Wall surfaces in a hotel carry more abuse than almost any other finish: luggage scuffs in the corridors, cleaning trolleys, guest hands, humidity from housekeeping steam, and lighting that reveals every imperfect joint. A luxury decorative 3D wall panel solves two problems at once when it is specified properly — it hides the flatness of a poor substrate with its relief, and it gives the space a signature texture that paint cannot repeat. It fails just as quickly when it is bought as a catalogue item with no project thinking behind it.

This guide walks through how buyers, procurement managers and main contractors specify decorative 3D wall panels for hospitality projects: what to decide before you request a quotation, how to group the order with related finishes, and which commercial terms to lock down before production starts. Everything below reflects the products and services SANTERSON publishes on its own site; performance figures, certifications and lead times should always be confirmed for your specific project.

1. Start from the guest journey, not from a sample board

The most common procurement mistake is choosing one feature wall and then discovering that three other areas need the same panel in different formats. Before you request pricing, map the panel against the areas it will actually serve:

  • Arrival and lobby. Feature walls behind reception desks, seating niches and stair voids. Relief here reads as luxury because guests view it at a distance and under directional light.
  • Guest room floors and corridors. Headboard walls, lift lobbies and the long runs where impact damage is constant. Corridor use changes what you ask for on durability and cleanability.
  • Food and beverage. Restaurants and bars, where steam, grease and cleaning frequency are the deciding factors rather than appearance alone.
  • Meetings, spa and back of house. Acoustic comfort and moisture exposure enter the specification here, and not every decorative panel is intended for these conditions.

That map becomes your schedule of areas. Send it with your enquiry — a supplier who sees the areas can advise where to change product rather than force one panel everywhere.

2. Decide what you are actually buying

The published description for this product covers eco-friendly material that is lightweight, easy to cut and install, with moisture resistance and impact resistance, and custom size, colour and pattern available. Applications named on the site include hotel lobbies, restaurants, offices, villas and living rooms. Treat those as the starting specification and confirm each item in writing for your project.

DecisionWhat to specify in the enquiry
Panel formatModular tile, rigid sheet or roll — this determines how joints fall and how much cutting waste your site generates.
Relief depth and pattern scaleState the viewing distance for each area. A pattern that looks refined in a 3 m lobby can look busy across a 12 m ballroom front.
Finish and colourAsk for physical samples under your own lighting, plus the paint or coating system compatible with the surface if you intend to recolour.
Substrate and fixing methodConfirm the wall build-up, adhesive or batten system, and how skirting, cornices and reveals are closed off.
Wet and acoustic zonesDo not assume a decorative panel suits a spa or a loud meeting room. Where moisture control or sound absorption matters, ask for the product family designed for it.
Fire and code requirementsHospitality projects usually have a testing requirement from the local authority. Ask what test documentation exists for the exact panel you are buying, in the destination country.

3. Compare the panel families that share your wall scope

Most hospitality projects end up with more than one wall product on the same floors. Grouping them in one enquiry gives you consistent colour and joint detailing, one shipment and one point of accountability. On the SANTERSON catalogue these sit close to each other:

  • Decorative wall panel for interior decoration — flat, durable surfaces described as stain-resistant and easy to clean, used for background walls, lobbies and commercial interiors.
  • Modern decorative wall panel — surface textures that read as stone, wood or fabric, which is useful when you want the relief product in one area and a matching flat finish elsewhere.
  • Wall panel systems — for full-height paneled walls where the panel, door and joinery line need to align.
  • Acoustic panels — configurable wall panels made to measure with finish options, for rooms where reverberation is part of the brief.
  • Laser cut metal screen — stainless steel partition screens for reception and lobby feature work, available in finishes such as brushed gold, matte black and antique bronze.
  • Building and construction materials — the wider category covering ceilings, cladding and related finishes for the same package.

4. Build a quantity take-off that survives site reality

Panel procurement goes wrong on quantities more often than on quality. A practical sequence:

  • Measure from the finished wall line, not the structural line, and issue the panel supplier a dimensioned drawing per area.
  • Ask the supplier to cut optimise against your module sizes so joints land where the designer wants them rather than wherever the sheet happens to end.
  • Order one production batch for all visible runs. Split batches across a project are where colour and texture drift appear.
  • Include spares with the first order, sized against your own snag and future-repair risk. Reordering a custom size, colour or pattern later means restarting production, not picking from stock.
  • Hold a signed-off physical sample as the acceptance reference for every delivery.

5. Use custom service to fit your design, and document it

Custom size, colour and pattern are part of this product's published offer, and SANTERSON's custom and OEM service covers bespoke finishes and textures alongside OEM manufacturing. For a hospitality project the useful deliverables to request are a shop drawing per area, a mock-up wall for sign-off before mass production, and a written record of the approved colour, pattern and dimensions attached to the purchase order. Mock-up approval is the single cheapest control you have: it settles joint detailing, lighting response and workmanship standard while changes are still free.

6. Plan logistics around your site programme

Decorative panels are bulky, visible and usually late in the trade sequence, which makes them a programme risk. The logistics and door-to-door delivery service described on the site covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. Confirm for your own project: Incoterms and who carries duty, the packing specification for relief panels (edges are where damage shows), container sequencing so lobby panels arrive before corridor panels if that is your build order, and storage conditions on site.

Ask for a shipment schedule per area rather than one delivery date. Panels that arrive in the wrong sequence sit in a store while the finishing trade waits.

7. Installation, snags and after-sales

Relief panels expose every installation shortcut: adhesive squeeze-out at joints, uneven battens telegraphing through, and pattern mismatch at openings. The site lists installation and after-sales support, including on-site installation, inspection and snagging, warranty coverage, spare parts and ongoing maintenance. Response-time claims and warranty terms are marketing statements until you have them in the contract — put the scope, the exclusions and the spare-parts route in writing before order confirmation.

8. Work to a procurement checklist

StageClose-out item
EnquiryArea schedule, drawings, panel format and finish shortlist, destination port or site address.
Quotation reviewUnit price by area, tooling or custom charges, packing specification, Incoterms, payment terms, production and shipping windows.
ApprovalSigned physical sample, approved mock-up wall, signed shop drawings.
ProductionSingle batch for visible runs, spares included, pre-shipment photographs of packed cartons by area.
DeliveryArea-by-area delivery sequence, damage inspection on arrival against the signed sample.
HandoverSnag list closed with the supplier, spare stock logged, warranty document filed with the O&M manual.

If you are assembling a wall and finish package for a hotel, resort or serviced-apartment project, SANTERSON is a China-based furniture and building materials manufacturer working as a one-stop supplier for hospitality projects, covering decorative panels alongside furniture, ceilings, cladding, lighting and joinery. Send your area schedule and drawings through the contact page and you will receive a specification-based quotation rather than a catalogue price list.