A swim spa that measures five metres long is easy to shortlist and hard to sign off. Before you commit to Outdoor Swim Spa WS-PC05, the useful question is not whether the model looks right on a datasheet, but what else in the same product family would serve the same plot of ground better — and at what cost in space, power and equipment. This guide sets out how to compare the alternatives methodically, using the published catalogue figures for the WS-PC05 family as the working example.

Start from the site condition, not the model number

Most specification mistakes on a swim spa project come from choosing a model first and then trying to make it fit. Reorder the process. Fix three site conditions before you look at any datasheet:

  • Clear footprint. Measure the slab, deck or terrace, and include working space for access panels, steps and drainage — not just the shell outline.
  • Available power. The total connected load of the unit drives your electrical works. A configuration listed at 2.25 kW and one listed at 6.55 kW are different procurement problems, with different supply, protection and running-cost conversations behind them.
  • Primary duty. Hydrotherapy and lounging, or lap-style training. That single decision removes half the range immediately.

Once those three are fixed you can read a catalogue properly: each line becomes either a match or an exclusion, rather than an interesting-looking product you have to argue yourself out of later.

Read the WS-PC05 baseline

The catalogue entry for WS-PC05 gives a shell of 5000 × 3000 × 1100 mm, one control system, one water pump, one filter pump, 18 jets in total, two LED lights and a total power figure of 2.25 kW. The features shown on the page are water jets, LED lighting, ozone and four water columns. Note that no swim training system is listed for this model — that absence is the single most important fact when you start comparing alternatives.

Treat those numbers as catalogue figures for a standard configuration, not as a fixed specification. Optional items in this range include control systems, UV sterilisation, water pumps, heat pumps, sand filtration, insulation and steps, and what is actually fitted changes the equipment list and the power draw. Get the selected configuration in writing before you compare prices.

The sibling models are where the real choice lives

Within the same five-metre family, three published variants sit close to WS-PC05 and change one variable each. Comparing them side by side is faster than debating features in the abstract.

ModelCatalogue dimensions (mm)Total powerJetsLED lightsSwim training system
WS-PC055000 × 3000 × 11002.25 kW18 pcs2 pcsNot listed
WS-PC05CH5000 × 3000 × 9002.45 kW30 pcs1 pcNot listed
WS-PC05ST5000 × 2400 × 14706.55 kW6 pcs4 pcs1 set
WS-PC05ST-L5490 × 2400 × 14706.55 kW6 pcs4 pcs1 set
WS-PC05ST-S5000 × 2400 × 14706.55 kW6 pcs4 pcs1 set

Two patterns are worth reading carefully, because they overturn the usual assumption that a "better" model simply has more of everything.

More jets is not more capability

WS-PC05CH carries 30 jets against the 18 of WS-PC05, yet it sits at a lower shell height of 900 mm and draws only marginally more power. If the brief is seating comfort and massage coverage for several users in a shallow basin, the higher jet count matters. If the brief involves deeper water or standing use, that same model may be the wrong choice despite looking richer on paper.

The training variants trade width for height

The ST models add a swim training system and rise to 1470 mm while narrowing from 3000 mm to 2400 mm. That is a real site consequence: a narrower shell can fit a terrace that WS-PC05 cannot, but the extra depth changes step design, edge detailing around the deck, and how children or older users get in and out. The ST variants also triple the published power figure, which is the line item most likely to surprise a client at quotation stage.

WS-PC05ST and WS-PC05ST-S carry the same catalogue dimensions and equipment figures, while WS-PC05ST-L extends the length to 5490 mm. When variants look identical on paper, ask what differs in configuration and finish rather than assuming a printing error — and get the answer recorded on the quotation.

Five checks that decide the shortlist

  • Footprint with service space. Confirm the shell against your measured area, then add clearance for steps, plant access and drainage. A model that fits the slab but not the maintenance access will be a problem for years.
  • Connected load against available supply. Compare the published total power of each candidate with what the site can actually supply, including heat pump and insulation options if you intend to use them. Specify the final configuration before any electrical tender.
  • Pump and filtration arrangement. The catalogue lists one water pump and one filter pump for WS-PC05 and WS-PC05CH, and one filter pump with no water pump listed for the ST variants. Ask which pumps are included in your configuration and what each drives.
  • Water treatment scope. Ozone appears on the features list; UV sterilisation and sand filtration appear as options. Decide the treatment train you want, then confirm it is quoted — not assumed.
  • Who uses it, and how often. Jet counts and water columns read well in a brochure but only pay off if the actual users sit in those positions. Match the feature set to the real duty cycle of the household or guest group.
Figures quoted above are catalogue values for standard configurations of each model. Included equipment, options and electrical requirements vary by configuration, so confirm the exact specification of the unit you intend to order before pricing, designing the surround, or arranging power and drainage works.

Look wider when the family does not fit

If none of the five-metre options resolve the brief, widen the comparison deliberately rather than settling. Two longer formats in the range take a different layout approach: a long outdoor swim spa combining a swimming channel with a hydrotherapy relaxation area, and a premium outdoor swim spa built around an acrylic interior, reinforced cabinet and a high-performance water system. Both suit sites where the length is available and the programme wants distinct exercise and relaxation zones rather than one compact basin.

For project teams specifying several scopes at once, the same supplier also publishes swimming pools and swim spas as a category, alongside outdoor furniture for villas and resorts. Grouping the water feature, the poolside seating and the surrounding finishes under one one-stop furniture and building materials supplier reduces interface risk: one party coordinates dimensions, delivery sequencing and site access instead of three.

What to send with your enquiry

1. Site drawing or photographs with measured clear footprint, including access and drainage routes.

2. Available electrical supply: phase, capacity, and whether a heat pump is in scope.

3. Intended duty — hydrotherapy, mixed family use, or training — so the right variant is quoted rather than the default.

4. Required options written out: sterilisation, filtration type, insulation, steps, control system.

5. Delivery and installation expectations for the site, including access constraints for a five-metre shell.

Send those five items with your enquiry and the comparison stops being guesswork: you receive like-for-like quotations on configurations that actually fit the site, instead of a model number chosen by default. If you are weighing WS-PC05 against its siblings for a villa or resort project, share your footprint and power details and the range can be narrowed to one specification with confidence.