A wall hung bidet rarely appears on the first draft of a bathroom bill of quantities. It is added late — sometimes after the wall framing, drainage layout and tile order are already fixed — and that is exactly when ordering problems start. Before you place a purchase order for the Wall Hung Bidet 1004F, a modern ceramic wall mount bidet for residential and hotel bathrooms, it is worth working through the questions below with your supplier. Each one decides something concrete: what sits inside the wall, what sits on the finished floor, and whether the fixture arrives as part of a coordinated set or as a late substitution.

1. What are the exact dimensions, and do they fit the layout?

The 1004F is listed at 545×360×410 mm with a rounded rectangular outline. Those three numbers drive the clear space you need on the wall, the distance to the adjacent WC and basin, and whether the bowl projects into a walkway in a compact guest bathroom. Ask your supplier for a dimensioned drawing rather than a brochure photo, then set out the position on site with the finished floor level marked. A few centimetres of error is invisible on paper and very visible once the wall is closed up.

2. Which drainage arrangement does the job actually use?

A wall mounted bidet depends entirely on what is behind the finished surface: concealed cistern and frame system, waste connection, water supply points and access for future servicing. Confirm with your plumbing consultant that the chosen frame supports a bidet at the planned height, and confirm the trap and rough-in dimensions against the supplier's final technical sheet before any pipework is fixed in place. The published product page carries a standing note that dimensions and trap or rough-in details must be verified against the final technical sheet — treat that as part of the ordering process, not an afterthought.

3. How is the unit fixed, and what does the wall need to carry?

The 1004F is fixed through a back panel, which produces the floating look and leaves the floor beneath it clear. That fixing method assumes a supporting structure designed for a wall hung fixture. Ask what fixing components are supplied with the bidet and what has to be provided locally. On renovation work where an existing partition cannot take a concealed frame, discuss alternatives early — the catalogue also lists a Floor Standing Bidet 1038F with back-to-wall support for projects where a wall hung installation is not practical.

4. Does it match the rest of the sanitary set?

Specifying one fixture in isolation almost always produces a mismatched result: different bowl radii, different glaze sheen, different seat fixings. The 1004F is designed to sit alongside matching wall hung water closets and wash basins so the room reads as one collection. If your project already has WCs and basins selected, send the model references to the supplier and ask which bidet completes that family. For new builds it is usually cheaper and cleaner to order the whole bathroom sanitary set together — ceramics, vanities and shower fittings from one production run, on one delivery schedule.

5. What is the ceramic and glaze specification?

Ask what body material and what glaze finish are being supplied, in writing. The 1004F is made from vitreous ceramic with a smooth glossy glaze intended to resist staining and mineral deposits, which matters in areas with hard water supply, where a poor surface loses its sheen well inside the life of the fit-out. For a hotel or serviced apartment the same question becomes a maintenance question: what does housekeeping need to clean it with, and does the surface tolerate routine cleaning chemicals.

6. Who coordinates production, packing and delivery?

Ceramics break, and they break most often in transit or in storage on site. Clarify how the units are packed for export, whether spares are included for a project order, and how the bidets are sequenced with the rest of the bathroom package — basins, toilets, shower systems, vanities and lighting. SANTERSON works as a one-stop furniture and building materials supplier covering design, custom/OEM production, door-to-door logistics, installation support and after-sales support, so a single procurement line can cover the whole fit-out instead of a dozen separate suppliers each shipping on their own timeline.

7. What happens if a unit is damaged or a quantity changes?

Site quantities move. Ask before ordering how replacements are handled, what the lead time is for a small top-up batch in the same glaze and model, and who covers replacement of units damaged in transit. Getting these answers in writing before the order protects you far more than any product photograph.

Order with the questions already answered

The Wall Hung Bidet 1004F suits European-style bathrooms, villas and boutique hotel restrooms where a clean wall hung line and an unobstructed floor are part of the design intent. It is a straightforward fixture to specify — as long as dimensions, drainage route, fixing method, set compatibility and after-sales terms are settled before the order goes into production rather than after the wall is closed. Send your drawings and model references to our team and we will confirm which bidet and matching sanitary ware complete your bathroom package.