Freestanding cabinets look like the easiest item on a fit-out schedule to specify. No wall opening to coordinate, no joinery rebate to set out, no recess to chase. A buyer sends a size and a finish, and a unit arrives. That is exactly why specification errors go unnoticed until the units land on site — wrong height for the ceiling line, wrong internal layout for the goods being stored, wrong board for a humid room.

This guide sets out the seven things to compare when sourcing SANTERSON freestanding cabinets for villa, hotel or apartment projects, and the questions that turn a catalogue line into a buildable specification.

1. Confirm which collection you are actually comparing

"Freestanding cabinet" is not one product at SANTERSON. It describes how a unit stands, and the same mounting type appears across several collections, each built for a different room and duty. Comparing two projects that used different collections is the fastest way to end up with an apples-to-oranges quotation.

Catalogue entryCollection on siteTypical setting
Santerson Freestanding CabinetsStorage Units, under Sanitary Fixtures / BathroomsBathroom and powder-room storage
Santerson Freestanding CabinetDisplay Cabinets, under Built-in furnitureLiving areas, display and storage
Santerson Freestanding TV CabinetsTV Cabinets / Media Units, under Built-in furnitureLiving rooms, guest-room media walls
Santerson Freestanding Open ShelvesOpen Shelving, under Sanitary Fixtures / BathroomsOpen bathroom shelving and display
Freestanding Open WardrobesOpen Wardrobes, under Built-in furnitureBedrooms, dressing areas, walk-in layouts

The practical point: the same finish name and the same height can carry different internal structures and different hardware across these lines. Ask which collection a quotation line belongs to before you compare its price with another project's.

2. Made-to-measure sizing is standard — check what it covers

Every freestanding entry above lists made-to-measure sizing, material and finish options, and a layout tailored to the project as part of its configuration. That means the unit is built around your space rather than you designing around a fixed module.

What buyers should pin down in writing before production starts:

  • Overall envelope — width, height and depth, plus whether the stated depth includes doors, handles and any plinth or shadow gap.
  • Ceiling condition — for tall units in villas and hotel rooms, confirm whether the cabinet stops at the ceiling or leaves a gap, and who fills that gap if it is closed.
  • Floor condition — freestanding units sit on the finished floor. State the floor build-up thickness at the location, because a difference of only a few millimetres between drawing and site changes whether the unit clears a door swing or a threshold.
  • Clearance to adjacent work — vanities, toilets, wardrobes and doors are usually specified by different trades. Freestanding cabinets sit in the same room as all of them.

3. Match the internal layout to what will actually be stored

A cabinet that photographs well can still fail in use if the internals were never designed. The Storage Units collection lists several related configurations, and they are worth requesting side by side rather than defaulting to one shelf plan:

Send the merchandising or housekeeping list, not just a room elevation. A guest-room cabinet sized from an elevation alone often turns out too shallow for the laundry baskets and too deep for the amenities tray.

4. Board, finish and edge detail — ask per room, not per project

SANTERSON's cabinetry range covers a wide spread of door materials and surface finishes: acrylic, lacquer, melamine, PVC, wood veneer, aluminium-frame and glass-front constructions. Each freestanding configuration also lists material and finish options, so the same breadth carries across.

Two things to compare rather than accept:

  • Finish continuity with built-in work. If a project also specifies kitchen cabinets or wardrobes from the same factory, ask for the freestanding unit in the identical board and finish batch. Veneer figure and lacquer sheen are where a "matching" specification visibly fails.
  • Room exposure. A bathroom storage unit and a living-room display cabinet do not face the same conditions. For wet rooms, ask specifically about the board construction, edge sealing and the hardware finish in that environment before approving a sample.

Glass-front variants exist too — freestanding display cabinets, alongside curio cabinets and illuminated display cabinets in the same collection. Where glazing is specified, treat glass type, thickness and edge treatment as a named line item on the quotation, because the product listing requires the glass specification to be confirmed for each project.

5. Lighting, hardware and electrical: separate line items

Several Santerson collections can carry integrated lighting — integrated cabinet lighting, shelving accessories, and media units with LED detailing. For a freestanding unit this matters more than buyers expect: the unit is not fixed into a wall chase, so the driver location, cable route and any switch or sensor need to be resolved before the carcass is built.

  • Confirm electrical specification and compatibility for each cabinet design, as the product listings require.
  • Agree who supplies power to the unit — electrician or joinery package — and where the isolation sits.
  • Ask whether hinges, runners and handles are named in the quotation or priced "as selected at production". Unnamed hardware is where project budgets leak.

6. Anchoring, safety and site handling

Freestanding means unsupported by the wall, not unsecured. For tall units in hospitality and multifamily projects, ask the factory to state fixing requirements for the selected height and depth, and confirm what the local installer provides on site. Installation requirements are listed as items to verify per configuration, so they belong in the pre-production confirmation rather than arriving later as a site variation.

Also settle transport and unpacking early. Freestanding carcasses are bulky to ship, and glass-front or illuminated variants need more careful handling than a plain door. Packaging and container loading sit inside the logistics and door-to-door delivery scope, but you should still confirm pallet configuration and delivery access at the building.

7. Compare the procurement route, not only the unit price

Freestanding cabinets are rarely bought alone on a Santerson project. They usually sit inside a wider package of built-in furniture, vanities, wardrobes and sanitary fixtures from the same supplier. That changes what you should compare between quotations:

  • Whether design coordination, drawings and production follow-up are included — see interior design services.
  • Whether the unit can be produced as a bespoke item under custom and OEM service, including material, finish and branding options.
  • How the cabinets ship alongside the rest of the fit-out — see the one-stop solution scope covering design consultation, specification, manufacturing, project management and handover.
  • What happens after delivery: installation, inspection and snags, spares and maintenance under installation and after-sales support.

Australian buyers in particular should confirm import terms, duties, Incoterms, insurance, transit time and delivery scope case by case for each project. Published service descriptions are not a guaranteed service level, and freight arrangements change between shipments.

A pre-production checklist

1. Which collection is the unit from — Storage Units, Display Cabinets, TV Cabinets / Media Units, Open Shelving or Open Wardrobes?

2. Are width, height and depth stated with doors, handles and plinth included, against the finished floor level?

3. Is the internal layout based on a stored-items list rather than an elevation drawing?

4. Is the board, finish and edge detail named for the specific room exposure, with a sample approved?

5. Are glass type, hardware make and lighting specification priced as named line items?

6. Are fixing and anchoring requirements stated for the selected size, and who carries them on site?

7. Is packaging, delivery access and installation responsibility written into the same document?

Dimensions, materials, hardware, glass and electrical details vary by configuration and must be confirmed against the current technical data for each project before production.

SANTERSON is a China-based furniture and building materials manufacturer, supplying villa, hospitality and office projects with custom cabinetry, sanitary fixtures, lighting and interior finishes, supported by design coordination, production and door-to-door logistics. For a quotation on freestanding cabinets for your project, contact the SANTERSON team through the contact page.