A freestanding open wardrobe is one of the easiest pieces to specify and one of the easiest to get wrong. There are no doors to argue about, so buyers often assume the job is simple and place the order from a photograph and an approximate width. That is exactly where rework starts: a unit that fouls a ceiling line, a hanging rail set at the wrong height, or a finish that does not sit with the joinery already made for the bedroom.
Before you confirm an order, work through the questions below. They are the same ones our project team needs answered to produce a made-to-measure wardrobe, so answering them early shortens the quotation cycle rather than delaying it.
Start with the room, not the product
Send the wall elevation first: overall width, floor-to-ceiling height, and where skirting, architraves, downlights, air-conditioning diffusers or curtain boxes intrude into the run. An open wardrobe shows its carcass, so a ceiling recess or an out-of-plumb wall that a door would have hidden becomes visible immediately.
Tell us whether the unit is freestanding against a wall, fitted into a niche, or part of a larger built-in run. A freestanding open wardrobe can be moved and is finished on all visible faces; a niche unit is usually fixed, packed out to the opening, and detailed to meet floor and ceiling finishes. Those two are not interchangeable, and the price follows the detail.
How will the wardrobe actually be used?
Open storage only works when the internal layout matches what you hang and fold. Before specifying shelf counts, confirm:
- How much long hanging (coats, dresses, robes) you need versus short hanging, and whether two stacked hanging zones suit the available height.
- Drawer count and depth — shallow for folded knitwear and accessories, deep for jumpers and linens.
- Shoe storage method: angled shelves, flat shelves, or a dedicated low bay.
- Whether you want display niches, lighting in the bays, or an island in front of the run.
Our Open Wardrobes collection is specified per project — made-to-measure sizing, material and finish options, and a layout tailored to the space. Related layouts in the same family include metal frame open wardrobes for a lighter, industrial look and open walk-in wardrobes where the storage runs along more than one wall. If you already know you want closed storage in some bays, say so at this stage: mixing open and closed sections changes panel thickness and edge detailing.
Which material and finish are you specifying?
With doors removed, the board and its edges carry the design. Ask which substrate is being quoted, what the edge treatment is on visible returns, and how the chosen finish behaves in your light. A veneer reads warm under warm lighting but can look heavy in a small room; a matte laminate photographs cleanly and is straightforward to wipe down.
Where the wardrobe has to match something already made — bedroom cabinetry, a media wall, or a door set — send the existing reference: product code, sample photograph, or physical sample. We are a custom furniture and interior products manufacturer, so colour matching, grain direction and handle-free detailing can be specified rather than approximated from a catalogue swatch.
What is fixed on site, and what ships flat?
Ask how the unit arrives. A tall wardrobe shipped as one assembled carcass may not pass through the doorway or up the stair of the room it belongs in. Confirm panel-by-panel supply with on-site assembly, or a pre-assembled section where access allows it, and check which is being quoted.
Then confirm wall fixing requirements. Open wardrobes need to be anchored where the design calls for it, and that depends on the substrate behind the unit. Get this confirmed with your builder before the order, not on delivery day — and share ceiling heights and floor finishes so skirting cuts and packers are resolved in the drawings.
How is the order quoted and checked?
A made-to-measure wardrobe should come back with shop drawings before production. Check those drawings for overall dimensions against your site survey, hanging rail heights, drawer stack positions, and which faces are finished. This is also the moment to confirm the specification in writing: dimensions and selected finishes for each project are confirmed before manufacture, so a change after sign-off is a variation rather than a tweak.
For buyers coordinating several rooms at once, it is worth asking whether the wardrobe can be ordered alongside the rest of the fit-out. Ordering wardrobes, kitchen cabinetry, doors and vanities through a one-stop furniture and building materials supplier means one set of drawings to reconcile, one production schedule, and one consolidated shipment instead of several deliveries arriving in different weeks.
What happens after it arrives?
Confirm who installs, who inspects, and what happens if a panel is damaged in transit. Our service scope covers logistics and door-to-door delivery, installation, and after-sales support including snag inspection and spare parts — details such as warranty terms and response times should be confirmed for your specific project and destination.
A short pre-order checklist
| Question to ask | What good looks like |
|---|---|
| Is the unit freestanding or built into a niche? | The supplier asks this before quoting, and prices the detail accordingly. |
| Have you sent a measured wall elevation? | Width, height, obstructions, floor and ceiling finishes all recorded. |
| Is the internal layout based on how you store clothes? | Hanging zones, drawer depths and shelf heights set from your own list. |
| Which finish, and how are visible edges handled? | Substrate, edge banding or solid edging, and finish sample confirmed. |
| How does it get into the room? | Delivery route checked; flat-pack versus assembled decided in writing. |
| Are shop drawings issued before production? | Drawings reviewed and signed off, with dimensions and finishes listed. |
| Who installs and inspects on completion? | Named responsibility for installation, snag list and replacement parts. |
If you can supply the measurements, the intended layout and the finish reference in one enquiry, we can come back with a specification and drawings you can check line by line. Send your wall elevations to start the process, and we will confirm dimensions and the selected finishes for your project before anything goes into production.