A set of made-to-measure neutral tone lacquer wardrobes rarely travels alone. It arrives as part of a villa or apartment fit-out that also includes cabinetry, wall panelling, flooring and lighting, and the joinery usually sits at the back of the production queue because it depends on final room dimensions. That is why international delivery planning for this product line starts months before any container is booked: the wardrobes have to be manufactured, protected, documented and sequenced so they can be installed once the wet trades and flooring on site are finished.

What makes built-in lacquer wardrobes different from loose furniture

Loose furniture can be swapped or re-ordered. A wardrobe carcass built to a specific opening cannot. The Neutral Tone Lacquer Wardrobes in our Lacquer Wardrobes collection are supplied with made-to-measure sizing, material and finish options, and a layout tailored to each project — which means the order is fixed against drawings rather than a catalogue size. Two consequences follow for logistics:

  • Dimensions must be confirmed before production begins. Site openings should be measured after floor and ceiling finishes are in place, and the signed dimension sheet should be the same document the factory and the site team both work from.
  • Finish selection is a delivery decision, not only a design one. Lacquered door faces are the most exposed surface in the whole shipment. The sheen you choose affects how panels are packed, how they are loaded, and which units should be opened first on site.

If your scheme mixes finishes from room to room, keep the family consistent on one purchase order: matte lacquer wardrobes, high gloss lacquer wardrobes and two tone lacquer wardrobes are built to the same project-specific approach, so one procurement package can cover bedrooms with different requirements.

Step 1: lock the drawings and the finish schedule

Before any freight discussion, close out three documents. First, dimensioned elevations for every wardrobe run, including skirting, cornice, architrave and any recess the carcass has to clear. Second, a finish schedule naming each lacquer colour and sheen per room, because neutral tones read differently under warm and cool lighting, and checking a sample under the actual project lighting avoids an expensive dispute later. Third, an interior layout for hanging zones, drawers and shelving, since internal fittings change panel sizes and the weight distribution inside each package.

Our interior design services cover this stage — space planning, drawings, production coordination and on-site guidance — so a buyer without joinery drawings can start from a room layout instead. The cooperation sequence is straightforward: project brief and design proposal, then quotation and detail confirmation, then production, shipment and follow-up.

Step 2: confirm the order against your own numbers

Once drawings are issued, ask for a unit-by-unit breakdown rather than a lump-sum package price. A usable purchase order lists each wardrobe by room code, opening width and height, door type, finish reference, internal configuration and package count. This is the document your customs broker, your site foreman and your factory will all refer to when a crate arrives on the wrong floor.

At this point it is worth deciding how much of the fit-out travels together. Wardrobes, kitchen cabinets, wall panels and engineered wood flooring from one supplier can be consolidated into fewer containers, with one packing list and one delivery window. Consolidation cuts freight handling and reduces the number of suppliers chasing each other on site.

Step 3: choose a shipping mode around the joinery, not the small parcels

Built-in wardrobes are bulky, and one face of every panel is fragile, so sea freight is the normal choice for a full project order. Air freight only makes sense for replacement doors or hardware if a site date has already slipped. Our logistics and door-to-door delivery service arranges forwarding by sea, air and rail, handles the shipping paperwork, and organises packaging and container loading through to delivery at the project address.

Whether you compare our freight arrangement with your own forwarder or with a third one, base the decision on landed cost and arrival date rather than freight rate alone. Ask each party for:

  • total package count, dimensions and gross weight, so you can price a full container against a shared container;
  • the port of discharge, and whether delivery continues to the site gate or stops at a depot;
  • which party prepares commercial invoices, packing lists and certificates of origin;
  • whether cargo insurance is included in the quoted price or added separately.

Import duty, taxes and clearance requirements are set by the destination country, so confirm them with your broker for each project instead of assuming that a previous shipment applies to the next one.

Step 4: pack and label for the installation sequence

Lacquered panels should travel flat or upright in rigid, edge-protected packaging, with door faces separated from carcass boards and hardware boxed separately. Corner guards and a moisture barrier matter more on a long sea leg than outer-box thickness.

Labelling is where most project shipments succeed or fail. Every package should carry the room code, the unit code, the sequence number within that unit, and the package number out of the total — for example BED01-WD2, package 3 of 6. A foreman who can find the correct doors without opening six crates saves days, not hours.

Step 5: schedule arrival against site readiness

Wardrobes cannot be installed before the room is finished: flooring, skirting, plaster and first-fix electrical all have to be complete, and the site must be dry and secure. Work backwards from your installation date — allow clearance and transport time, then a holding period on site for inspection — and set production completion accordingly. Shipping early is not an advantage if there is no safe place to store flat-pack joinery.

Inspect every package against the packing list on the delivery day, photograph any damage to the packaging before signing, and report panel or door damage immediately with the package label visible. Our installation and after-sales support covers on-site installation, inspection and snags, plus spare parts and replacement when a panel is damaged in transit.

A practical checklist for your enquiry

Item to confirmWhy it affects delivery
Final measured openings, taken after finishesPrevents remake costs that restart the production and shipping cycle
Lacquer colour and sheen for each roomFixes the order; a change after cutting delays shipment
Internal layout per unitDetermines panel sizes, package count and weight
Room-coded labelling planLets the site team install in sequence without opening every crate
Delivery address and accessContainer vehicle access, lift size and storage space decide the unloading method
Who clears customs and who pays dutyAvoids demurrage charges while responsibility is being settled

If you are coordinating several trades for one build, turnkey interior project solutions let furniture and building materials move under one programme, with production, logistics, installation and after-sales handled by the same team. Send us your drawings, room list and target site date, and we will return a quotation, a package schedule and a shipping plan for the wardrobe order as part of the wider fit-out.