A drawer-focused modular wardrobe looks simple on a drawing until the first quotation comes back with three different drawer stacks, two door styles and a finish name nobody in the office recognises. For buyers working on villa, apartment and hospitality bedroom packages, the conversation around this product type is where budget and buildability are actually decided. This guide sets out the customisation decisions worth putting on the table before an order is placed, using our Drawer Focused Modular Wardrobes as the reference point.

Start With the Room, Not the Wardrobe

Modular wardrobes in this collection are made to measure: dimensions, layout and finish are specified per project rather than picked from a fixed catalogue size. That flexibility only pays off if the buyer supplies real information early. Before anything is drawn, we ask for finished floor levels, wall-to-wall distances at three heights, the position of skirting, power points, switches and air-conditioning returns, and the ceiling detail the wardrobe has to meet.

Two details cause most rework on drawer-heavy joinery. First, out-of-plumb walls in older villas and renovation sites change carcass depth along the run, which is exactly where a bank of drawers binds. Second, carpet, timber flooring and underlay thickness affect whether the bottom drawer clears the floor covering when pulled out. Confirming these on site — not from as-built drawings alone — keeps the drawer bank usable.

Drawer Layout: Count, Depth and What Goes Where

"Drawer focused" describes a storage bias, not a fixed recipe. The practical question for a buyer is how many drawers, at what heights, and what each one holds. A single stack of five shallow drawers wastes vertical space for folded knitwear and stores very little; three deeper drawers in the same footprint usually serve a bedroom better.

  • Zone by habit, not by symmetry. Everyday folded items belong at waist-to-chest height. Off-season storage and luggage go above the drawer bank; heavy items go below it.
  • Fix the drawer count per module width. Narrow modules suit one wide stack; wider modules can take two stacks side by side, but each stack needs a clear pull path in front of it.
  • Decide what sits beside the drawers. A hanging section next to the drawer bank is where most mixed layouts come from. Our Hanging Modular Wardrobes and Shelf Focused Modular Wardrobes are drawn to the same carcass logic, so mixed runs stay consistent.
  • Keep the top drawer purpose-specific. Jewellery, watches and documents need shallower boxes or dividers; clothing does not.

Hardware: The Line Item Buyers Most Often Skip

Drawer performance is decided by runners and by how the front attaches, yet hardware is frequently left to the factory's default. Put these on the specification sheet:

DecisionWhat to specify in writing
Runner type and ratingFull-extension or partial extension, load rating per drawer, and whether soft-close is required on every drawer or only the top one.
Drawer box buildBox material and edge treatment, back panel fixing, and whether the box colour matches the carcass or the interior accent.
Front attachmentIntegrated handle, routed groove, push-open or a separate handle — each changes the door-to-door gap and the finish detail.
Alignment allowanceThree-way adjustable fronts matter on long runs where floor level shifts; ask for it rather than assuming it.
Spare partsOrder spare runners and one spare front per layout type. Replacement lead times are far shorter when spares ship with the container.

Materials, Finishes and the Samples Worth Ordering

Material and finish options are part of the standard configuration for this collection. Rather than choosing from a colour code in an email, ask for physical samples of the panel, the edge banding and — where relevant — the veneer or lacquer used on the door fronts. Edge banding in a slightly different tone is one of the most common reasons a delivered wardrobe does not match the approved sample.

For projects specifying a handleless look, our Custom Minimalist Bedroom Wardrobe page describes how flat panels and integrated openings are detailed; the same detailing rules apply to drawer fronts in a modular run. In humid bathrooms and laundry-adjacent bedrooms, ask which board and edge treatment is specified for the carcass base, since that part sits closest to the floor.

Door Style Changes the Drawer Plan

Hinged, sliding and open configurations each constrain the drawer bank differently. Sliding fronts need an overlap allowance and a track recess, which reduces the usable opening in front of the drawers. Hinged doors allow full access but need clearance to swing. Open layouts remove the question entirely and are often used in walk-in rooms. Decide the door style before finalising drawer widths, not after.

Where a project mixes materials — glass fronts with timber carcasses, for example — the Glass Modular Wardrobes and Combination Modular Wardrobes pages show how those combinations are handled within the same modular family.

Coordination Across the Rest of the Joinery Package

A wardrobe rarely sits alone. En-suite vanities, bedside joinery, TV walls and linen cabinets are usually specified together, and mismatched grain direction, panel thickness or handle detail across those items is what makes a bedroom look assembled rather than designed. Grouping the joinery with one supplier keeps carcass standards, finishes and hardware consistent across rooms.

Storage outside the bedroom follows the same made-to-measure logic — Santerson Drawer Units in the storage range are configured by dimension, layout and finish for bathroom projects, which makes it straightforward to repeat a drawer detail from the wardrobe into the en-suite.

Documents That Make the Quotation Comparable

When you request pricing on more than one supplier, send the same pack to each so the numbers can be compared honestly. At minimum:

  • Room elevations with finished levels and services marked;
  • A room-by-room schedule of module widths, heights and drawer counts;
  • The hardware list above, filled in;
  • Approved finish references and the sample you are working from;
  • Delivery address, access route and lift or stair dimensions.

Our custom and OEM service covers bespoke finishes and layouts alongside standard production, and project work is coordinated through design, manufacturing, logistics and installation — see Custom & OEM Service and the service overview. For multi-unit work, ask explicitly about minimum order quantities and whether every unit is measured individually or from a repeated type drawing.

A practical rule: if a quotation lists "wardrobe as per drawing" without drawer counts, runner specification and finish references, it is not yet comparable with another quotation. Get those four items in writing first.

Before You Sign the Order

The last check costs nothing and prevents most disputes. Ask for a signed production drawing showing every elevation, drawer stack, hardware item and finish code; confirm that dimensions on that drawing are the ones you measured; and agree in writing which party is responsible for site preparation, including floor level and wall packing.

SANTERSON is a China-based furniture and building materials manufacturer supplying custom fitted storage, cabinetry and interior fixtures for residential and hospitality projects worldwide. Send us your room elevations and drawer schedule and we will return production drawings, a specification sheet and a quotation. Contact: PHILLIP, +86-13928214007 (phone/WhatsApp), santerson@qq.com — or use the contact page.