A floating shelf looks like the easiest item on a joinery schedule and then turns into the hardest line to sign off. Nothing is holding it up in front of you, so the load path, the fixing detail and the board thickness are all hidden inside the wall. When that detail is wrong you find out after handover, usually with something heavy on the floor underneath it.
Shortlisting the right manufacturer matters more than shortlisting the shelf itself, because open shelving in a villa, hotel or apartment fit-out is made to measure rather than picked from a catalogue. The steps below are how we would narrow a long list down to two or three suppliers worth quoting, and what each answer tells you about how the rest of the package will be handled.
Start with scope, not samples
Before you contact anyone, write down what you actually need in a single paragraph. Suppliers reply to a clear brief with real information; they reply to a vague one with a brochure.
- Where the shelves sit — bathroom, living room, study, lobby or guest room — because wall build-up and moisture exposure change the specification.
- What has to sit on them: towels and glassware, books, artwork, or equipment. This drives board span, thickness and the concealed bracket.
- Whether the shelf is a stand-alone piece or part of a wider wall, such as floating modular shelves combined with closed units.
- Finish intent — matching adjacent cabinetry, veneer or lacquer, and whether the underside and return edges will be visible from below.
- Quantities and the number of different sizes. A run of forty identical shelves behaves very differently in price and lead time from forty unique ones.
Send the same brief to every candidate. Comparing like with like is the only way a shortlist means anything.
Screen one: can they make it to your dimensions?
Ask directly whether sizing, material and finish are specified per project or limited to fixed sizes. Standard-size shelving is fine for a single replacement; it is the wrong answer across a multi-unit project where reveal heights have to line up with panelling, doors and tiling.
A supplier working from drawings will ask for your dimensions, wall make-up and reference photos before quoting. One who quotes from a picture alone has not engaged with the problem yet.
Screen two: how they handle load and fixing
This is the question that separates manufacturers from traders. Ask three things in writing:
- What bracket or hidden support system they use, and what span it carries at your board thickness.
- How they expect the shelf to be fixed to your specific wall — solid substrate, timber stud, steel stud or cavity block — and whether they supply a fixing detail for that condition.
- Whether they state an intended loading for each configuration, or leave it open.
For metal-frame shelving in wet areas the same questions apply with moisture added: what the frame material is, how it is finished, and whether the fixing method suits a tiled substrate. Confirm the specification for the exact configuration rather than assuming the range behaves uniformly.
Screen three: proof of comparable project work
Ask for photographs and drawings of shelving they have supplied on projects of your type — hospitality, villa, or multi-unit residential. You are looking for two things: whether the detailing around returns, skirting and reveals is resolved, and whether they can show a coordinated package rather than isolated items.
Project evidence also tells you how they communicate on site. A supplier who can produce shop drawings, packing lists by room or location, and installation notes has run projects before. One who cannot will add cost to your team in coordination time.
Screen four: coordination across the rest of the fit-out
Open shelving rarely stands alone. It has to match cabinetry, wall panelling, doors and vanities in colour, grain and edge profile. Buying shelves from one supplier and everything else from another is where mismatches appear.
Shortlist suppliers who can cover adjacent work under the same specification. A floating shelf ordered alongside the bathroom vanities, wardrobes and wall panelling it sits against comes from one set of samples, one production run and one packing schedule. Integrated lighting over the shelf, and shelving accessories such as rails and dividers, are easier to resolve when the same factory is drawing both.
Practical test: ask each candidate to confirm that the shelf finish will be produced from the same batch and process as the cabinetry they are quoting for the same rooms. Watch whether they say yes immediately or need to check with production.
Screen five: what happens after the shelf leaves the factory
Ask about packaging and protection for transit, whether concealed brackets ship with the boards or separately, and how replacements are handled if a board is damaged on site. Then ask who installs — their own team, your contractor, or guidance to your contractor.
For overseas manufacturing, also confirm freight arrangements, documentation, and how discrepancies are raised once goods arrive. Getting these answers before award avoids renegotiating afterwards.
Score the shortlist on the same sheet
Put every candidate into one table and fill it in from their written replies, not from sales calls. Three finalists at the end of this exercise is a good outcome.
| Criterion | What a strong answer looks like |
|---|---|
| Made-to-measure sizing | Dimensions, material and finish specified per project; asks for your drawings |
| Load and fixing detail | States bracket type, span and intended loading; addresses your wall condition |
| Project references | Comparable hospitality, villa or residential work with drawings, not just photos |
| Finish coordination | Same samples and production as the cabinetry and panelling in those rooms |
| Delivery and support | Transit packaging, replacement route, installation responsibility all stated up front |
| Responsiveness | Written answers to technical questions within the timeframe they promised |
Two mistakes to avoid
The first is shortlisting on price alone. Floating shelves are a small share of a fit-out budget, and the cheapest quotation usually transfers the engineering risk to your site team.
The second is treating one sample as proof. A single shelf photographed in a factory tells you nothing about how forty units will be packed, labelled and delivered across a building. Judge the process, then order the sample.
SANTERSON has manufactured furniture and building materials since 2008 and supplies made-to-measure open shelving, modular wall systems, cabinetry, vanities and panelling for villa, hospitality and office projects, with custom/OEM production, door-to-door logistics and installation support. Send us your dimensions, wall conditions and finish intent and we will quote the shelving against the rest of the package.