A Santerson Double Basin Countertop is specified, manufactured and shipped long before anyone turns a tap on. Because the unit is made to project-specific dimensions, layout and finish, the practical risk sits in what happens after delivery: fit on site, plumbing interface, sealant joints, spare parts and who answers when something does not line up. This article lists the questions procurement teams, contractors and homeowners should put in writing before the order is placed, and explains why each one matters for a double-basin vanity top.

Why after-sales detail matters more for a made-to-order countertop

A stocked bathroom product fails in predictable ways: a drawer runner breaks, a hinge bends, and the replacement part comes from the same catalogue line. A fabricated double basin countertop is different. The countertop length, the distance between the two basins, the position of the tap and waste holes, the cut-out for the backsplash and the edge profile are all fixed at the factory to match one set of drawings. If a measurement on site is wrong, or if the on-site plumbing is moved after the top has been produced, there is no shelf part that solves it.

That is exactly why the product page asks buyers to confirm basin spacing and countertop material for each project before production. The after-sales conversation should start from the same place: what is covered if the discrepancy is found after the crate arrives, and how quickly a corrected panel can be made and shipped.

Question 1: Which drawing is the reference document?

Ask for one controlled drawing that both sides sign off: overall length and depth, thickness of the top, basin centre-to-centre spacing, distance from each basin centre to the rear and side walls, tap hole positions, waste outlet diameters, overflow provision, backsplash height, and the edge and splash details. Every after-sales claim later depends on this document.

In practice we ask buyers to send their bathroom layout, or to let us prepare one from site measurement, and then confirm the drawing in writing before cutting. If your tiler, plumber or cabinet maker changes anything afterwards — shifting a waste pipe by a few centimetres, for instance — that change must come back to us as a revision request before production starts, not after.

Question 2: What happens if site dimensions differ from the drawing?

Get the process in writing, not a verbal reassurance. Specifically ask:

  • Who re-checks dimensions before production — our team from your drawings, or your contractor on site against our shop drawing?
  • What the cut-off point is for accepting a dimension change after production has started.
  • What the cost and lead time are for remaking a panel if the error came from our drawing versus from an unreported site change.
  • Whether an on-site trim or scribe is acceptable for small variances, and how much tolerance the material allows.

For a double-basin layout, ask us to keep a clear zone between the two basins so both taps and both wastes have room, and to set tap holes relative to the finished wall face rather than the stud line. Confirm those references with your plumber before sign-off; it removes most of the disputes that would otherwise become after-sales cases.

Question 3: What is covered by warranty, and what is excluded?

Ask for the warranty terms in writing and read the exclusions carefully. The points that decide whether a claim succeeds or fails on a stone vanity top are usually these:

  • Scope: does the warranty cover the slab or engineered surface, the basin fixings, the cut edges, or all of them?
  • Duration and start date: from shipment, from delivery, or from installation sign-off.
  • Exclusions: cracking from unsupported fixing, damage from acidic or abrasive cleaners, staining left untreated, freeze damage in unheated buildings, and modifications made by others.
  • Evidence required: photographs, the signed drawing, the installation record, and sometimes the packaging label and batch reference.

We list warranty coverage alongside inspection and snagging at handover. What we cannot do is guess your requirements — so ask us which cleaners and sealants are approved for the exact surface you selected, and keep that answer with the project file.

Question 4: Which parts can be replaced later?

A countertop rarely fails as one piece; the items that wear are the ones around it. Ask which of these can be reordered separately and whether they must come from the same production run:

  • Matching undermount basins, if the design uses them, plus the fixing kit and cut-out template.
  • A matching top for a second bathroom or a future replacement panel — order a spare drawing and note the material batch reference on your file.
  • Integrated storage below: the Santerson Integrated Countertop Vanity line, including hinges, runners and handles.
  • Surface continuity elsewhere in the same bathroom — skirting, niche shelves and wall cladding from our stone and marble surfaces collection, so a later repair can be matched rather than approximated.

For multi-unit work — apartment bathrooms or a villa with several identical ensuites — ask us to keep one batch reference across all units. Natural veining varies from slab to slab, and matching a repair years later is far easier when the original batch is recorded.

Question 5: How are faults reported, and how fast is the response?

Ask for one named contact and one channel for faults, plus the information they expect in the first message. A useful fault report includes the purchase or project reference, the signed drawing, photographs of the problem from a distance and close up, the measurement that shows the variance, and a description of what has already been done on site.

Our installation and after-sales support service covers on-site installation, inspection and snagging, warranty handling, spare parts and replacement, and ongoing maintenance. Where a fault is genuine — a chip in transit, or a hole drilled to the wrong position against the approved drawing — we arrange repair or replacement rather than leaving your site team to improvise.

Question 6: Who installs it, and does installation affect the warranty?

This is where most stone countertop warranties quietly lapse. Ask:

  • Whether the warranty requires professional installation, and what standard of support, packing and fixing is expected underneath the top.
  • Who supplies and applies the sealant at wall and basin joints — your tiler, our installer, or neither until handover.
  • Whether cutting, drilling or notching on site voids coverage, and what written approval you need first if a tap or waste position must be adjusted.
  • What the handover inspection covers, and how snags are recorded and closed out.

If your project is outside China, ask whether we send installers, supervise remotely, or provide fixing details for a local contractor. Our stated cooperation steps run from the design proposal through quotation and detail confirmation to production, shipment and follow-up, so installation support should be agreed at quotation stage — not discovered as an extra when the crate lands.

Question 7: How is damage in transit handled?

Brittle panels are the classic freight casualty. Ask how the top is packed and crated, whether it is loaded flat or on edge, who insures the shipment, and what you must do on delivery to keep a claim valid. In practice: photograph the crate before opening it, photograph the panel as it is unpacked, and note any damage on the delivery paperwork the same day. Our logistics service covers freight forwarding, customs documentation, packaging and container loading, shipment tracking and door-to-door delivery — but the inspection window belongs to you, so confirm how long you have to report concealed damage.

Question 8: What maintenance support comes with the surface?

Ask for written care instructions specific to the finish you chose — honed versus polished, natural stone versus engineered surface. At minimum you want the approved daily cleaner, what to avoid, how often resealing is needed if the material requires it, and how to treat common stains. For hospitality and rental bathrooms, ask for a short maintenance sheet your housekeeping team can actually follow; that single page prevents more countertop complaints than any warranty clause.

A short pre-order checklist

Item to confirm in writingWhy it protects you after delivery
Signed dimension drawing with basin spacing, tap and waste positionsIt is the reference for every later claim or remake
Change-control cut-off date after production startsPrevents disputes over late site changes
Warranty scope, duration, start date and exclusionsTells you what a claim will actually cover
Reorderable parts and batch referenceMakes future repairs matchable rather than improvised
Fault channel, required evidence and response expectationCuts the time between discovery and resolution
Installation responsibility and handover snag listKeeps the warranty valid and closes defects on the spot
Freight insurance and concealed-damage reporting windowProtects the transit claim
Care and cleaning instructions for the exact finishPrevents avoidable staining and etching complaints

If you are specifying a double-basin vanity top for a villa ensuite, an apartment bathroom or a hotel room, send us your layout and target completion date and we will return the drawing, the quotation and the after-sales terms together — before anything is cut. Browse bathroom sanitary fixtures to see the matching basins, vanities and surfaces, or contact us to start a project enquiry.