If you are specifying the Washdown One Piece Toilet 1004A, Modern Ceramic Bathroom Toilet for a hotel, villa or apartment programme, OEM sourcing is not about changing the shape of a toilet. It is about deciding what the factory controls — branding, packaging, trap and rough-in choice, finish details and quantities — and how those decisions move through design confirmation, production, freight and site installation. Below is that sequence step by step, with model 1004A as the working example.
What OEM Means For A Ceramic Toilet
In a standard purchase you take the catalogue item exactly as published. In an OEM arrangement the manufacturer produces to your specification and, in many cases, to your brand marks. For a vitreous ceramic toilet that usually covers four areas:
- Identification — logo on the seat cover or packaging, carton marking, model coding that matches your internal item numbers.
- Hydraulic fit — which trap variant is produced for which building, so floor-drain and wall-drain bathrooms are covered by one item family.
- Combination parts — seat, cover and fixing set specified together with the pan, instead of sourced separately on site.
- Order structure — batch quantities split by room type or by phase, so what arrives matches what is being installed that month.
SANTERSON describes its custom and OEM scope as covering bespoke design and prototyping, material and finish selection, OEM manufacturing, flexible minimum order quantities and brand customisation such as engraving, embossing, logos and packaging. Confirm which of those options apply to a ceramic item when you send the enquiry; what applies to joinery or outdoor furniture does not automatically transfer to sanitaryware.
Reading The 1004A Specification Before You Ask For A Quote
The product page describes model 1004A as a one-piece washdown toilet with a square-rounded silhouette, made of vitreous ceramic with a dense glossy glaze that resists staining, limescale and yellowing. The integrated tank-and-bowl construction removes the gap between the two parts, which is where dirt collects on a two-piece pan — a practical point for housekeeping in guest bathrooms.
The detail that drives your enquiry most is drainage. The page lists two installation options: P-trap wall drain at 180 mm rough-in and S-trap floor drain at 250 mm rough-in. Those figures come from the product page; check them against the current technical data sheet for your project before any plumbing coordinate drawing is issued, because a wrong rough-in is expensive to correct once the pipework is in.
Once you know which trap each room type uses, an OEM enquiry becomes concrete. You can ask for a mix of P-trap and S-trap output within one order rather than two separate lines, and you can hold both variants under one item code in your bill of quantities.
Step 1 — Send A Room-By-Room Schedule, Not A Product Name
The fastest way to slow an OEM project down is to send a model number and ask for a price. The factory then has to guess quantities, variants and timing. Send instead:
- Room schedule with the toilet type assigned to each room type or floor
- Total quantity per variant, split by phase if the handover is staged
- Whether branding or packaging marking is required, and where it should appear
- Destination port or site address, and the delivery terms you intend to work to
Step 2 — Confirm The Detail Drawings Before Production Opens
SANTERSON's interior design and project service describes a sequence of brief and design proposal, quotation with detail confirmation, then production, shipment and follow-up. For an OEM sanitaryware order the same gate applies: nothing enters production until the item detail — glaze finish, seat specification, trap variant per line, carton marking — is signed off. Ask for a pre-production sample or a written spec sheet in your own document format so your consultant can countersign it.
This is also the point to fix spares. Guest bathrooms get replaced under maintenance cycles, and re-ordering a discontinued variant later creates a visible mismatch. Order a spare quantity with the initial batch and record the item code against it.
Step 3 — Production And Quality Control
Ceramic output is checked on glaze consistency, flushing performance and physical condition after packing. For a project order, agree in writing what is inspected before shipment and how defects are reported, so an inspection at destination has an agreed baseline. If you need items held back for a later phase, say so at this stage — batch colour and finish matching across separate production runs is easier to manage when it is planned than when it is discovered.
Step 4 — Freight, Documents And Delivery
SANTERSON states global freight forwarding by sea, air and rail, with customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery. Its logistics page also refers to commercial invoices, packing lists, certificates of origin and import permits. Treat those as service descriptions rather than guarantees: confirm transit time, Incoterms, insurance cover and who handles clearance for your specific destination before you commit to a programme date.
Ceramics travel badly when palletisation is an afterthought. Ask for the packing specification and the container loading plan, and check that carton marking matches the room schedule you sent in step one. That single alignment is what allows a site team to unpack by floor instead of sorting on the ground.
Step 5 — Installation, Snags And Spares
The installation and after-sales service described on the site covers on-site installation, inspection and snag lists, warranty coverage, spare parts or replacement and ongoing maintenance. The stated response targets are page claims, so get the actual terms for your project in writing: what is covered, for how long, and who carries out the work at destination.
On site, hold a sample pan of each trap variant until the pipework inspection is complete. Rough-in dimensions should be verified against the as-built coordinate drawing before any pan is fixed down — this is where an OEM order either pays off or becomes a problem.
Coordinating The Rest Of The Bathroom On One Order
A guest bathroom rarely needs only a pan. Specifying the rest of the sanitary set with the same supplier removes matching risk between items that sit side by side. From the same catalogue you can specify the Wall Hung Toilet 1038W, Rimless Ceramic Wall Mounted WC for Modern Bathroom where a wall-mounted frame and clear floor are preferred, or the Two Piece Washdown Toilet 1038A, Dual S Trap & P Trap Ceramic WC Toilet for Hotel Bathroom where a two-piece format suits the budget and service access. Pair those with Modern Rainfall Shower System with Handheld Sprayer sets and the wider range of Bathroom Sanitary Fixtures, so one supplier answers for glaze tone, item coding and delivery scheduling across the wet areas.
That coordination is where sourcing ceramics and joinery from one Custom Furniture Manufacturer changes the procurement picture: vanities, cabinetry and sanitaryware can be specified against the same drawing set and shipped on the same schedule rather than reconciled between unrelated vendors.
A Practical Checklist Before You Commit
- Trap variant confirmed per room type, rough-in checked against as-built drawings
- Seat, cover and fixings quoted with the pan, not after it
- Branding and carton marking approved in writing before production opens
- Spare quantity ordered with the first batch, item code recorded
- Packing specification and loading plan reviewed before shipment
- Incoterms, insurance and clearance responsibility named for your destination
- Warranty terms, exclusions and at-destination service confirmed on paper
OEM sourcing works when the specification is finished before the factory starts. Send the room schedule, sign the detail drawings, then let production, freight and installation follow in that order — and keep every figure you rely on tied to a current technical sheet rather than a marketing page.