Corner tall cabinets look simple on a drawing until the order goes in. The unit sits across two walls, has to clear doors and services, and its finish has to match cabinetry made somewhere else. On a villa or apartment fit-out, one mis-measured pantry or linen tower can hold up tiling, flooring and joinery at the same time. This guide sets out how we plan quantities and coordinate Santerson Corner Tall Cabinets with the rest of the built-in package, so the schedule stays intact.

Why corner tall units are ordered differently

A straight tall cabinet can be dropped into a run once the wall is finished. A corner unit cannot. Its return leg depends on what sits on the adjacent wall, and its depth is set by the reveal that keeps doors swinging free of handles, appliance handles and switch plates. Two details cause most rework:

• The corner return is measured before floor and wall finishes are accounted for, so the carcass arrives a few millimetres short or proud.
• Door swing is checked on plan only. Once handles, skirting and bench edges are added, the door fouls and the unit has to be re-hung on site.

Our corner tall cabinets are made-to-measure rather than supplied in fixed sizes, so the dimensions, layout and finish are set from your drawings and confirmed with you before production. That is the practical reason we ask for coordinated information early instead of a room-by-room shopping list.

Step 1 — Count the units by role, not by room

Start with function. In residential and hospitality fit-outs we normally see corner tall positions doing one of four jobs, and each needs a different internal layout:

• Store and pantry columns — deep shelving, often with a pull-out arrangement so the rear of the corner stays reachable.
• Linen and housekeeping towers — adjustable shelves, sized around bedding depths rather than plates.
• Appliance housing — requires the appliance model fixed before the carcass is cut, with ventilation and service access agreed.
• Display and glass-front columns — glazing type, shelving spans and lighting are set at the same time as the carcass.

Once each position has a role, quantity follows from the count of positions — not from the number of rooms. A guest suite with its own linen tower and a shared pantry column is two tall units, even though it reads as one space on plan.

Step 2 — Build the quantity sheet around what you can actually confirm

For each position, record only what is fixed at that stage. Anything still open should be listed as an item to confirm, so it does not silently disappear into production:

Order in three groups rather than one big release: positions whose walls are finished, positions waiting on tiling or services, and positions still under design review. This keeps the first group in production while the others are settled, which is how we hold a delivery sequence steady on multi-unit projects.

Step 3 — Coordinate the corner with adjacent trades

A corner tall cabinet is a junction, so it should be reviewed together with the work that meets it:

• Flooring and skirting — decide whether the carcass sits on the finished floor or over it, and keep that decision consistent across the whole package.
• Electrical — lighting inside glass-front and display columns needs a feed placed to the drawing, not chased later.
• Tiling — tiled returns change the finished dimension, so confirm the tile set-out before measuring.
• Appliances — model, door direction and ventilation requirement must be fixed before the carcass is cut.

Where the tall unit is part of a wider fit-out, one finish schedule covering cabinetry, wall and ceiling finishes and ironmongery removes most clashes. Under turnkey villa furnishing we handle that coordination across production, logistics and site installation, which is easier than reconciling three separate suppliers' drawings at handover.

Step 4 — Specify finishes once, across the whole package

Corner units are visible from two directions, so a finish that reads well on a sample can look different across a tall door. Specify the material and finish by name for every position in the same document, including end panels that face into a hallway. Where cabinetry, wardrobes and tall columns come from one production line, batch numbers and veneer matching stay consistent; split them between suppliers and colour drift is the usual result.

Our custom and OEM service covers bespoke finishes, textures and branding, so a project can carry one material palette through kitchen, laundry and bedroom joinery. Send the finish schedule with the drawings and we confirm what is available for your order before quoting.

Step 5 — Sequence delivery against the site programme

Tall cabinets are heavy, boxed awkwardly and cannot be stored in a small apartment. Agree container grouping around the installation order: rooms that will be ready first ship first. We arrange sea, air and rail freight with customs paperwork and door-to-door delivery, and confirm the delivery address, access and lifting arrangements for each site at booking.

Before installation, walk the corner positions with your site team: check that floor levels are set, services are where the drawing says, and doors clear adjacent handles. Installation, snag inspection and handover follow as part of the same package.

What to send us for a corner tall cabinet quotation

• Plans and elevations for each corner position, with finished floor and finished wall levels marked.
• The intended role of the unit — store, linen, appliance housing or display.
• Appliance models and door direction where an appliance is built in.
• The finish schedule name for the adjoining cabinetry or wardrobe run.
• Site address, access notes and the intended installation order.

Send those items and we come back with a configuration proposal and quotation for review before anything enters production. Australian project teams can see comparable villa work in our Australian villa furniture projects.

Dimensions, materials, glass, load ratings and installation details are confirmed for each selected configuration on your project. Contact PHILLIP to discuss a corner tall cabinet package for your fit-out.