A quotation for luxury decorative 3D wall panel work usually arrives as a short table: a pattern name, a panel size, a unit price and a quantity. Two proposals that look almost identical on paper can produce very different results on site — one installs cleanly against a hotel lobby feature wall, the other ends in cut-off offcuts, visible joints and a claim for extra material. The difference is decided before production starts, by how completely the proposal answers the questions a commercial project actually raises.
Start with the wall, not the pattern
Sample boards tell you how a relief reads up close. They do not tell you how that relief behaves across twelve metres of lobby wall under recessed lighting, or beside a lift opening where the panel has to stop neatly. Before comparing prices, check what the proposal says about your drawings: room-by-room elevations, the run length of each feature wall, and the position of doors, skirting, cornices, switches and services.
A supplier working from proper elevations can tell you where a pattern will need to be trimmed, where an external or internal corner appears, and whether a reveal frame is the cleaner solution. A proposal built only on a total square-metre figure carries none of that information, and the gaps surface later as variations.
Elevations supplied for every panelled wall, with overall run dimensions Panel layout marked on those drawings, including joint positions Openings, corners and ceiling lines shown as fixed constraints
Read the specification line by line
Commercial interiors are hard on wall finishes. A lobby feature wall takes luggage impact; a restaurant wall takes chair backs, cleaning and humidity from an open kitchen; a corridor in a serviced apartment is cleaned far more often than a bedroom. The product page for this panel range describes it as lightweight, easy to cut and install, with moisture and impact resistance for long-term use, and applied in hotel lobbies, restaurants, offices and villas. Those are the properties worth pinning down in writing, because they determine whether the wall still looks right after two years of service.
Panel thickness, relief depth and overall module size, stated as numbers Surface finish, colour code and how it is cleaned in daily housekeeping Moisture and impact behaviour confirmed for the specific room, not the catalogue in general Substrate and fixing method, and whether the background wall needs preparation first
Where a project also calls for metal cladding or ceiling linings in the same storey, it is worth reviewing aluminium honeycomb panel for building exterior and interior wall cladding at the same time. Different materials meet at reveals and corners, and those junctions are far cheaper to resolve on paper than on site.
Check what is customised and what is standard
The 3D panel range supports custom size, colour and pattern. That flexibility matters on commercial work, where a designer often wants a relief scaled to a wall height or matched to a joinery detail. The question is not whether customisation exists but how far it reaches in your proposal: does the quoted item cover your dimension and colour, or only the nearest standard module with a change order to follow?
Ask for the same clarity across the wider wall panels and wall cladding scope. When timber-look panelling, stone-effect surfaces and moulded panels are being considered together, a supplier who quotes them as one coordinated package will keep finishes, joints and delivery dates aligned in a way that separate purchases rarely do.
Your dimensions and colour written into the line item, not assumed A mock-up or first-article panel approved before batch production Offcut and wastage allowance stated, with the reasoning behind it Which items are stocked modules and which are made to order
Judge installation as part of the price
Lightweight panels that cut on site are an advantage in a live commercial fit-out, where other trades are working alongside you and access windows are short. But a low material price can disappear if nobody has planned the sequence: setting out, cutting allowance, protection of adjacent finishes, and the time needed to keep joints consistent along a long wall.
Confirm how the supplier's installation and after-sales support is arranged for your site — who attends, what they inspect at handover, and how snags are raised. If the same team is also handling joinery, flooring or lighting in the building, ask how the wall panel installation is coordinated with those packages rather than left to whoever finishes last.
Fixing detail and background preparation shown on the drawings Installation sequence agreed against other site trades Snag list process and handover inspection defined in writing Spare panels held for future maintenance of the same pattern
Score the proposal before you compare prices
A useful commercial comparison is a simple pass or fail on four points: does the proposal reference your drawings; does it state dimensions, finish and fixing method as numbers rather than adjectives; does it treat customisation as included or as an extra; and does it plan installation and handover. A higher-priced quotation that answers all four usually costs less than a cheaper one that answers none.
If your project needs wall finishes, joinery and loose furniture coordinated from one source, turnkey interior project solutions cover design consultation, material selection, manufacturing, project management and installation as a single scope — which is where a wall panel decision stops being an isolated purchase and becomes part of the programme.
Send your elevations and the rooms you intend to panel, and the specification can be confirmed against them directly: santerson@qq.com, phone or WhatsApp +86-13928214007 (PHILLIP).