A two-tone kitchen scheme looks simple on a mood board and complicated on a quotation sheet. The same “two colour” request can mean different panel materials, different door profiles and very different prices once the finish, the carcass and the hardware are separated.
Before you send an enquiry about Two Tone European Cabinets, collect six things: your measured drawings, the split between upper and lower zones, the door style and handle decision, the finish family for each zone, the appliance list with cut-out sizes, and the delivery terms for the site. With those in hand, a manufacturer can quote from the same brief you are working to.
Start With the Room, Not the Colour
Our Two Tone European Cabinets sit in the Modern European Kitchen Cabinet collection and are built for residential kitchen projects, with finish, layout and dimensions specified per project. That means the first document a supplier needs is not a Pinterest board — it is a plan.
Send a dimensioned floor plan and elevations of the wall runs: overall length of each run, wall heights, and the position of doors, windows, radiators and existing services. Note ceiling height where tall units or a full-height pantry are planned, and mark anything that cannot move — a soil stack, a flue, a structural column. If you have already chosen worktop depth or splashback material, say so, because those dimensions drive the carcass heights and the scribe details.
If no drawings exist yet, tell the supplier that too. SANTERSON lists interior design services covering space layout planning, concept design, furniture layouts and 3D visual renderings, plus production coordination and on-site guidance, so a measured site survey can be the starting point instead of a finished set of shop drawings.
Decide Where the Two Colours Actually Split
“Two tone” describes an arrangement, not a single detail. Before requesting a quotation, fix which zones carry which colour:
- Upper versus lower. The most common split — lighter uppers, deeper lowers — and the easiest to price, because both runs share one door style.
- Tall units versus perimeter. An island or a bank of tall units in a wood-look finish against a plain perimeter. This changes panel quantities more than most buyers expect.
- Frame versus infill. A coloured frame with a contrasting panel reads differently from a flat two-colour door, and the profile cost follows.
A worked example from our catalogue helps to make this concrete: Two Tone Wood & White Modern Kitchen Cabinets pairs natural wood grain with matte white panels, and adds glass cabinets with built-in warm LED strips, a reserved space for a built-in refrigerator and oven, and a marble-vein stone backsplash. Naming the arrangement you want — including whether lit glass display units belong in the scheme — lets the supplier quote the same specification twice.
Name the Door Style and the Handle Decision
Within the Modern European Kitchen Cabinet collection, several related products differ mainly in profile and edge detail: Handleless European Cabinets, Flat Panel European Cabinets, Matte European Cabinets and High Gloss European Cabinets. A handleless run needs integrated profiles, a clearance plan at tall units and a decision on how the top of a handleless run is closed off; a flat panel slab does not. Quote both options if you are undecided — the difference shows up in the hardware schedule, not only in the door price.
Specify the Finish Family for Each Zone
Two colours means two finish specifications. Say which surface family each zone is drawn from, and how many shades are involved. The catalogue groups European-style cabinetry by finish — matte, high gloss, wood veneer — and the wider kitchen range carries matching two-tone variants such as Two Tone Acrylic Cabinets, Two Tone Melamine Cabinets and Two Tone Veneer Cabinets.
Then state the practical constraints: whether the darker zone sits next to an oven vent or a splashback that will be wiped daily, and whether you want a single continuous colour across tall units and lowers. Ask for physical samples of both shades before you sign off; two colours on one screen rarely match two colours in a room.
Send the Appliance and Hardware Schedule
Cabinetry is dimensioned around the appliances. Provide model numbers or, at minimum, the cut-out sizes for the oven, hob, extractor, refrigerator, dishwasher and any wine cabinet, together with the ventilation route for the hob. For our Custom Built-in Kitchen Cabinets, supplied as interior fixtures for hotel, apartment and residential renovation projects, we offer customisable sizes, panel materials and surface finishes with matching cabinet hardware — hinges, drawer slide rails, support legs and connecting brackets. Confirm on the enquiry which hardware you want supplied and which you will fit locally, because a mixed supply changes both the packing list and the installation sequence.
Agree Delivery Terms and Site Access
State the delivery address, the floor, lift dimensions or stair constraints, and the required arrival window. SANTERSON's logistics service covers global freight by sea, air and rail with customs paperwork, packaging and container loading, shipment tracking and door-to-door delivery; the installation and after-sales page lists on-site installation, inspection and snagging. Freight terms, duties, insurance and transit time are settled project by project, so put the destination and your preferred Incoterms in the first message rather than leaving them to the end.
What a Complete Enquiry Looks Like
| Item to send | Why the supplier needs it |
|---|---|
| Dimensioned floor plan and wall elevations, including ceiling heights and fixed services | Sets carcass sizes, scribe details and tall-unit heights |
| Written split of the two zones (uppers/lower, tall/perimeter, frame/infill) | Prevents three different readings of “two tone” |
| Door profile choice, plus handleless or handled | Drives profiles, clearances and hardware schedule |
| Finish family and shade count per zone, sample request | Fixes surface cost and avoids colour mismatch at handover |
| Appliance list with cut-outs; hardware split (supplied or local) | Reserves built-in spaces and defines the packing list |
| Delivery address, access route, preferred Incoterms, programme date | Allows a landed-cost quotation rather than an ex-factory number |
Questions Worth Asking in the First Message
- Which finish families are available for this door profile, and can both zones be supplied in the same batch?
- What is the made-to-measure tolerance on tall units and on the scribe to an uneven wall?
- Are lit glass display cabinets quoted as part of the run or as a separate item?
- How are panels protected for ocean freight, and how is damage recorded on arrival?
- What installation support is available at site, and what snag process follows fitting?
Two tone European cabinets fail in procurement for one ordinary reason: the buyer and the manufacturer are describing different specifications from the same two words. Send the drawings, the zone split, the profile, the finishes, the appliances and the delivery terms together, and the comparison becomes a straightforward one between quotations rather than an argument about what was meant.