Acoustic panels rarely fail on their own. They fail at the junction — where the panel meets the skirting, where the sliding track meets the ceiling lining, where a made-to-measure size clashes with a joinery module already on the shop drawing. If you are specifying Santerson Acoustic Panels for a villa or apartment fit-out, the work that decides the outcome is coordination: with flooring, ceilings, joinery, sliding systems and loose furniture, all running off one set of dimensions. This guide walks through that coordination sequence from a procurement point of view.

Start with the wall build-up, not the panel finish

Santerson Acoustic Panels sit in the Paneling Systems collection and are supplied to project-specific dimensions, with layout, material and finish selected per space. That flexibility is useful, but it only pays off once the wall build-up is fixed early. Before you choose a surface, confirm three things on site: the finished face line of each wall the panels will land on, the depth available for the substrate and any framing behind the panel, and where services run vertically behind the wall.

Those three decisions drive everything downstream. Panel depth changes the reveal at door frames and window architraves. It changes whether a wardrobe carcass sits proud of the acoustic wall or is planned into the same line. And it changes what the flooring contractor has to do at the perimeter — a panel that stops at the skirting needs a different detail from one that runs down to a shadow gap in the floor.

Coordinate the acoustic wall with flooring and ceiling

Acoustic treatment works as a room assembly, so pair the wall panel with the horizontal surfaces in the same review. In our Australian villa and apartment work, engineered wood flooring is usually specified alongside the panelled walls, and the two have to be sequenced: which one is installed first, and what happens at the perimeter. Floating floors expand; a fixed panel edge does not. Decide the transition detail — scotia, shadow gap or a stop bead — on the drawing, not on site.

Above, ceilings carry their own acoustic responsibility. Where a suspended ceiling is part of the scheme, aluminium ceiling panels are available in solid, perforated and embossed tile options, and perforated tiles can be used with an acoustic fleece. Because those tiles sit on a grid at a set level, the ceiling line becomes the natural top stop for the wall panel — but only if the two trades agree on levels before the panel is cut.

Match finishes across walls, joinery and screens

A panelled wall that reads as a design feature will be judged against every other vertical surface in the room. The Paneling Systems range spans wood veneer, textured and stone and marble surfaces, so the practical approach is to fix one finish schedule covering acoustic walls, wall panel systems, decorative wall panels and any built-in joinery, and issue it as a single document with samples referenced by code rather than by description.

Two habits save rework here. First, group orders by finish family, so panels, panelling and cabinetry from the same surface specification are produced in one batch under the custom and OEM service. Second, keep a written record of every dimension that has been confirmed — panel module widths, track positions, reveal sizes — because made-to-measure production will not tolerate a second version of the truth.

Plan acoustic sliding panels into the opening, not after it

Where a space needs to be closed off and opened up again — a study off a living room, a media area in a penthouse — Santerson Acoustic Sliding Panels do the same acoustic job on a moving plane. They are configurable in finish, layout and dimensions, with made-to-measure sizing.

Sliding systems are where coordination most often goes wrong, because the track is a hard constraint. Settle these before production:

  • Track housing: whether the running gear is recessed into a ceiling lining or surface-mounted, and which trade builds the pocket.
  • Stack zone: where the panels park when open, and what that zone removes from your furniture layout.
  • Floor interface: a bottom guide on a finished floor needs the floor level and the threshold detail fixed in advance.
  • Performance expectation: acoustic performance depends on the selected configuration, seals and detailing — confirm it for the specific build, room by room, rather than assuming a rating from the catalogue listing.

Sequence the order so one supplier carries the interfaces

The real efficiency comes from putting the acoustic wall, the sliding system, the flooring and the joinery with a single one-stop furniture and building materials supplier. Interfaces stop being arguments between separate vendors' shop drawings and become internal production checks. Under a turnkey interior project solution, the same team handles space planning, material selection and product specification, manufacturing and quality control, site coordination, then delivery and installation — which means the panel dimensions and the cabinetry dimensions are reconciled before anything is cut.

For an overseas buyer this also simplifies logistics: freight by sea, air or rail, customs paperwork and door-to-door delivery are arranged centrally. Confirm import terms, duties and delivery scope for your own project rather than relying on general service descriptions.

A practical checklist before you place the order

  • Finished wall face lines issued to flooring, ceiling and joinery trades.
  • Panel sizes measured off completed substrates, not off design drawings alone.
  • One finish schedule covering acoustic panels, panelling, ceilings, flooring and built-ins.
  • Sliding track type, stack zone and floor threshold agreed on paper.
  • Acoustic expectation written against the selected configuration for each room.
  • Installation sequence and responsibility for each interface named in the order.

Coordinate at the drawing stage and the panels install as a straightforward finish. Leave them to be adapted on site, and you will spend the last two weeks of the programme making excuses. Send us your wall elevations and finish preferences and we will specify the acoustic panels, sliding systems and matching surfaces as one package for your project.