High gloss melamine cabinets have a mirror-like front that makes a compact kitchen look brighter and a run of slab doors look sharper than it is. That reflectivity is also where the buying risk sits: fingerprints, edge banding, panel thickness and how the door meets the carcass are all decided on paper, long before the doors reach site. If you are ordering cabinetry for a villa, apartment or fit-out project, the questions below are the ones worth putting to your supplier before any drawing is signed off.

1. Which substrate carries the melamine face?

“Melamine” describes the decorative paper surface pressed onto a board, not the board itself. The same glossy foil can be laminated to particleboard, MDF or plywood-based substrates, and those behave very differently around a sink run, a dishwasher housing or a humid climate. Ask your supplier to name the substrate for door panels, carcass panels and shelf boards separately, and to confirm which panels are moisture-resistant where splashing and steam are expected.

Our High Gloss Melamine Cabinets are made to measure, so substrate, panel thickness and finish are specified per project rather than fixed to one stock size.

2. How is the edge finished?

On a glossy door you will see the edge before you see the face. Ask what edge banding material is used, how thick it is, and whether the joint is visible at the corner. Poorly bonded edges lift where hands, cloths and moisture work them daily, and no amount of cleaning restores a lifted edge. Also ask how the panel corners are treated — rounded or sharp — because sharp corners on a busy kitchen island chip quickly.

3. What is the gloss level, and will it match across the order?

“High gloss” covers a wide range of reflectivity. A supplier can send you a large sample panel, viewed under your own lighting rather than in a showroom, so you can judge how much reflection and how much surface distortion you are accepting on a tall door. If part of the job is ordered in one batch and part later — common on staged projects — ask now whether a later batch will match the first, and get that stated in writing.

Where a project needs gloss balanced against soft-touch surfaces, Matte Melamine Cabinets are made in the same collection and can be combined on the same carcass system.

4. Which hardware is included, and who supplies it?

A cabinet quotation that lists only doors and panels hides most of the cost. Ask whether hinges, drawer slides, handles or integrated pull rails, legs, brackets and any integrated lighting are included, which brand and grade they are, and whether soft-close is standard or an upcharge. Hardware also drives door alignment over years of use, so confirm what replacement parts are available and how they are ordered.

5. Who measures, and who signs off the drawings?

Gloss slab doors expose an out-of-square wall more than a framed door does. Ask whether site measurement is done by your team or ours, how tolerances are handled on uneven floors and ceilings, and what happens if a panel is a few millimetres off after installation. Confirm that appliance positions, services, splashback boundaries and skirting returns appear on the shop drawing before production starts.

6. How will it be packed, shipped and received?

Gloss panels are usually shipped flat-packed with protective film between faces. Ask about the packing standard, how tall door panels are protected in transit, whether the shipment is container-loaded with your other fit-out items, and who handles customs paperwork and delivery to site. Getting panels to the wrong level of a building is an expensive problem, so confirm the delivery address, lift access and receiving hours at the same time as the freight terms.

7. What happens after installation?

Ask what the warranty covers for panels, edges and hardware, how claims are raised, and whether spare doors or panels can be reordered to the same specification years later. Also ask for the cleaning recommendation before handover — glossy surfaces mark easily, and the wrong cleaner leaves haze that residents blame on the product.

How SANTERSON handles cabinetry orders

SANTERSON has been manufacturing furniture and building materials in China since 2008, supplying custom cabinetry along with the flooring, lighting, wall finishes and joinery that surround it. For cabinet enquiries we work from your drawings or a site brief: dimensions, door style, substrate and finish are set per project, hardware is matched to the specification, and freight, installation guidance and after-sales support follow through to handover. Our custom built-in kitchen cabinets cover hotel, apartment and residential work, with layout, sizes, door styles and surface finishes specified to the project.

Before you place the order

Send your layout or a set of room dimensions, tell us which surfaces need to resist moisture and heavy handling, and ask for a sample panel in the exact finish you are considering. A short specification review at that stage settles substrate, edge detail, hardware and tolerance questions while they are still cheap to change.

Talk to us about your project — phone or WhatsApp +86-13928214007, email santerson@qq.com, or through our contact page.