A floor order is one of the easier things to get wrong on a villa or hospitality project. The sample looked perfect in the showroom, the drawing showed a herringbone layout, and then the boards arrive in a size nobody specified and a finish that does not match the joinery. If you are sourcing engineered wood flooring from an overseas manufacturer, what you prepare before contacting the supplier largely decides how many revision rounds follow. Here is the shortlist to have ready, and what each item actually changes in the quotation for European oak parquet engineered wood flooring.

1. The area, but not just the area

Suppliers price by square metre, so start there, but send the number with its context. Give us the net floor area of each room separately rather than one total for the whole building, and say whether alcoves, wardrobes and under-soffits are included or excluded. Then add the wastage allowance you want applied. Diagonal and herringbone layouts need a larger allowance than straight-stack parquet, and a long narrow corridor produces more off-cuts than a square room of the same size.

Also send the plan, even a marked-up PDF or a phone photo of the drawing. With the layout we can tell you how many boards land as short end pieces, where the border rows fall, and whether the pattern will read correctly in a room with an open doorway on two walls.

2. Pattern, format and tone, with a reference

"Parquet" covers a lot of ground. Specify the pattern you want: block parquet, herringbone, chevron or a plank format laid in a parquet-style field. Then specify the board width and length, because a 3mm oak wear layer over a multilayer base behaves differently at narrow widths than at wide planks. Our European Oak Parquet Engineered Wood Flooring is a deep brown block parquet with a 3mm solid oak top layer, while the European Oak Herringbone Engineered Wood Flooring is a light bleached tone in the same construction. Same build-up, completely different room.

Tone is where email enquiries go furthest wrong. Screens shift colour, and "natural", "smoked" and "charcoal" are not standardised terms across factories. Send a photograph of the finish you are working to: the floor in an existing project, the veneer sample from your joinery package, or a page from a mood board. State too whether you want a brushed, saw-cut or smooth surface, and matte lacquer, oil or gloss.

3. Construction details for your actual site conditions

Three questions decide the build-up we quote:

  • Is there underfloor heating? Several of our parquet lines are listed as compatible with underfloor heating, but the combination of a hydronic or electric system with a specific board thickness and adhesive needs confirming per product before production.
  • What is the subfloor and how level is it? Concrete slab or timber bearers, plus the measured level tolerance across the room. Engineered boards are dimensionally stable, but they will bridge dips if the prep has not been done.
  • How is the floor being fixed? Fully bonded, secret-nailed or floating. Each method has a different board thickness requirement and adhesive cost.

If the floor goes into a hotel reception, a lobby bar or a villa with heavy footfall, say so. Traffic level informs the wear-layer finish and the maintenance regime you hand over to the operator at practical completion.

4. Quantities, phasing and delivery address

Give us the total square metres plus the number of rooms or floors being floored in each phase, and tell us whether the order ships in one container or is staged across site phases. Staged deliveries change packing, container loading and the production sequence, so it is cheaper to plan that at quotation stage than to split a production run later.

Send the delivery address and your preferred Incoterms: door-to-door, port-to-port or ex-factory. We handle sea, air and rail freight with customs paperwork and door-to-door delivery, so if you tell us the site address and the destination port we can quote both landed and factory-gate pricing for comparison.

5. Your drawing package, not just a product name

Flooring rarely sits alone. Send the sections where it meets other trades: the threshold detail at the entry door, the junction with tile or carpet, the skirting and scotiabead profile, the stair nosings, and the interface with joinery and kitchen cabinetry. Where the floor has to align with built-in units, send those drawings too. We manufacture custom furniture and interior fixtures alongside flooring, so matching a veneer or lacquer between the boards and the cabinetry is something we can handle in one production package rather than leaving two factories to reconcile on site.

6. What the supplier needs from you, and what they should send back

Once you have sent area with wastage, pattern and format, tone reference, site conditions, quantities and phasing, delivery terms and the interface drawings, a supplier can quote properly. What you should expect in return is a specification sheet showing construction and wear-layer thickness, a physical sample or swatch set before any production commitment, a unit price broken down by board format, packing and container-loading details, and a written lead time tied to your site programme.

Ask for the sample. Photographs of European Oak Engineered Parquet Flooring will not tell you how a finish behaves under your lighting, how much grain variation runs through a batch, or how the tone sits against your paint and fabric schedule.

7. Questions worth putting to any flooring supplier

  • Which board formats and patterns are stocked standard, and which require a bespoke production run?
  • What is the minimum order quantity per format, and can we mix formats in one container?
  • How does grain variation get graded, and how are boards distributed across a delivery so the variation spreads evenly?
  • What adhesive and installation method do you recommend for our subfloor and heating arrangement?
  • What is covered if boards arrive off-specification, and how are spares handled after handover?

A short brief template you can copy

Project name and location; net floor area per room with the plan attached; wastage allowance you expect; pattern and board format; tone and finish reference image; underfloor heating yes or no and which system; subfloor type and measured level tolerance; fixing method; total square metres and phasing; delivery address and Incoterms; required on-site date; interface drawings for thresholds, skirting, stairs and joinery.

Send that in your first message to a supplier and you are usually one sample away from a firm order rather than several rounds of clarifying emails. If you want us to price a parquet package against the rest of your interior fixtures, such as cabinetry, wall panelling, doors and lighting, contact our project team with the drawing set and we will tell you which parts can be consolidated into one production and delivery programme.