A corner base unit with a rotating shelf set looks simple on a drawing. It is one of the few kitchen items where the cabinet box, the hardware and the site opening all have to agree before anything is cut. If you are buying Lazy Susan corner cabinets from an overseas manufacturer for a villa or apartment job in Australia, most of the risk sits in what was never written down. Below is the shortlist we suggest you work through before you place a purchase order.
Confirm the geometry of the corner before you choose the mechanism
Lazy Susan corner cabinets are described in different ways by different suppliers, and a quotation that only says "corner unit" can arrive as any of them. Before anything else, settle which mechanism is being quoted: a rotating shelf set on a central support, or pull-out carriers on a slide. Each needs a different carcass, and the fixing centres are not interchangeable.
Then get three numbers on paper for every corner: the finished wall-to-wall opening on both legs, the depth of the run, and what sits at right angles to the corner, whether that is an appliance, a tall pantry or a return bench. A square corner with one clear leg behaves differently from a corner where a refrigerator abuts one side, because the door has to swing past it.
Next, decide which corner layout you are actually specifying. Within our built-in furniture range, the corner kitchen cabinet family covers several options, and they are not interchangeable:
- Lazy Susan corner cabinets: rotating shelves reached through a single hinged door; suits deep corners that store pots and small appliances.
- Pull Out Corner Cabinets: carriers on a slide that bring the corner contents forward; suits narrow legs where a rotating door would foul.
- L Shaped Corner Cabinets and U Shaped Corner Cabinets: fixed or adjustable shelving across the two legs, usually the least mechanical option.
- Open Shelf Corner Cabinets and Glass Front Corner Cabinets: display rather than storage, with no mechanism to service.
Ask the supplier to state which of these is being quoted, and check that the product name on your order matches the page it came from. If a listing title and its specification block use different names for the same unit, ask for one written answer before you commit.
Ask what is included in the price: box, hardware, or both
The rotating shelf set is often a separate component from the carcass. On a quotation, check whether the trays, the central support, the door hinges and any soft-close hardware are listed as included, optional, or "site supplied". If the mechanism is not on your order, your installer is sourcing it locally at short notice, and the fixing centres may no longer match the carcass you imported.
For our corner cabinets we build to the dimensions of each project rather than to a fixed module: sizing is made to measure, material and finish are selected per project, and the internal layout follows the plan. That flexibility is useful, but it means the burden of accuracy moves to your drawings. Send measured, as-built dimensions, not design-stage ones, and have someone on site confirm them before production starts.
Get the load capacity and tray specification in writing
Lazy Susan shelves get loaded unevenly: a stack of pans on one side, spice jars on the other. Ask the supplier for the tray load capacity and the fixing detail for the central support, and keep that answer attached to the order. If no figure is published for the mechanism you are buying, treat it as an open item rather than assuming standard hardware will carry your specification.
Also settle the door line. Our corner units can be specified with handleless or hinged fronts, and in finishes such as matte lacquer, high gloss, acrylic, melamine or wood veneer, so the front can match the rest of the kitchen run. Order a physical sample of the exact finish you have chosen rather than relying on a screen image; veneer and gloss finishes in particular shift under Australian light.
Check substrate and edge detail for wet-area exposure
Corner cabinets under a sink run sit closer to water than the rest of the kitchen. Ask which board is used for the carcass and the doors, what the edge banding material is, and how cut-outs for the sink and plumbing are sealed. Those three answers matter more over time than the colour you selected. If the unit sits near a splash zone or an outdoor-adjacent kitchen, raise that at quotation stage so the board and finish can be chosen accordingly; the selection has to be made before manufacture.
Decide who measures, who installs, and who handles snags
This is where imported joinery most often goes wrong on Australian jobs. Before ordering, write down: who took the site dimensions, who signs off the shop drawings, whether the units arrive flat-packed or assembled, and who fits them. Our installation and after-sales support covers on-site fitting, inspection and snags, but the local measurement sign-off stays with whoever is on site, so name that person in the project programme.
Two practical points follow. First, request shop drawings for every corner and have your installer check door swing and handle clearance against appliances and skirting on the actual plan. Second, agree in writing who pays for a remake if a dimension turns out to be wrong, and what happens to the schedule when one unit is rebuilt. Settle that before production starts, not after.
Set out delivery terms and unpacking checks
Freight arrangements (sea, air or rail, customs documentation, packaging and container loading) are handled as part of our logistics and door-to-door delivery service. Confirm the Incoterms on your quotation, who acts as importer of record, and which port or site the delivery runs to; Australian import terms and duties are settled case by case with your broker. Then inspect at unpacking: carcass squareness, door alignment, mechanism completeness and any transit damage. Photograph anything damaged before signing off, because hardware claims are far harder to make once the units are in the wall.
A short pre-order checklist
- As-built dimensions for both corner legs, plus what abuts each leg.
- Named corner type (lazy Susan, pull-out, L-shape, U-shape, open shelf or glass front).
- Mechanism included or site-supplied, with the tray load capacity stated.
- Board substrate, edge banding and cut-out sealing for wet-area corners.
- Finish sample approved physically, matched to the rest of the run.
- Shop drawings signed by the person measuring on site.
- Incoterms, importer of record and delivery address agreed in writing.
- Remake terms for a wrong dimension agreed before production starts.
Work through those eight items and the corner stops being a guess. Load capacity, dimensions and service terms are confirmed on quotation for each project, so get them in writing rather than reading them into a catalogue page. Send us your plan and the corner dimensions and we will quote the layout, hardware and finish against them. Start that review on our contact page.