Ribbed glass has become one of the easiest ways to add texture to a bedroom built-in without introducing a heavy colour or a busy pattern. The vertical fluting diffuses light, softens what is stored behind the door and keeps a wardrobe front reading as part of the wall rather than as a separate piece of furniture. Because our Ribbed Glass Wardrobes are made to measure for each project, the decisions that decide the finished result are all taken before production starts. The list below is the one we work through with architects, contractors and homeowners so that a ribbed glass wardrobe front arrives on site exactly as drawn.

1. Confirm the opening dimensions in the finished condition

A made-to-measure wardrobe is only as accurate as the dimension it is taken from. Before we cut anything, we need the opening measured after the floor covering, skirting, plaster and ceiling finish are in place — not from a structural drawing. Wardrobe fronts that run floor to ceiling are unforgiving: a few millimetres of screed or a thicker underlay changes the height, and a sliding front needs clear running space at both head and sill.

Send us the width, height and depth of each opening, together with the position of columns, beams, radiators, switch plates, door architraves and any ceiling recess. Where two wardrobe runs meet a corner or an angled wall, a simple sketch with the angles marked lets us propose a layout instead of guessing at it.

2. Choose the operating system before you choose the glass

The door mechanism drives everything else: panel weight, track loading, the clearance needed in front of the opening and the size of each leaf. Sliding fronts save the swing radius that hinged doors need, which is why Glass Sliding Door Wardrobes are usually the right answer for a narrow bedroom or a hotel room where the bed sits close to the storage wall. Hinged fronts give full access to the interior at once and work better where the opening is shallow or where a single unbroken view of the contents matters.

Decision pointWhat we need from you
Sliding or hingedClearance in front of the opening; how often the interior is accessed
Number and width of leavesOpening width, plus where you want the vertical joints to fall
Frame around the glassFrameless edge, timber or board edge, or an aluminium frame such as our Aluminum Frame Glass Wardrobes
Handles and hardwareProfile, finish and whether handles are recessed into the leaf

3. Fix the glass specification in writing

"Ribbed glass" covers a range of surfaces, and two samples that look similar on a sample card can behave very differently across a full-height door. Specify the pattern by name or approved sample, and state which face the fluting is applied to. Also confirm whether the ribbed glass is used clear — so clothes remain visible as soft shapes — or paired with a translucent backing such as frosted glass for a fully screened front. Our Frosted Glass Wardrobes show how a translucent panel solves the privacy side of that question, and some projects combine both: ribbed glass on the outer leaf, a solid or frosted panel behind it.

Tint is the other variable. Clear, bronze and grey tints all change how the fluting reads against a warm or cool interior palette, so we match the tint to the room's lighting rather than picking it from a catalogue page.

Approve a full-scale sample, not a postcard-sized offcut. A ribbed pattern only shows its real character when light travels along it at door height, and a small chip will hide both the tint shift and how much of the interior you can actually see.

4. Confirm the interior layout and storage plan

The glass is the visible part; the carcass inside determines whether the wardrobe works. Before production we agree the split between hanging rails, shelves, drawers and open display niches, and the heights of each rail for long garments and short garments. Where a project needs a defined storage layout rather than a standard box, our Glass Modular Wardrobes are configured around that plan — drawer-focused, shelf-focused or a combination.

Confirm the load-bearing points too. Glass-fronted leaves carry more weight than a board front, so the top track and any wall fixing must be fixed to a substrate that can take the load. If the wall is a partition or a clad surface, tell us at the survey stage so we can design in a support frame rather than discover it on installation day.

5. Agree finishes, branding and material substitutions

Our Custom & OEM service covers bespoke finishes and textures, prototyping and 3D modelling, so a wardrobe carcass can be matched to the joinery already specified for the project — the same veneer as the doors, the same lacquer as the kitchen, the same handle family throughout. For hotel and apartment schemes this is where a single wardrobe detail becomes a repeatable standard across many rooms.

Ask us in writing which parts are fixed and which can be substituted. Board substrate, edge treatment, hinge brand and runner series are often interchangeable; the visible glass pattern and finish are not. Agreeing that boundary early prevents a value-engineering conversation from changing something you specified deliberately.

6. Confirm delivery, handling and site readiness

Full-height glass leaves need a route to the room that is as considered as the product itself. Stair widths, lift dimensions, turning spaces at corners and the final floor level all affect whether a leaf arrives intact — particularly on upper-floor apartments and villas. Our logistics covers freight by sea, air and rail with customs paperwork and door-to-door delivery, but the last stretch inside the building is a site matter, so we ask for access details and a nominated receiving contact before dispatch.

On site, confirm that painting, flooring and electrical first-fix are complete. Glass fronts installed before decoration tend to get damaged at the trades' next visit, and silicone or sealant applied over fresh paint will not hold cleanly.

7. Sign off the drawings and the inspection standard

The last step is a set of production drawings showing elevations, leaf sizes, glass pattern direction, hardware positions and interior layout, signed off by whoever holds the design authority on the project. Alongside them, agree how the goods will be checked on arrival — packaging condition, panel count, visible defects at an agreed viewing distance — so that any claim is settled with a checklist rather than an argument.

A quick pre-production checklist

Confirm all nine of these before a panel is cut:

  • Finished-level dimensions for every opening, including corners and recesses
  • Sliding or hinged system, leaf count and leaf widths
  • Glass pattern, tint, fluting face and whether a backing panel is used
  • Frame edge detail and hardware profile and finish
  • Interior layout with rail heights, shelf spans and drawer positions
  • Substrate behind the wall fixing, and any support frame required
  • Approved full-scale sample reference for glass and finish
  • Access route, receiving contact and site completion date
  • Signed production drawings and agreed arrival inspection standard

Send us the drawings, the finished-level dimensions and the finish references you have already chosen, and we will come back with a wardrobe proposal built around them — layout, glass specification and quotation confirmed before any panel is cut. That single confirmation step is what keeps a ribbed glass front looking like the detail drawing once it is standing in the room.