A set of built-in wardrobes looks identical on a rendering long before the first drawer sticks or a panel edge lifts. When you are sourcing textured melamine wardrobes for villas, apartments or a hospitality fit-out, the deciding factor is rarely the sample board in front of you. It is whether the supplier behind it can hold your dimensions, your finish and your schedule from the drawing stage through to handover. The checks below are the ones worth putting to every shortlisted supplier before you sign anything.
1. Confirm the product is genuinely made to measure
Wardrobe failures usually start with measurement, not finish. A supplier that works from a fixed catalogue module will quote you around standard widths and depths, then ask your side to absorb the gaps at ceilings, skirting and door reveals. A project supplier works the other way round: they take the room, then build around it.
Ask specifically whether sizing is made-to-measure, whether the internal layout can be changed per room rather than repeated across every unit, and who produces the final dimensional drawings. On our own Textured Melamine Wardrobes we state made-to-measure sizing, material and finish options and a layout tailored to each project — and we still ask the buyer to confirm dimensions and selected specifications for every project before production. A supplier who never asks you to sign off dimensions is a supplier planning to argue about them later.
2. Test how far the finish range actually goes
"Textured melamine" covers a wide field of surfaces: fine grain, wood-effect, matte, gloss and combinations of the two in a single run. A supplier who can only offer one texture will push your design toward what they already make.
Request physical samples in the exact finishes you are specifying, not a laminated brochure sheet, and check them against the surrounding joinery under site lighting. For comparison, look at how the wider melamine wardrobe range is organised — matte finish, wood grain and two-tone variants sit in the same family, which is a sign that finishes are being developed as a system rather than sold one at a time.
3. Check what custom and OEM support really means
Many suppliers describe themselves as custom but only vary colour. Real custom capability shows up in the questions they ask: substrate, edge treatment, hardware specification, door type, interior fittings, and whether a prototype or first article is produced before the full run.
Our custom furniture design and prototyping service covers bespoke finishes and textures, OEM furniture manufacturing, flexible minimum order quantities and brand customisation. Whatever supplier you are assessing, ask them to name the stages they control — modelling, prototyping, material selection, production — and to tell you plainly which details they cannot change.
4. Ask how specifications are confirmed and recorded
Wardrobe disputes are usually documentation disputes. Before an order is released there should be a drawing pack with room-by-room elevations, a written specification of finish and hardware, and a dated confirmation from your side. During production there should be a quality-control step, and at packing a list that ties each crate to a room so the site team knows what opens where.
A supplier running projects across multiple countries will already have this paperwork as routine. Ours sits inside the one-stop furniture and building materials supplier model: design consultation and space planning, material selection, product specification, manufacturing with quality control, project management and site coordination, then final installation and handover.
5. Verify the delivery chain reaches your site
Wardrobes are heavy, oversized and easily damaged at the corners. Freight arrangements matter as much as the panel itself. Ask which modes are used, who prepares customs documents, how panels are packed and protected, whether container loading is planned against a drawing of the room sequence, and what happens if a component arrives chipped.
Our furniture logistics and door-to-door delivery service covers freight forwarding by sea, air and rail, customs paperwork, packaging and container loading, shipment tracking and delivery to site. Treat any supplier's stated coverage as something to confirm for your specific destination, port and import conditions rather than as a guaranteed service level.
6. Pin down installation and after-sales before ordering
Built-in wardrobes are only finished when they are level, scribed to the wall and working smoothly. Ask whether on-site installation is provided or supervised, who inspects for snags at handover, what warranty applies and how spare parts such as hinges, runners and replacement doors are supplied years later.
Our furniture installation and after-sales support covers on-site installation, inspection and snag lists, warranty coverage, spare parts and replacement, and ongoing maintenance. Response times and warranty terms vary by project, so have them written into your order rather than assumed from a web page.
7. Look for comparable projects, not general praise
Ask for completed work of the same type: fitted bedroom joinery in villas or residential apartments, ideally with the drawings and the finished photographs side by side. We publish Australian villa furniture project records including villa work in Willoughby, Perth and North Turramurra, plus renovated villas in Melbourne and Sydney; those pages show scope and finish quality far better than a testimonial does.
A shortlist you can put to any supplier
- Will you produce room-by-room dimensional drawings, and will I sign them off before production?
- Which textured melamine finishes can you supply in physical samples, and can two finishes be combined in one run?
- What parts of the design are fixed, and what can genuinely be changed — layout, hardware, edges, door type?
- Is a prototype or first article produced before the full order is released?
- How are panels packed, which freight mode do you use, and who handles customs clearance?
- Who installs or supervises installation, and what happens if a panel arrives damaged?
- What warranty applies, and how long can replacement doors and hardware be ordered?
Work through those seven checks and the difference between suppliers becomes obvious quickly. If you would like your drawings assessed against our melamine wardrobe range, contact SANTERSON and we will confirm dimensions, finishes and specification with you before anything goes into production.