A raised panel wardrobe door looks simple on a drawing. A moulded frame with a centre panel that sits proud of its surround has been read as traditional for decades, and it is one of the few door styles that carries both classic and transitional interiors. What is not simple is everything that has to be decided around it before a factory can cut anything.
Across the villa and apartment projects we supply from China, wardrobe queries usually arrive with a mood image and a room name. That is enough to start a conversation, not enough to start production. The difference between a wardrobe that fits the scheme and one that needs rework comes down to project details recorded early. Below are the ones our team asks for on every raised panel wardrobe enquiry.
1. The actual profile of the door
“Raised panel” describes a family, not one shape. Frame width, the depth of the moulding, the radius of the edge and whether the centre panel is flat or gently domed all change how the door reads in a room. A shallow, low-relief moulding disappears into a minimalist bedroom with handleless lines nearby. A deep, strongly shadowed profile becomes the feature wall of a master suite.
Send us a reference image and we will match or adjust the cutter path, but tell us which direction you want to move in. Within our Classic Paneled Wardrobes collection the same built-in logic supports recessed panel, arched and decorative moulded variations, so a project can hold one door language across bedrooms, hallway storage and dressing rooms without every room competing for attention.
2. Substrate and finish, chosen for the room not the catalogue
Moulded doors are machined from a substrate and then finished, so both layers need specifying. Painted and lacquered surfaces show their moulding crisply and are the most common choice where the panel profile is the point. A wood veneer or melamine surface changes the character completely: the same profile reads warmer and softer, and grain direction across a run of doors has to be agreed before the panels are cut.
Two practical details decide longevity more than aesthetics. First, the moisture environment — an internal bedroom wardrobe and one facing an ensuite doorway need different board choices and edge treatment. Second, sheen. A high-gloss lacquer on a deeply raised profile will pick up every ridge in the moulding under directional light; a matte or satin finish hides the machining marks and forgives fingerprints in family bedrooms.
3. Door system and clearance
The panel style does not determine how the door moves. Hinged and sliding carcases take different tolerances, and a raised profile on a sliding door needs enough track clearance for the proud face to travel without touching its neighbour. In tight corridors and corner bedrooms this is often the deciding factor, and it is why we ask for the plan view with door swings drawn rather than just elevations.
Where ceiling height is uneven — common in older villas and in renovated apartments — a made-to-measure carcass scribed to the actual wall beats a standard module packed out with filler panels. Our wardrobe production is made to measure as standard, so out-of-square walls are a detail to survey, not a problem to work around.
4. Interior layout against how the room is actually used
The exterior profile sells the wardrobe; the interior decides whether it is used. Before we quote we want to know who uses the room and how. Hanging length for coats and dresses, drawer stacks at waist height, open shelving above the door head, a mirror panel, an island in a walk-in — each of these changes the carcase count and therefore the price.
If the project has separate laundry or linen storage, say so. Consolidating tall cabinets and linen storage into one joinery run usually costs less than buying them as unrelated items, and it keeps the finish consistent through the house.
5. Consistency with the rest of the joinery
A wardrobe ordered alone rarely matches the kitchen that arrives a year later. Paint codes from different batches on different substrates will not match under site lighting, and moulded profiles age differently from flat slab fronts. Where a project includes built-in kitchen cabinetry, vanities or media walls, we recommend putting the wardrobe package in the same production batch so that finishes, edge banding and hardware are drawn from one specification.
For whole-house work this is where a single supplier earns its keep. As a one-stop furniture and building materials supplier, SANTERSON produces wardrobes alongside cabinetry, doors, wall panelling, flooring and lighting for villa and hospitality projects, which means one drawing set and one finish schedule rather than several vendors reconciling their own.
6. Drawings, survey and the approval gate
The detail that most often gets skipped is the sign-off. We produce shop drawings with elevations, carcass sections, door profiles at scale and a finish sample reference. Someone on your side has to initial them — ideally the designer plus whoever will receive the goods on site. Production starts after that approval, so any change afterwards is a variation, not an adjustment.
For projects without an in-house design team, our interior design service covers space planning, 3D renderings and production coordination, so the drawings can come from us and be reviewed by you. The same applies to delivery: freight is arranged door-to-door with customs paperwork handled on our side, and installation and after-sales support are part of the service scope.
What to send with your enquiry
- Room elevations with finished floor levels, ceiling heights and any out-of-square walls noted from survey.
- The door profile you want, with a reference image and the direction of change if you need one.
- Substrate and finish decision, including sheen, plus the rooms the wardrobe faces.
- Hinged or sliding, with clearance dimensions for tracks and door swings.
- Interior layout: hanging lengths, drawer counts, shelving, and any mirror or lighting in the carcase.
- The wider joinery scope, so finishes can be batched together.
- A named approver for shop drawings before production is released.
None of these details are difficult. They are simply decisions, and the ones left unmade become variations after the panels have been machined. Send us the drawings and the profile you are working from, and we will come back with shop drawings, a specification sheet and a quotation for the whole wardrobe package.
Talk to PHILLIP about your wardrobe package — Phone / WhatsApp +86-13928214007 · Email santerson@qq.com · Contact SANTERSON