A set of flush sliding doors looks simple on a drawing: a full-height panel, no visible frame, a leaf that disappears into the wall. That simplicity is exactly why the manufacturing partner matters. Small errors in track alignment, panel flatness or opening dimensions do not show up as minor flaws — they show up as a door that rubs, jams or sits proud of the finished wall line for years.

If you are sourcing these doors from China for a villa, apartment or hospitality project, the shortlist is usually decided in the first round of correspondence. The questions below are the ones that separate a workshop that can hold tolerances from one that cannot.

Start With What "Flush" Actually Requires on Site

A flush sliding door is a coordination item, not a standalone purchase. The leaf, the pocket or the wall finish, and the opening lining all have to be resolved together before anything goes into production. Before you compare prices, confirm that a supplier will work from your opening sizes and finish build-up rather than offering fixed catalogue dimensions.

  • Who measures the openings — your team with a template, or the supplier's own survey? If the doors are being installed on site, a supplier who arranges measurement and installation support removes one of the most common sources of rework.
  • What is the wall build-up at the pocket — stud depth, lining thickness, finished face level. Sliding leaves need a clear pocket depth and a straight running line; a supplier who asks for this detail is reading your drawings properly.
  • Which hardware system carries the leaf, and where is it sourced. Track, hangers and floor guides determine how the door feels after two years of use more than the panel does.
  • How the wall finish meets the door — plaster, panelling or veneer return, and whether the same supplier is producing adjacent sliding panels that must match in grain and colour.

Six Checks to Run on Every Manufacturer

CheckWhat a capable supplier sends back
Made-to-measure capabilityAcknowledgement that dimensions, layout and finish are specified per project, with a shop drawing returned for your approval before production starts.
Finish and material rangeNamed options for substrate, veneer or laminate, lacquer or paint system, and handleless or recessed pull details — not one stock colour offered as "standard".
Door-family depthA supplier who also produces flush hinged doors, pocket doors and concealed doors understands the same wall detail from several angles, which helps when one opening type changes on site.
Project references in your marketCase work you can actually inspect. SANTERSON's published project list includes villa and housing work in Sydney, Melbourne, Perth, Willoughby and North Turramurra — useful as a starting point for reference checks, not as a substitute for them.
Custom and OEM termsWhether bespoke finishes, prototyping and private labelling are offered, and at what order quantity. Ask early; MOQ surprises kill schedules later. Details are on the custom & OEM service page.
Logistics ownershipFreight mode, packaging and container loading, customs paperwork and delivery to the site or port of your choice. See logistics and door-to-door delivery for what is offered, then confirm terms, duties and transit for your specific consignment.

Read the Shop Drawing, Not Just the Quotation

The single most useful document in this process is the production drawing issued after the order is placed. A shortlist winner produces one without being chased, and it shows the opening size, the leaf size and its overlap, the pocket depth, the track position relative to the finished floor level, the hardware set, and the edge detail where the door meets the wall. Every disagreement you settle on that drawing costs nothing; the same disagreement settled after the panels are pressed costs a re-run and a site delay.

For multi-unit work, ask for one opening to be produced and shipped as a proof before the balance is released. It is slower on paper and considerably faster in practice.

What to Ask for in Writing Before You Commit

  • Confirmed dimensions and finish schedule per opening, referenced to your drawing revision number.
  • The hardware make and model, plus what spare hangers and guides will ship with the order.
  • Packaging specification and loading plan — flush leaves are large, flat and brittle at the edges, and most transit damage is handling damage.
  • Who attends to site setting-out, and how snags are recorded and closed out at handover.
  • What after-sales support covers, what it excludes, and how replacement panels are matched if one leaf has to be re-made later.
A practical note on scope: because doors, wall panelling, joinery and flooring usually come off the same set of drawings, sourcing them through one one-stop solution supplier means one shop-drawing review instead of four, and one party responsible when the door line and the panel line fail to meet. That coordination benefit is often worth more than the difference in unit price.

A Shortlist Scorecard You Can Send Today

Score each supplier out of five on: made-to-measure responsiveness, shop-drawing quality, hardware transparency, packaging and freight clarity, and after-sales terms. Ask the same six questions in your first email and compare the answers rather than the prices. Suppliers who answer with specifics — pocket depth they need from you, a drawing turnaround time, a named hardware set — are the ones worth a second conversation.

SANTERSON has been manufacturing furniture and building materials since 2008 and produces flush sliding doors to project-specific dimensions, layouts and finishes. Send us your door schedule and wall sections and we will return shop drawings, a hardware proposal and an itemised quotation for review.

Contact PHILLIP — Phone / WhatsApp +86-13928214007 · Email santerson@qq.com · Enquiries: santerson.com/contact