A full-height media wall looks simple on a drawing: one composed surface from floor to ceiling, the screen recessed into it, everything else hidden. The difficulty appears at the value-engineering stage, when a specifier has to decide whether Santerson Full Height Media Walls is the right line item, or whether a different wall system delivers the same result for less coordination effort. That comparison only works if the alternatives are genuinely comparable. Compare a made-to-measure built-in against a modular shelving module, or against a loose TV cabinet, and you are not comparing prices — you are comparing three different scopes of work.
The sections below set out how to group the options so the comparison holds up in a quotation review, what has to be fixed before pricing is meaningful, where the real cost sits, and which questions to put to a supplier before any award.
Start with the job the wall has to do
Before looking at collections, write down what the wall is being asked to carry. Four factors decide which family of product can actually satisfy the brief:
- Screen and service zone. A screen standing on a cabinet behaves differently from one recessed into a panel, which in turn differs from one that has to be hidden behind sliding panels when switched off.
- Storage balance. Open display niches and closed cupboard volume are not interchangeable. A villa lounge that has to absorb games, cables, blankets and tableware needs closed frontage; a hotel-style display scheme can carry more open shelf.
- Ceiling condition. Whether the unit stops at a true ceiling, a shadow reveal or a bulkhead changes setting-out, and it is one of the items most often re-priced on site.
- Adjacent finishes. A media wall that continues into panelling, a concealed door or a stone surface needs one supplier controlling the junctions, otherwise the interface detail becomes a site problem.
Once those four are fixed, alternatives can be compared honestly, because you know what has to be included in each price.
Group the comparable options before you compare them
Option A — Full-height media wall systems
The Media & TV Walls collection is where a like-for-like comparison begins. Alongside Santerson Full Height Media Walls, the same collection carries Santerson Integrated TV Panels for a screen worked into a continuous panel surface, Santerson Sliding Panel TV Systems where the screen has to be hidden behind moving panels, Santerson Backlit Feature Walls where illumination is part of the composition, and Santerson Storage & Display Combo when open display and closed storage share one elevation. Each of these listings is described on site as configurable, with finish, layout and dimensions specified to suit the space — which means the collection is priced per project rather than from a fixed catalogue rate.
The practical point for a comparison: keep all of these in one bid package. They share substrate, finish and junction logic, so moving between them is a design decision, not a change of supplier.
Option B — Storage walls with the screen absorbed into storage
Where the media function is secondary to storage volume, the Integrated Storage Walls side is often the better fit. Santerson Full Height Storage Walls is listed with made-to-measure sizing and configurable material and finish options, and Santerson Integrated Media Storage treats the media zone as one compartment inside a larger storage wall. If the client's complaint is clutter rather than the screen itself, this route usually yields more usable volume per linear metre of wall.
Option C — Modular living systems and floor-to-ceiling shelving
If the elevation does not need a closed, panelled face, Santerson Floor to Ceiling Modular Systems and Santerson Mixed Open & Closed Systems give an open, layered look with made-to-measure sizing still available. They read lighter in a room and cost less in panel and hardware content. The trade-off is exposure: open shelving shows what is on it, and a screen sitting within open shelving does not get the same recessed treatment as a panelled wall.
Option D — Wall-mounted and floating units
Santerson Wall Mounted Media Walls and Floating TV Units stop short of the ceiling. They are the sensible answer where floor level is crowded, where underfloor heating or a tiled skirting zone should stay uninterrupted, or where the client wants visual lightness rather than a solid wall. They are not, however, substitutes for a full-height build when the design intent is a single unbroken surface — and mounting requirements have to be confirmed for each project.
Option E — Loose furniture
Santerson Freestanding TV Cabinets, Santerson Open & Closed Combo Units and Santerson Integrated LED Media Units belong in this comparison only when the brief has changed. Loose units arrive as freight, need no setting-out against ceilings and can be replaced later. That is a legitimate value-engineering outcome for a rental or a fast-programme job — but it should be recorded as a change of intent, because the wall finish behind the unit still has to be built by somebody.
Fix these items before prices can be compared
Configurable systems quote differently depending on what the drawing already answers. The following six decisions cause most of the variance between two nominally identical tenders:
- Dimension basis. Overall width and height, plus how returns and corners are measured. One supplier quoting finished face dimensions and another quoting carcass dimensions will produce prices that cannot be reconciled.
- Screen recess and fixing. Recessed niche or surface-mounted, the bracket type, and who supplies the structural support behind the panel.
- Cable and device routing. Where power and signal outlets land, where a set-top box or soundbar sits, and whether an access panel is needed for later servicing.
- Ventilation for enclosed equipment. Devices boxed in by closed fronts need an airflow route agreed at design stage rather than improvised on site. Confirm what the selected carcass allows.
- Integrated lighting. Any illuminated niche or shelf needs driver location and control method stated; lighting specification is a separate line item that is easy to leave out of both drawings and budget.
- Hardware and door behaviour. Sliding panels need track, running gear and clearance confirmed; hinged fronts need swing and handle logic resolved. These are the components most often quoted as provisional sums.
Where the design continues past the media unit, Santerson Acoustic Panels and Santerson Decorative Concealed Doors can be brought into the same package so that reveals, trims and door lines are resolved by one maker.
Where the cost actually sits
For this category of work, panel material is rarely what separates two quotations. The gap comes from made-to-measure content: how many non-standard cuts and returns there are, how much moving hardware is specified, whether lighting and electrical containment run through the unit, and how many junctions have to be closed against plaster, stone or joinery on site.
That is why an apparent saving from switching to a modular or loose alternative should be checked against what the project then buys somewhere else — a built-in wall carries its own finished surface and storage, while a floating unit typically leaves the wall finish, the screen support and concealed cabling to other trades. Read the two prices as scopes of work, not as product prices.
Questions worth asking before you award
- Which collection is being quoted — Media & TV Walls, Integrated Storage Walls or Modular Living Systems — and does the quotation state it by name?
- Is the price based on made-to-measure sizing from a site survey, or on nominal module sizes with site packing out?
- Which finishes and substrates are offered for the specified look, and can a physical sample be issued before order?
- Are the screen recess, bracket support, ventilation route and access panel included in the unit price or shown as extras?
- Who signs off the setting-out drawing, and at what point does it become fixed against site dimensions?
- What is included for packing, freight and on-site installation, and where does after-sales cover begin?
How a single supplier changes the coordination load
A media wall rarely stays inside its own elevation. It meets flooring, wall panelling, ceiling lines, lighting circuits and sometimes a concealed doorway. Santerson is positioned as a one-stop furniture and building materials supplier, with the workflow on the services pages running from design consultation and space planning through material selection, manufacturing and quality control, project management and site coordination, to installation and handover. For a wall system that has to align with several other finishes, that single point of responsibility is where the saving usually appears — fewer interface drawings, one set of dimensions, one party answering for the junction.
The same logic applies beyond the unit itself. Custom & OEM service covers bespoke finishes and textures when a project needs a specific grain or colour matched to existing joinery, logistics and door-to-door delivery covers freight, packaging and customs paperwork, and installation and after-sales support covers fitting, inspection and snags. Confirm the current scope, terms and coverage for your own project rather than assuming published service descriptions apply unchanged.
A short comparison you can paste into a value-engineering sheet
- Full Height Media Walls / Integrated TV Panels: one continuous finished surface, screen recessed or integrated. Highest coordination value; requires early fixing and services decisions.
- Sliding Panel TV Systems: screen hidden when off. Adds track and running gear to cost and to the setting-out check.
- Full Height Storage Walls / Integrated Media Storage: maximum closed volume, media as one compartment. Best where clutter is the driver.
- Floor to Ceiling Modular Systems / Mixed Open & Closed Systems: lighter, more open character, lower panel content. Accepts visible storage.
- Wall Mounted Media Walls / Floating TV Units: floor left clear, visual lightness. Wall finish and screen support sit outside the unit.
- Freestanding cabinets and combo units: fastest route, no built-in coordination. A change of design intent, not a like-for-like swap.
Specifying a full-height media wall well is mostly an act of definition: name the collection, fix the six decisions above, and price every option on the same scope. Do that and the comparison between Santerson Full Height Media Walls and its alternatives becomes a decision about use and appearance rather than a negotiation over what each price quietly leaves out.
For project-specific sizing, finish selection and quotation, send drawings and room dimensions through the contact page, and review completed work in the project cases section.