A wall cabinet with an arched niche looks simple on a mood board and complicated on site. Before you send an enquiry to a custom furniture manufacturer, having the drawings, dimensions, material direction and finish samples ready turns a vague quote request into a priced, buildable package. The same preparation is what keeps arches, integrated wardrobes and vanity tops consistent from the first render to the final installation.
Start With the Wall, Not the Style
Arched work is unforgiving of rough numbers. Before contacting a supplier, record each wall the cabinetry will occupy: overall length, clear height, and whether that height is constant along the run. Older villas and renovated apartments rarely have level floors or square corners, so note the highest and lowest floor points and any out-of-plumb corner you already know about.
Then mark the fixed conditions the cabinet has to work around:
- Power outlets, switches, data points and light switches that will sit behind or inside the joinery.
- Recessed downlights, cove lighting positions and any existing wiring route for built-in LED strips in the niche.
- Radiators, pipes, air-conditioning diffusers, window reveals and door swings that limit cabinet depth.
- Skirting profile and ceiling cornice, which decide whether the arch can run full height or needs a header.
- Floor finish thickness if the flooring is not yet laid, because it changes the finished overall height.
Send photographs from several angles plus a simple dimensioned sketch. If drawings exist, send the architectural or interior layout in PDF and mark the room name on every sheet; that single habit prevents most early misreads.
Decide What the Arched Niche Is Actually For
An arch can be a shallow display recess, a deep niche with floating shelves, or a full-height feature that frames a wardrobe. Each has different construction and cost. Write down what you intend to place inside: ceramics and artworks, books, glassware, plants, a mirror, a TV. That answer drives shelf spans, load capacity, lighting position and the depth of the reveal.
- Arch geometry: segmental, semicircular or pointed; the radius, and whether the arch is structural framing or an applied moulded profile over a flat panel.
- Niche depth and reveal: shallow for display objects, deeper for layered shelving; state the finished internal depth you want.
- Lighting: concealed LED tape in the head or sill of the niche, warm or neutral colour temperature, and where the driver may be hidden for servicing.
- Shelving: floating shelves, glass shelves with standoffs, or solid timber boards matching the carcass.
Our Arched Niche & Full House Custom Wall Cabinet Project shows how these decisions combine in one wall: an arched niche with built-in LED lighting used as a display shelf for artworks and decorative ceramics, layered floating shelves above it, and a full-height seamless wardrobe beside it with flush wood grain panels. Related options include niche shelving, custom niche paneling and open display niches in integrated storage walls.
Specify the Storage Layout Before Quotation
Full-height hidden wardrobes and integrated vanities are where a wall cabinet stops being furniture and becomes fit-out. List what has to be stored, in rough quantities: hanging length for short garments versus long garments, drawer count, linen storage, suitcases, luggage height, ironing space, or a dressing table position. A supplier can only proportion the interior once it knows what goes inside.
| Zone | Details to send with the enquiry |
|---|---|
| Bedroom wall wardrobe | Door type (hinged, sliding, pocket or flush-aligned), number of doors, handle preference such as pull-free routed edges, hanging heights, shelf and drawer split, whether the top is sealed to ceiling. |
| Integrated vanity | Basin type and tapware holes, mirror or arched textured glass position, drawer configuration, countertop material and edge profile, splashback return. |
| Bathroom countertop | Single or double sink layout, cut-out positions, overhang, and the stone slab you want, with a slab photograph or name from your stone supplier. |
| Living and entrance | Sideboard length, floating shelf spans, appliance positions such as coffee machine, closed versus open ratio. |
For a whole-house package, keep one schedule per room so prices stay comparable across the joinery. A comparable approach appears in our Custom Mid-century Modern Whole House Custom Furniture Project, where entrance storage, living room sideboard, bedroom wardrobe and integrated bay window seating were designed as one set with consistent wood tones and pull-free handles.
Bring Material and Finish Direction, With Tolerances
Wood grain direction, sheen level and colour are the three most common sources of disappointment. State the panel material you want the factory to work with — engineered board, veneer, lacquer, acrylic or melamine — and confirm whether the arch profile will be wrapped in the same material as the doors, because a mismatch is obvious under side lighting.
- Send a physical or photographed finish reference: a sample board, an existing cabinet door, or the flooring you are matching. Our custom furniture materials and finishes service covers bespoke finishes, textures and OEM requirements.
- Name the sheen explicitly (matte, satin, high gloss) and ask how the finish behaves on a curved arch face versus a flat door.
- For stone, supply slab photographs with the veining direction you want at the vanity; natural green marble, for example, varies block to block, so confirm the cut before fabrication.
- Decide edge treatment: solid wood edge banding, matching ABS, or a wrapped edge on curved components.
Ask for a sample door or a small arch section before mass production if the project carries several rooms. It is the cheapest way to settle grain, colour and radius questions while changes are still inexpensive.
Agree the Process and Who Does What on Site
Custom wall cabinetry fails most often at the interface, not in the workshop. Clarify in writing which party handles site measurement, wall preparation, electrical first-fix for niche lighting, stone templating, delivery to level, and final installation. Our one-stop furniture and building materials supplier scope runs from design consultation and space planning through material selection, manufacturing quality control, project management and site coordination to handover.
- Measurement: confirm who measures and when — ideally after flooring and plasterboard are complete, or with written tolerance allowances if earlier.
- Drawings: request dimensioned elevations plus interior layout details, not just a 3D perspective. Approve them in writing.
- Delivery: discuss packing, container or parcel loading and the delivery address for villas and multi-storey sites; freight options are covered under furniture logistics and door-to-door delivery.
- Installation: confirm on-site fitting, snag inspection and what happens to panels damaged in transit; see furniture installation and after-sales support.
- Sequencing: agree which trades must be finished before the joinery arrives, especially painters, electricians and tilers.
For villa and hospitality packages that combine joinery with other fit-out items, turnkey interior project solutions let one supplier coordinate cabinetry alongside bathroom fixtures, lighting, flooring and wall finishes on a single programme.
Questions Worth Asking Before You Commit
- How is the arch framed — bent ply, CNC-cut frame, or solid timber lamination — and how is it finished on the convex face?
- What tolerance do you allow for wall movement, and how are scribes and trims handled against plasterboard?
- Can the niche lighting driver be reached without removing the arch lining?
- Which components ship assembled and which are flat-packed, and what fixings are supplied for masonry versus timber framing?
- What is replaced if a panel arrives chipped, and how quickly can a replacement panel be produced for the same batch colour?
Frequently Asked Questions
Do I need an architect's drawing before requesting a quote?
No. A dimensioned sketch with photographs is enough to start. If architectural or interior drawings exist, send them as well; otherwise the factory can begin with site measurement and produce 3D proposals for your approval.
Can one supplier build the niche, wardrobe and bathroom vanity together?
Yes, and that is usually preferable. Producing them in one batch keeps wood grain, colour and hardware consistent, and simplifies delivery and installation scheduling.
When should the arched niche lighting be decided?
Before drawings are approved. Wiring, driver location and heat relief affect the framing of the arch head, so late changes mean re-making components rather than moving a cable.
What if my floor is not level along the wall?
Send the measured high and low points. The design can then use a scribed base or concealed packing, and the arch radius stays visually correct instead of following the floor.