry, finishes and fit-out items are coordinated in one order.
Send your drawings, room dimensions and intended use to SANTERSON and request a dimensioned elevation with the material and finish schedule for review before you commit to production.