1. Confirm the exact finish, not just the word "gold"

"Gold" covers a wide family of stainless steel surface treatments. Our Custom Gold Stainless Steel Laser Cut Decorative Screen Partition is made with a gold mirror finish, which reads very differently from a brushed gold or an antique bronze. A mirror surface throws sharp reflections and picks up fingerprints in a busy lobby; a brushed surface diffuses light and is more forgiving under hand contact. Where a warmer, darker tone suits the scheme, we also fabricate a Custom Bronze Stainless Steel Laser Cut Decorative Screen Partition in an antique bronze finish.

Practical step: ask for a physical finish board of the exact treatment proposed, and view it in the actual lighting condition of the room before you approve the finish in writing. Under warm low-Kelvin lobby fittings and under daylight-loading atrium glass, the same gold can read amber on one and pale yellow on the other.

2. Lock the pattern file and its scale

Laser cutting is driven by a vector drawing, so approval should be given on a scaled file, not on a mood image. Confirm three points: whether the motif repeats across the panel or runs as one continuous composition; where the repeat cut lines will fall once the design is split into panels; and how open the pattern is in percentage terms, because openness drives both light transmission and stiffness.

Send us your drawing, photograph or reference image and we produce a cutting layout to match. What you should receive back before sign-off is a dimensioned shop drawing showing the pattern at full size for at least one bay, with the joint positions marked.

3. Agree the panel breakdown and total opening size

Screens are fabricated as panels, then assembled. Panel count, panel width and overall height are all customizable on our wall panel systems and metal screen ranges, but the breakdown is not a free choice — it is constrained by sheet size, transport limits, lifting access and where the frame can be fixed. For wide feature walls we build multi-panel configurations, as with our bronze screen; for a Custom Laser Cut Metal Screen used as a decorative partition at a hotel reception, the split usually follows the floor line and the ceiling grid.

Confirm on the drawing: panel widths, joint widths, whether joints sit on a mullion or are butted, top and bottom trim details, and how the screen terminates against wall, floor and ceiling finishes.

4. Specify material, thickness and frame separately

The face sheet, the perimeter frame and any intermediate stiffening are three different items, and each needs its own line on the order. Our product pages present material, finish, thickness and size as configurable to your design; we ask that exact grades, plate thicknesses and structural members be confirmed in writing for each project rather than assumed from a catalogue page.

5. Check the structural and safety position for a free-standing screen

A partition that spans an open floor is a different problem from a screen fixed flat to a wall. Free-standing panels need top and bottom restraint or a designed frame, and tall narrow panels are sensitive to impact and to being leaned on. Where the screen sits in a guest route, a lobby queue line or near a stair, confirm with your structural engineer how it must be restrained before you fix the design. Our partition sliding systems are a separate route where the brief calls for a screen that moves; track, floor guide and panel weight all change in that case.

Where fire strategy or means-of-escape drawings govern the location, get the relevant consultant's position recorded before ordering. Product marketing copy is not evidence of classification, and we do not publish performance certificates as a substitute for your own project approval.

6. Decide how light will behave behind the screen

The value of a laser cut screen is usually the shadow it casts. That effect has to be designed, not discovered after installation. Confirm the light source type and position, whether lighting sits in front, behind or inside a reveal, and whether any fitting is integrated into the screen frame itself — for that we work alongside our integrated cabinet lighting and wall sconce ranges. A backlit screen with a dense pattern reads as a graphic; the same panel with grazing light from one side reads as texture.

Ask for a shadow study at the approved pattern scale, and check both daytime and evening conditions. If the client's decision rests on a rendering, request that the rendering use the actual cut pattern at the real spacing.

7. Set the inspection point before production runs

For a made-to-size decorative item, the cheapest control is one inspection while the work is still adjustable. A reasonable sequence: finish board approved; shop drawing signed; first article or sample panel checked for cut quality, pattern alignment and finish colour; then the full set released. Where several screens appear across a project — reception, lift lobby, ballroom ante-room — inspect them against one approved reference so the finishes match room to room.

8. Plan packaging, sequence and site handling

A mirror-finish panel that arrives scratched cannot be corrected on site. Confirm crating method, edge protection, panel identification marks tied to the shop drawing, and the delivery sequence against other trades in the same area. Our logistics and door-to-door delivery service covers freight arrangements, packaging and container loading, customs documentation and shipment tracking; import terms, duties and transit arrangements are confirmed per project rather than quoted as a blanket commitment. Installation and after-sales support then covers on-site fitting, inspection of the installed work and snag closure.

Also confirm storage: decorative screens need a dry, secure holding area close to the final location, and site access must physically accept the longest panel. A panel that cannot be turned a corner is a fabrication change, not a site fix.

How this fits a wider package

Screens rarely sit alone. In villa and hospitality work they are usually part of a larger joinery and finishes package alongside custom niche paneling, decorative wall panels, ceilings and cladding. Ordering them through one custom furniture and interior products manufacturer keeps finishes, tolerances and delivery dates under a single production plan — which is where most of the coordination saving actually comes from.

If you have a drawing or reference image ready, send it with the room dimensions and the lighting notes, and we will return a cutting layout and quotation against your scheme.