A rendering of an arched wardrobe elevation usually arrives with the rest of the joinery package: mood board, finish schedule, room dimensions. What it rarely carries is enough information for a factory to price the work properly. Arched paneled wardrobes sit at the awkward boundary between standard cabinetry and curved bespoke work, so an enquiry that only repeats the drawing tends to come back with questions instead of a quotation. The steps below show how to convert an approved design brief into a wardrobe enquiry our team can quote and build without several rounds of guesswork.

What makes arched paneled wardrobes harder to price than flat-front cases

Most cabinetry enquiries are quoted from three numbers: width, height, depth. An arched paneled wardrobe adds curved geometry to that list, and the curve drives cost more than the material does. The radius of the arch decides how the door frame is bent or assembled, whether the panel mouldings are machined in one run or produced as separate curved components, and how the carcass meets a ceiling that is rarely level. Panel construction, hardware position and the way doors clear an arch at the top of the opening all change with that radius.

Our Arched Paneled Wardrobes are made to measure, so nothing about them is fixed. Finish, layout and dimensions are specified per project, which means the enquiry itself is the specification. When a drawing shows an arch without a radius, or a finish without a substrate, we have to ask before we can quote — and each round of questions adds days to a schedule that was already tight.

Step 1: Confirm the geometry before you describe the style

Send us the opening dimensions first, then the curve. For each wardrobe run we need overall width, height and depth, plus the arch itself: inside or outside radius, where the curve starts relative to the door stile, and whether the arch repeats across every door or appears once as a feature. Ceiling condition matters just as much — a sloped or uneven ceiling changes how a full-height case is scribed and fitted, and it affects how the top of the arch reads in the finished room.

If your brief came from an interior designer, ask for the elevations rather than the perspective view. Perspectives flatter curves; elevations measure them.

Step 2: Specify the panel construction and finish you actually want

"Classic paneled" covers several different build methods, and each one behaves differently once a curve enters the design. Tell us whether the doors are framed with applied mouldings, moulded as a single component, or built as a flat panel with an arched trim line. Then state the finish system: painted, lacquered, veneered or laminated, and the colour reference — RAL number, Pantone code or a physical sample you can post.

Where arches appear elsewhere in the same project, say so in the enquiry. A villa that already uses curved openings, arched niche paneling or arched French doors needs the wardrobe curve to match those radii and profiles, not merely resemble them. We produce these elements in the same facility, so matching curves across doors, wall panelling and built-in storage is a coordination task rather than a compromise.

Step 3: Define the interior layout room by room

The exterior draws attention; the interior decides whether the client is happy six months later. Give us the hanging configuration for each case: long hang and short hang sections, drawer stacks, shelving heights, shoe or accessory storage, and any integrated lighting. A bedroom master suite rarely needs the same layout as a guest room or a walk-in dressing space, and mixing the two in one enquiry produces one compromised answer.

Where a family needs more floor area for storage than a single wall of doors can provide, we often quote a boutique style walk-in wardrobe alongside the paneled cases, keeping the arch language consistent while changing the structure behind it. Comparing both options in one enquiry lets you trade cost against capacity with real numbers in front of you.

Step 4: Group the enquiry with the rest of the built-in joinery

Wardrobes are almost never the only custom joinery on a residential project. Send the wardrobe enquiry together with the matching vanity, media wall, sideboard and full-height storage runs, so one drawing set governs all of them. A single package keeps timber tone, edge profile and hardware consistent across rooms, and it lets us plan production in one batch instead of several small ones.

Projects that start from a strong curved concept often go further than wardrobes alone — the arched niche and full house custom wall cabinet project shows how arched niches, concealed wardrobe walls and an integrated vanity can be resolved as one continuous design. If your brief points in that direction, send the whole elevation set.

Step 5: State where the work is going and when it is needed

Name the destination and the required site date. Port or doorstep delivery, site access, lift dimensions and floor-by-floor sequencing all change how a wardrobe is packed and loaded. Tell us whether you need the cases only, or the fuller scope we also handle — design consultation and specification, production coordination, freight arrangements, on-site installation support and after-sales service. An enquiry that states the destination and the programme lets us quote the scope you actually need rather than defaulting to ex-works pricing.

For villa and residential projects in Australia, mention the stage the build has reached. A wardrobe ordered at lock-up can be built to the architect's dimensions; one ordered after the ceiling is closed needs a site survey first, and that changes both the schedule and the fixing detail.

A short checklist for your next enquiry

  • Elevations with overall width, height and depth for every case
  • Arch radius, curve start point, and which doors carry the curve
  • Panel construction type and finish system, with a colour reference or sample
  • Interior layout per room: hanging, drawers, shelves, lighting
  • Related joinery in the same package — vanity, media wall, panelling, doors
  • Destination, delivery point and required site date

Send those six items with your drawings and the first reply is a quotation with a build schedule, not a list of questions. If you are holding a design brief for arched or classic paneled wardrobes, contact our project team with the elevations and we will confirm feasibility, finish options and pricing.