A wabi-sabi rattan kitchen with an island is one of the easiest kitchens to sketch and one of the hardest to price correctly. The look depends on material honesty — real wood grain, woven cane, warm low-kelvin light — so a quote built from a single sentence such as "natural wood kitchen, 5 metres, with island" will come back either inflated or useless. Below is the information we ask project buyers to put in the request for quotation, and what each item changes on our side of the table.

Start with the room, not the style

Send drawings before anything else. A dimensioned floor plan, elevations of both runs of cabinetry, and the position of every fixed appliance are enough for us to work from. For an island kitchen in wabi-sabi rattan, tell us whether the island is a working counter, a dining extension or both, because that decision drives the carcass depth, the seating overhang and the amount of storage we build underneath. Our wabi-sabi rattan kitchen cabinets with island are made to custom dimensions with custom internal partitions, so a plan without measurements forces us to guess — and guesses become change orders later.

If the project is a villa renovation or a boutique hotel fit-out, include the room's ceiling height and the wall build-up. Rattan panels need ventilation behind them, and a full-height cabinet against a clad wall needs a different fixing detail than one against masonry.

Name the materials you actually want

"Wood look" and "wood" are two different prices. Our wabi-sabi range pairs a solid wood frame with woven rattan panels, and we finish it in a specified wood colour and surface treatment. In your RFQ, state:

  • Frame material — solid wood or engineered board for the carcass, and which parts you expect to be solid.
  • Weave — open cane, closed weave with paper backing, or a woven panel set into an aluminium frame if the environment is humid.
  • Wood colour and surface treatment — matt lacquer, open-pore oil, or a tinted finish; send a RAL or a physical sample reference rather than a photograph.
  • Worktop — material, thickness and edge profile, including how the island top meets the counter run.
  • Hardware — hinges, drawer slides, support legs and brackets. We supply matching hardware, so say whether you want soft-close throughout and whether handles are acceptable or the fronts must stay handleless.

Where a project needs cabinetry treated as an interior fixture rather than loose furniture — apartment blocks, serviced apartments, hotel kitchenettes — custom built-in kitchen cabinets for hotel and apartment projects follow the same information list, with panel material and finish repeated unit by unit so every bathroom and kitchen matches across the building.

Specify the built-in appliances and services early

Appliance schedules are where most quotes go wrong. Our island kitchens reserve positions for built-in ovens, and the reserved opening has to be drawn around the exact model you intend to buy. Send the appliance list with model numbers: oven, hob, extractor, dishwasher, refrigeration, wine storage. Add the plumbing and electrical points, including where the island's services drop through the floor or run in the carcass. If the lighting design includes recessed warm LED strips in open shelving — a signature detail of this style — tell us whether we supply the driver and the profile or only the rebate.

Give quantities, sites and phasing

One kitchen for one villa and twelve kitchens across three villas are quoted differently. State the number of sets, the site addresses, and whether the work is phased. For multi-unit work, note where units repeat so we can tool and batch accordingly.

Project typeWhat to add to the RFQ
Single villa or residenceDrawings, finish samples, appliance models, delivery address and access notes.
Boutique hotel or serviced apartmentsRoom schedule with a typical unit type, repeat quantities, wear and maintenance expectations, site storage limits.
Multi-site developmentPhasing plan, separate delivery addresses, inspection and handover sequence per phase.

State the commercial terms you need quoted

Tell us how far you want our scope to reach. We quote production as a baseline; if you want it delivered, say which port or site address and whether you expect door-to-door delivery with customs paperwork handled for you, since our logistics and door-to-door delivery service covers freight by sea, air and rail along with the associated documentation. If installation is part of your expectation, say so in the RFQ — we provide on-site installation, inspection and snags as a separate line item, and it should be priced from the start rather than added after the cabinets are built.

Also state the currency you want to work in, the payment terms you normally offer, and the date you need a priced response by. If your programme has a fixed handover date, give us that date; it determines whether we batch your units or run them separately.

What a good RFQ looks like: worked example

Villa renovation, four kitchens. Attached: PDF floor plans and elevations for each unit; island 3.0 m × 1.0 m with 350 mm seating overhang on one side; solid wood frames, woven rattan panels on wall units only; requested wood colour to sample reference WS-2 matt; worktop in stone, 20 mm, square edge; built-in oven and steam oven per model number, induction hob, integrated dishwasher; warm LED strip in open shelving, rebate only. Hardware soft-close throughout, handleless fronts. Two units delivered first, remaining two six weeks later, to the site address listed. Installation required on all four units. Quote in USD, door-to-door to the named port, and separately for supply-only.

A request written that way lets us return a firm number instead of a range. It also protects you: when two suppliers price the same information, you can compare them line by line rather than discovering after award that one quote excluded the island carcass and the other excluded hardware.

Send the drawings with your enquiry

If you are preparing a tender package and want to check whether your specification is complete, send it to us as a draft. We review drawings for missing appliance positions, unclear finish call-outs and rattan applications that need a different fixing detail, and we will tell you what is absent before the RFQ goes to three other suppliers. That review costs nothing and usually saves a round of amendments on every quote you collect.

SANTERSON — custom cabinetry and interior fixtures for villa, hospitality and apartment projects. Include drawings, material call-outs, appliance models, quantities and delivery terms in your first message, and we will price the whole scope.