A carpet order for a guest room or a villa bedroom rarely fails at the point of weaving. It fails in the paperwork before production: a pattern scaled for a ballroom printed at corridor width, a dye lot approved on a screen instead of a physical sample, an underlay left out of the quotation, a stair nosing nobody specified. If you are specifying a custom blue grey ink pattern carpet for a hotel guest room or villa, the checklist below covers every decision that has to be closed before the loom starts, so the sample you approve and the roll that arrives in the building are the same product.

1. Scope: which rooms, and how many of them

Start with a room-by-room schedule rather than a single total area. Guest room carpet is ordered by room type, not by the building: a standard room, a suite and a villa bedroom carry different furniture layouts, different traffic paths and often different headboard walls. Write down for each room type the number of keys or bedrooms, whether the carpet is wall-to-wall or a fitted rug with skirting gaps, and whether corridors, stairs and lift lobbies share the same design.

This schedule drives everything else. Roll widths, repeat sizes and waste allowances are all worked out against it, and a change made after production has started is far more expensive than a change made now.

2. Pattern and scale: the item most checklists miss

An ink-wash design reads completely differently at 1 m across a chair seat than across a 30 m² room. Ask for the pattern repeat in centimetres, not as a photograph, and confirm how the design is scaled to your room width. For a guest-room programme where dozens of identical rooms are carpeted, also confirm whether the pattern is cut to match at the door threshold or butted room by room.

  • Pattern repeat dimensions and the scale option you have chosen for each space
  • Which direction the design runs relative to the bed headboard and the entry door
  • How seams are handled: hidden seam, visible join, or a design that hides joins inside the motif
  • Whether borders, inset bands or a matching stair runner belong to the same design family

3. Colour: approval on paper, not on screen

Blue-grey is a deceptively narrow band. Shifted slightly blue it reads cold and corporate; shifted slightly grey it disappears under warm guest-room lighting. Request physical samples in the actual room, viewed at day and under the lamps you are installing, and record the approved sample with a reference number that appears on both your purchase order and the production paperwork.

  • Physical sample or swatch approved before production, signed off by the designer or owner
  • Sample reference recorded on the order, so reorders and top-ups match
  • Dye-lot policy for phased deliveries — if rooms are carpeted in stages, all lots should be planned together
  • Lighting check: how the same pile looks under 2700 K bedside light versus corridor lighting

SANTERSON supplies samples before production on its bespoke carpet programmes, which is the point in the process where colour, pattern scale and handle are settled — treat it as a formal approval stage with a named signatory, not a courtesy.

4. Fibre, construction and pile: matched to traffic, not to a catalogue

Guest rooms and private villas sit at opposite ends of the same problem. A hotel floor is cleaned on a cycle, moved furniture scuffs the pile, and the same room type repeats fifty times over; a villa bedroom is quieter but judged far more closely up close. Specify the fibre blend, the construction method and the pile height against that reality. Blends are configurable on a bespoke order, so state what matters to you — resilience under trolley wheels, softness underfoot, colour retention, ease of spot-cleaning — and let the specification follow.

  • Fibre blend and construction (tufted or woven) recorded on the order
  • Pile height and total weight, chosen for the traffic level of each space
  • Backing and secondary backing as stated by the manufacturer
  • Underlay and gripper/edge details quoted separately or included — decide which
  • Transition strips at thresholds, and how carpet meets engineered timber or stone flooring

For spaces beyond the guest room, the same design language usually has to continue into a larger area. Our customizable commercial carpet for hotel, banquet hall and villa projects is made to project size, colour, pattern and fibre blend, which keeps the public areas consistent with the rooms above.

5. Sizes, cutting layout and waste allowance

Send a dimensioned floor plan for each room type, including the alcoves, wardrobe reveals and door swings. Ask the supplier to return a cutting layout showing roll direction, seam positions and the waste allowance they have assumed, then check that allowance against your own schedule before you sign. Offcuts from guest-room cuts are worth planning for in advance: they can become corridor runners, lobby insets or closet carpet rather than scrap.

6. Fire performance and project documentation

This is where a checklist earns its keep. Requirement differs by country and by building classification, so state the standard your project must satisfy and ask which test reports the manufacturer holds for that specific construction — not for a similar one. Ask in writing what comes with the shipment: test certificates, declarations of performance, installation instructions and a maintenance guide. For an export order these documents also sit alongside the commercial invoice, packing list and certificate of origin, and a missing certificate at customs stops a container that a warehouse would otherwise have cleared.

We do not claim compliance with a particular national standard in advance of your project. Tell us the classification and the testing your specifier requires, and we confirm what is available for the exact construction you are ordering.

7. Sampling, prototyping and approval stages

Write the approval route into the programme: sample issued, comment returned, revised sample if needed, production release. For a patterned carpet the useful test is a sample large enough to show one full repeat, laid on the floor rather than held in the hand. Agree who signs each stage and how long comments take — a slow client-side approval moves the delivery date as surely as a slow mill.

8. MOQ, phasing and reorder policy

Confirm the minimum order for the construction you have chosen, and how trial or sample-floor orders are handled. Then plan the phasing: which rooms are carpeted first, whether a show suite is included, and how many keys are held for a later phase. Reorder terms matter more than buyers expect — pile batch, dye lot and pattern scale all have to match two years later when the last wing opens.

9. Packaging, freight and delivery sequence

Carpet is heavy, bulky and easily crushed, so packaging and loading belong on the checklist. Confirm how rolls are wrapped and protected, how they are loaded in the container, and which port or site address they are delivered to. For an international project, freight by sea, air or rail, customs paperwork and door-to-door delivery can be arranged through our logistics and door-to-door delivery service; agree Incoterms, insurance and the delivery sequence so the carpet arrives when the rooms are ready for it, not months earlier into a storage unit.

  • Roll weights and dimensions checked against site access, lifts and stair flights
  • Delivery address, dock restrictions and unloading arrangements confirmed
  • Storage plan on site: flat, dry, off the ground, away from direct light
  • Inspection window on arrival, with damage reported against the packing list

10. Installation, snagging and handover

Specify who installs. Carpet laid by a flooring subcontractor unfamiliar with the pattern repeat is where matched seams and straight borders are lost. Agree the setting-out drawing, the door-threshold details, and the order of works relative to painting, joinery and furniture delivery. Then walk the snag list room by room: seams, borders, transitions, and any roll that shows a shading difference from the approved sample.

Our installation and after-sales support covers on-site installation, inspection and snagging, spare parts and ongoing maintenance. Confirm in writing which of these apply to your project, for what period, and what is excluded — the same goes for warranty terms, which should be read against the cleaning regime your housekeeping team will actually run.

11. Cleaning regime and life-cycle cost

Ask what the carpet needs before you sign: recommended cleaning method, spot-clean limits for common stains, protective padding under furniture legs, and rotation or replacement intervals for high-traffic rooms. A guest-room carpet quoted at a low rate per square metre but needing early replacement in the corridor ends up more expensive than one specified correctly from the start. Get the maintenance guide as part of the handover pack, and price the spares you want held on site.

12. Single point of coordination across the fit-out

A carpet decision touches lighting colour temperature, skirting and door thresholds, engineered timber transitions and furniture delivery dates. Where one supplier carries the furniture and the building finishes as well, those interfaces are settled inside one team instead of across several contracts. SANTERSON works as a one-stop furniture and building materials supplier, taking hospitality and villa projects from design and material selection through production, logistics, installation and after-sales under turnkey solutions for villas, hospitality and offices.

If your specification calls for a made-to-order piece rather than a catalogue item, our custom & OEM service handles bespoke sizes, colours, material blends and finishing, with flexible minimum order quantities for trial phases.

The checklist in one place

  • Room-by-room schedule: keys per room type, wall-to-wall or fitted rug, shared design for corridors and stairs
  • Pattern repeat, scale per space, seam strategy and threshold treatment
  • Physical sample approved in situ, reference recorded on the order
  • Fibre blend, construction, pile height, backing, underlay and transitions specified per traffic level
  • Dimensioned plans returned as a cutting layout with an agreed waste allowance
  • Fire standard stated by you; test reports confirmed for the exact construction ordered
  • Written approval route: sample, comments, revision, production release
  • MOQ, phasing and reorder terms including dye-lot matching for later phases
  • Packaging, container loading, Incoterms, insurance and delivery sequence agreed
  • Installer named, setting-out drawing issued, snag list walked room by room
  • Cleaning regime, maintenance guide and on-site spares defined before handover
  • Interfaces with lighting, joinery, flooring and furniture assigned to one coordinator
Send us the room schedule, floor plans and the fire standard your project must meet, and we will return a specification for the blue grey ink pattern carpet — fibre blend, construction, pattern scale, sample plan and delivered price — so every line of the checklist closes before production starts.

Questions buyers ask at this stage

Can the ink-wash design be scaled down for a small villa bedroom? Yes. The design is made to order, so the repeat can be resized to suit the room; send the plan and we confirm the scale that keeps the motif legible at the viewing distance.

Can I order one guest room before committing to a whole floor? Trial quantities are discussed per construction. Confirm the minimum order for the blend you have chosen, then plan the show suite and the first phase together so both come from the same batch.

What documents arrive with an export shipment? Commercial invoice, packing list and certificate of origin travel with the goods; test certificates and installation or maintenance guidance are arranged according to what your project requires. Ask for them at order stage rather than at the port.