A natural oak veneer wardrobe looks simple on a drawing: warm oak across the doors, a run of cabinets fitted to the wall, handles that either disappear or become the detail. The procurement behind that one line is rarely simple. You are specifying a thin natural material onto a substrate, in dimensions nobody stocks, for rooms whose light and humidity differ from floor to floor. That is where custom & OEM service earns its place on the schedule — it moves the decisions about grain, substrate and construction to the factory that will build the units.
This article follows one product line, Natural Oak Veneer Wardrobes, part of the Wood Veneer Wardrobes collection, and walks through how OEM sourcing for it runs in practice: from the first shop drawing to the panels on site.
What you are actually specifying
Veneer wardrobes are made to measure. The specification covers three things at once: sizing that follows the room rather than a catalogue, a chosen material and finish, and an internal layout set out per project. Dimensions and selected specifications need confirming for each project before anything is cut, because the wall you measured in month one may not be the wall the builder hands over in month six.
Separating the specification into layers, and settling them in order, keeps the decision deadlines clear:
- Dimension layer — overall run, heights, reveals, skirting and cornice treatment, and how each unit meets a floor that will not be perfectly level.
- Surface layer — the veneer species and cut, the sheen level, and how the doors read under the room's own lighting rather than in a sample held up to a window.
- Layout layer — hanging space against drawers against shelves, and what sits inside the carcass that nobody photographs but everybody uses.
Each layer has its own cut-off. Dimensions lock when the builder's setting-out drawings are issued; surface and layout can move later, but every change restarts shop-drawing approval.
Stage 1 — brief, shop drawing, prototype
OEM sourcing starts with a brief, not an order. The information that shortens the loop is unglamorous: room-by-room elevations, the door type you have in mind (hinged, sliding, open or walk-in), and a note on which rooms carry moisture, because bathroom and laundry-adjacent runs behave differently from a bedroom.
From that brief the manufacturer returns shop drawings. Read them as a buyer. Check that every dimension can be verified on site, that the door reveal and shadow gap are drawn rather than assumed, and that internal fittings appear where your layout needs them. Where a project genuinely needs proof before you commit — an arched niche where the curve has to match the architecture, or a walk-in run with an island — ask for prototyping explicitly. The Custom & OEM service covers custom furniture design and prototyping alongside bespoke finishes, but it is an option you request, not one that arrives by default.
Stage 2 — grain, sheen and the sample you sign off
This is where veneer orders are won or lost. Oak has figure, and two boards can read differently once they are fixed to a wardrobe face in afternoon light. Settle four questions before production:
- Cut and sequencing — how leaves are arranged across the run, so grain repeats sensibly across adjacent doors instead of clashing at the reveal.
- Sheen — the same species looks different under each treatment. The collection spans both directions; comparing Matte Finish Veneer Wardrobes against High Gloss Veneer Wardrobes is the quickest way to decide which suits the room.
- Edges and profiles — wherever veneer wraps an edge, a handle detail or a light groove, that line is what the eye follows. Specify it; do not leave it open.
- Substrate and construction — the material behind the face carries the hardware and the weight of the door, so it belongs on your approval sheet rather than in the factory's internal notes.
Approve a physical sample panel, keep it on site, and name it as the reference for delivery. When the panels land, that panel is how you judge whether what shipped matches what you signed.
Stage 3 — OEM terms: quantity, branding, tolerance
If you are buying under your own brand, or supplying a development where the joinery carries a mark, OEM terms come into play. Flexible minimum order quantities make per-project ordering realistic instead of forcing stock batches, and brand customisation — engraving, embossing, logos, packaging — has to be defined at drawing stage, because a mark applied to a veneered face is designed around the grain.
Two commercial points are worth fixing before you sign:
- What counts as a match — agree how much variation in colour and figure is acceptable across one run. Natural veneer will not be uniform; the argument is about degree, and it costs far less to settle on paper than to have on site.
- What a change order costs — state what a dimension change costs after shop drawings are approved, and who pays for re-cut panels.
Stage 4 — production, packing, paperwork
Once the sample is signed off, production runs to the approved drawings with quality control at the factory. For wardrobes the checks that matter are dimensional consistency across the run, finish continuity between panels from different batches, and hardware positions pre-set rather than left for the installer to judge.
Then comes the part buyers leave too late: freight. Door-to-door delivery covers forwarding by sea, air or rail, packaging and container loading, shipment tracking, and customs paperwork such as commercial invoices, packing lists and certificates of origin. Ask for the packing list early and check it against your room schedule — panels labelled by elevation are worth considerably more to an installer than panels labelled by box number.
Import terms, duties, Incoterms, insurance and transit time are settled case by case for each destination. Treat published service descriptions as a starting point and confirm the specifics for your project in writing before production starts.
Stage 5 — installation and the snag list
Veneer joinery fails at the joins, not on the faces. On delivery, inspect before signing anything: look for edge chips and corner bruising on door fronts, hold two doors side by side to compare sheen and figure, and confirm every unit in the schedule arrived. Then watch the installation — how units are scribed to the wall, how doors are hung and adjusted, whether reveals run consistently from one end of the run to the other.
Raise snags while the installers are still on site: door alignment, soft-close adjustment, touch-in of visible edges. Anything needing a replacement panel goes in on the same day, so the spare-parts route starts early rather than after handover.
Buyer's checklist
- Elevations for every room, with moisture exposure noted per room.
- Door type and internal layout fixed before shop drawings are requested.
- A physical veneer sample approved, kept on site, named in the order.
- Agreed tolerance for grain and colour variation across a run.
- Branding or engraving details confirmed at drawing stage, if required.
- Packing list cross-checked against the room schedule before unloading.
- Snag list raised on site; panel damage reported the same day.
OEM sourcing suits this product because nothing about it is off the shelf. Sizing, finish and layout are all specified per project, so the value sits with a manufacturer who can hold those decisions in one place — design consultation, material selection, manufacturing, quality control — and then get the panels to the building with paperwork that lets them clear without a delay. As a furniture and building materials supplier working villa and hospitality projects end to end, SANTERSON runs that sequence as one contract rather than three scattered across three countries.
Pricing a joinery package? Send the elevations and the room schedule. Specify the run, the sheen and the layout, and ask for shop drawings plus a veneer sample before anything is committed to production.