Project buyers usually start looking at a swim spa when the standard catalogue model no longer fits the site. That is exactly the moment Outdoor Swim Spa WS-130BⅤ-U becomes worth evaluating: it is one of the configurable long-shell units in our outdoor swim and hydrotherapy range, and it is specified for projects where the layout, the equipment list or the local power supply cannot be taken for granted.

The trigger: when a standard model stops matching the site

In villa, resort and private-club work, the decision to move from a catalogue unit to a custom outdoor swim spa usually comes from one of four findings during design development:

  • The footprint is awkward. A narrow side yard, a terrace with an existing column grid, or a podium deck with a fixed waterproofing line leaves no clean rectangle for an off-the-shelf shell.
  • Two programmes share one vessel. Lap swimming at one end and seated hydrotherapy at the other, in a single length, so the client gets exercise and recovery without two separate installations.
  • The equipment list is not fixed. Jets, lighting, ozone or sanitisation, heat pump and insulation are still being traded against budget, and the buyer needs a supplier who can re-quote the package rather than sell a sealed box.
  • Electrical capacity on site is unknown. Supply authority limits, generator backup or an existing distribution board constrain what can be connected, so total connected load becomes a tender item instead of an assumption.

What the WS-130BⅤ-U specification actually gives you

The catalogue entry for this model lists a shell of 9950 × 3000 × 1430 mm, which is the kind of length that lets one end serve as a swim channel and the other as a jetted seating area. The captured specification sheet shows 23 jets across the vessel, five LED lights, four water pumps and one filter pump, one control system, and a total power figure of 11.85 kW.

Read those numbers the way a procurement team should: as a starting configuration, not a promise. The same catalogue family also lists the closely related WS-130BⅤ with a different pump and jet count and a swim training system added, which shows how quickly equipment changes between variants of one shell. We therefore confirm included equipment and electrical requirements for the selected configuration before any order is placed, and we ask project buyers to do the same on their side.

Where customisation genuinely helps a project

For this range, optional items listed in the catalogue include control systems, UV sterilisation, additional water pumps, heat pumps, sand filtration, insulation and steps. Each of those maps to a real decision on site:

  • Heat pump and insulation matter when the vessel is used outside a warm season, or where the client intends year-round use and wants running costs controlled.
  • Sand filtration and UV sterilisation matter where municipal top-up water is unreliable or where a facility operator wants a simpler maintenance routine.
  • Steps and access detailing matter when finished deck levels are still being set, because the height difference between structural slab and finished level decides whether standard steps work.
  • Control system specification matters when the spa has to sit inside a building management system or be operated by non-technical staff.

If the required shape itself is the problem rather than the equipment, we also produce customisable outdoor spas in square, round, oval and curved forms, built on an acrylic shell with structural reinforcement, for gardens, terraces and leisure areas where a rectangular vessel simply will not sit.

How the swim spa fits a wider procurement package

A swim spa is rarely the only wet-area item on a villa or hospitality package. Basins, showers, wall and floor finishes, lighting and outdoor furniture around the vessel all have to agree on level, material and colour, and they are usually bought from different suppliers with different lead times. That coordination is where project buyers lose the most time.

We work as a single source for furniture and building materials, so the water feature, the poolside furnishing and the adjacent interior finishes can be specified, produced and shipped together under turnkey project delivery. Freight, customs paperwork and door-to-door delivery are arranged by our logistics team, with installation support and after-sales service following on site.

A short checklist before you commit

  • Send the survey or setting-out drawing early. The 9950 mm shell length in the catalogue needs to be checked against real site dimensions, not a plan-scale guess.
  • Confirm available supply capacity and the agreed connected load in writing before equipment options are finalised.
  • Decide which functions are mandatory at handover: swim training, jet count, lighting, sanitisation method, heating.
  • Fix deck finish levels and access details before ordering steps and seating edges.
  • Group the spa with other wet-area and outdoor products in one order to consolidate production and shipping.

Talk to us about your site

If your project needs a long swim-and-recovery vessel, or if the standard shape does not fit the plot, send us the layout, the intended use and the electrical constraint you are working with. We will come back with a configuration for Outdoor Swim Spa WS-130BⅤ-U or an alternative from the range, with equipment and requirements confirmed for that specific build.

SANTERSON — furniture and building materials manufacturer, one-stop project supplier. Phone / WhatsApp: +86-13928214007 (PHILLIP) · Email: santerson@qq.com