A two tone sliding door wardrobe looks simple on a drawing: two colours, two or three panels, a rail. On site it is a built-in joinery item that has to clear the ceiling height, sit plumb against a finished wall, run smoothly on its track and match the colour and sheen of the cabinetry beside it. That is why the question is rarely "can you make this wardrobe" and almost always "can you deliver this wardrobe, in this room, at this height, with this finish, without a snag list." The checks below are worth putting to any supplier before a purchase order is raised.

1. Confirm the product family before the finish

Sliding door wardrobes are a specific category, not a style. Our Two Tone Sliding Door Wardrobes sit inside the wider Sliding Door Wardrobes collection alongside Matte Sliding Door Wardrobes, High Gloss Sliding Door Wardrobes and Mirror Sliding Door Wardrobes. Ask which family the supplier is actually quoting from, because that determines the track system, the panel construction and how a two colour elevation is split. A supplier who answers with hinged or walk-in wardrobe details has quoted a different product.

For a two tone elevation, ask three things in writing: which panels carry which colour, where the split falls relative to the door edges, and how the same two shades are reproduced on adjacent cabinetry. Finish names travel badly between factories, so shade references and sample panels matter more than adjectives.

2. Test whether sizing is genuinely made to measure

Our product pages state made-to-measure sizing, material and finish options, and a layout tailored to the project, with dimensions and selected specifications confirmed for each project. Push on that wording. A supplier supporting real built-in work will ask for room heights at several points, floor levelness, wall alignment, skirting and cornice details, and where services run behind the wall. They will tell you what they need from your site survey rather than sending back a standard width and height table.

Two practical tests: send an elevation with an unusual dimension, such as a wardrobe running into a soffit or a room whose height varies along the run, and see whether the response is a drawing query or a catalogue substitution. Then ask how the carcass is levelled and scribed to an out-of-square wall on site. Suppliers who build for villas and apartments have answers; suppliers working only from standard modules usually do not.

3. Ask what happens between design sign-off and the container

Wardrobe failures are coordination failures. Look for a supplier whose process is documented end to end: project brief and design proposal, quotation and detail confirmation, then production, shipment and follow-up. One-stop furniture and building materials supply matters here because wardrobes rarely stand alone; they meet engineered flooring, wall panelling, doors and kitchen cabinetry, and all of those have to come from the same set of dimensions.

Ask who signs off the shop drawings, at what stage samples are approved, and how a late change is handled once panels are cut. A supplier offering custom furniture design and prototyping can show you prototype or mock-up evidence; one who cannot will approve drawings quickly and absorb the risk on site, which is where it becomes your cost.

4. Check delivery and installation against the room, not the port

Ask what logistics and door-to-door delivery covers in your city: packaging for tall panels, container loading sequence, who clears customs, and whether the last leg is kerbside or into the apartment. Sliding wardrobe panels are long and unforgiving of stairwells and lifts, so panel sizing decisions should be made with the access route in mind.

Then ask about installation and after-sales support: who fits the tracks, how doors are adjusted after the building has settled, what is inspected at handover, and how replacement panels or track parts are supplied years later. A supplier working on villa and apartment projects in places such as Willoughby, Perth, North Turramurra, Melbourne and Sydney can talk through site conditions concretely; vague promises of "professional installation" should be replaced with named responsibilities.

5. Read the specification sheet for what is missing

A credible quotation for a sliding wardrobe lists panel thickness, track and runner type, soft-close provision, carcass material and edge treatment, internal layout, and the finish build-up for each colour. It also states what still needs confirming. Where a supplier presents fixed numbers you cannot verify (a precise factory area, an export percentage, a certification), treat them as claims to confirm before they enter your project documentation.

A short assessment checklist

• Quotes from the sliding door wardrobe family, with the two colour split drawn on an elevation.
• Questions about your survey: room heights at several points, floor levelness, wall alignment, and the access route for long panels.
• Samples of both finishes approved before any panel is cut.
• Shop drawings signed off at a defined stage, with a written process for late changes.
• Delivery scope stated to the room itself, plus track adjustment and spare-part support after handover.

If one supplier can satisfy all five points in writing, they are supporting your requirements rather than quoting a product. That is the difference you will feel at handover.

To check a wardrobe elevation, finish sample or site dimension against our Sliding Door Wardrobes collection, send the drawings to SANTERSON. Contact PHILLIP, Phone/WhatsApp +86-13928214007, Email santerson@qq.com, or use our contact page.