Tall, narrow and open-fronted: an open shelf tall cabinet looks like the simplest item in a bathroom schedule to specify, which is exactly why it causes rework. Nothing hides behind a door, so every dimension, shelf height and finish decision shows up on site. For Australian villa, apartment and hospitality projects sourcing these units from SANTERSON in China, the verification work happens before the order, not after the container arrives.

The product page for this line lists made-to-measure sizing, material and finish options, and a layout tailored to the project. It does not publish fixed dimensions, board specifications or load ratings. Treat everything below as a list of items to confirm in writing against your own configuration.

Confirm the cabinet is specified for the right room

SANTERSON groups Santerson Open Shelf Tall Cabinets under bathroom tall cabinets, and the collection copy positions it for residential bathroom projects. Some other tall cabinet lines in the catalogue sit under built-in furniture instead — utility, corner, glass front and integrated appliance units.

That grouping matters when you compare specifications. A unit intended for a wet bathroom environment is specified differently from a hallway or laundry unit, particularly around board choice, edge treatment and shelf depth. Before requesting a quotation, state the room, the exposure to water and humidity, and what the shelves will actually carry: towels and linen, glassware, cleaning products, or heavy stone and ceramic items.

Get the opening dimensions from site, not from drawings

Made-to-measure sizing means the manufacturer builds to the numbers you send. If those numbers come from a drawing rather than a site check, they will not account for finished wall lines, skirting, door swings, pipework, or a floor that has been screeded higher than designed.

For each unit in the schedule, ask your builder to record and sign off:

  • finished floor to finished ceiling height at the exact installation point;
  • clear width between finished wall faces, measured at three heights;
  • projection available once doors, taps and shower screens are accounted for;
  • location of studs, noggings, pipework and electrical outlets behind the unit;
  • whether the unit is freestanding, wall-fixed, or recessed into a niche.

Send those figures with your preferred shelf layout marked up. Because the shelves are open, uneven spacing reads badly from across the room — specify each shelf height rather than accepting an even division of the internal height.

Ask what the board and finish actually are

"Material and finish options" is a starting point, not a specification. For a bathroom in Australia, get the following confirmed on the quotation sheet before production starts:

  • the substrate used for cabinet boxes, shelves and back panels;
  • edge banding material and thickness on all visible edges, including shelf fronts;
  • surface finish type — laminate, lacquer, veneer or paint — and the colour reference you are matching to;
  • how the finish is expected to hold up to wiping down, and what cleaning agents to avoid;
  • whether a moisture-resistant board is offered for this line, and where it applies.

Request a physical sample of the exact panel — box material, edge band and shelf front together — before signing off production. A colour chip or a rendered image is not enough to approve a finish that will sit under bathroom lighting next to your tiles and joinery.

Check load, span and fixing method for open shelves

Open shelving carries its load across an unsupported span. Nothing shares the weight the way a closed carcass with a fixed mid-shelf does. Ask the factory to state, per configuration:

  • shelf depth and the clear span between supports;
  • the shelf support system — fixed pins, concealed brackets, or a fixed carcass shelf;
  • whether shelves can be adjusted on site after delivery, and how;
  • the fixing detail to wall and floor, and what substrate it assumes.

Then check that detail against your own wall. A fixing note written for a solid brick or concrete wall does not transfer to timber stud framing with wet-area lining, which is common in Australian bathrooms. Your builder or installer should confirm the fixing method on site and, where anchorage into studs or noggings is required, set that out before the unit arrives. Where the cabinet is tall and freestanding, ask whether anti-tip restraint is included and where it should be fixed.

Put the finish and packaging decisions in writing

SANTERSON's custom and OEM service covers bespoke finishes, textures and prototyping. That flexibility is useful when a cabinet has to match existing joinery across a project, but it needs tight documentation: the colour or sheen reference, the grain direction for veneers, the handling of visible joints, and which units in the schedule carry which finish.

Logistics support covers sea, air and rail freight, customs paperwork, packaging and container loading, tracking and door-to-door delivery. Confirm for your job: the Incoterms being quoted, who handles Australian customs clearance and duties, the packaging standard for loose tall units — crating, corner protection, individual wrapping — and how each unit is labelled against your room schedule so installers can find it.

SANTERSON also lists installation and after-sales support, including on-site installation, inspection and snagging, spare parts and maintenance. Their published response-time and warranty figures are site claims, so ask for the specific terms that apply to your project: what is covered, for how long, who attends on site in Australia, and how replacement shelves or panels are supplied later.

Order one unit first

For any multi-unit bathroom package, place a single unit ahead of the full order. It lets you check the assembled dimensions, the shelf spacing, the finish under your own lighting, and the fixing detail against your wall type — while changes are still cheap. Imported fit-out already runs on long lead times, so the cost of a trial unit is small beside the cost of re-manufacturing an entire run.

SANTERSON lists villa and apartment projects in Sydney, Melbourne, Perth and North Turramurra on the project cases page. Ask which of those included bathroom joinery packages, and request the specification sheets for the units used there as a reference point for your own schedule.

Send your signed-off dimensions, room schedule and finish references to SANTERSON for a configuration and quotation on this line: Contact us.