A glass folding door is one of the more demanding items in a residential project: it spans a wide opening, carries heavy glass panels on hardware, and is measured into an existing structure. When you send a request for quote for Santerson Glass Folding Doors, the quality of the price you get back depends almost entirely on how complete your information is. Vague enquiries produce vague numbers, and the discrepancy usually surfaces later as change orders, not savings. The checklist below covers what a manufacturer needs to quote accurately the first time.

1. Opening Dimensions and How They Were Taken

Santerson Glass Folding Doors are made to measure, so the opening is the starting point of the quote. Provide the clear width and height at a minimum, and note whether the opening is a new build framed to your drawings or an existing opening being replaced. Existing openings in particular vary: floors, lintels and side walls are rarely perfectly square, so widths and heights measured at several points tell the manufacturer far more than one number.

If you have architectural drawings or a marked-up opening sketch, include them. A dimensioned elevation of the opening, with floor finish levels noted, lets the manufacturer propose a panel layout rather than guess one.

2. Panel Count, Fold Direction and Traffic Line

State how you want the door to work. How many panels do you expect across the opening? Do the panels fold to one side or split from the centre? Which direction should they stack, and is there furniture, a column or a wall return that limits where the stack can land? A folding door that packs onto a traffic line is a daily annoyance, and the manufacturer can only avoid it if they know how the room is used.

Also say whether the door will be opened every day as a living-space connection or mostly held closed with occasional opening. Daily-use doors justify a smoother rolling hardware specification and a more robust finish; decorative partitions can be specified more lightly.

3. Glass and Frame Choices

Glass folding doors are specified through choices, not a single standard item. In your request, name or describe what you want for each layer so the quote reflects the real build:

• Glass type and colour: clear, tinted or frosted, and whether privacy or softening of light matters in the room.
• Pane construction: whether you want a single glazed or double glazed build, and what you want the door to do for the room — acoustic separation, thermal comfort, or purely visual separation.
• Frame material and finish: colour, texture and metallic tone, matched to other joinery in the project.
• Handle and hardware style: whether a particular handle finish is already specified elsewhere in the build.

If you are undecided, say so and ask for the options that fit your opening and budget. A good request for quote invites a recommendation; it does not pretend every decision is already made.

4. Project Context and Related Items

One door is priced differently than part of a package. Tell the manufacturer whether this is a single replacement in one home or a multi-unit job, and whether other joinery is involved. Santerson produces a broader folding and door range, including Classic Folding Doors and Santerson Wood Veneer Folding Doors, alongside wardrobes, kitchens and interior fixtures. When the enquiry shows the wider scope, the supplier can align finishes across openings and handle the joinery as one production run instead of isolated items.

5. Delivery, Site Conditions and Installation

Glass and hardware travel and need handling on site, so the commercial answer depends on logistics as much as the product. Your request should include the delivery city and building type, floor level, and any access limits such as lift size, stairwells or crane requirements. If the destination is an Australian project, name the state and the nearest port of entry; for international orders, say who is handling freight and customs so the quote states a delivery term rather than an assumed one.

Installation should not be an afterthought. Specify who will fit the door and whether you need manufacturer guidance, so the quote matches the level of preparation needed — fixing details, pack sizes and sequencing all change with the install method.

6. Timeline and Decision Points

Made-to-measure joinery moves through design confirmation, production and shipping, and the schedule depends on your dates, not the supplier's defaults. Give a target installation month and state your own decision deadlines: when drawings must be signed off, when finishes must be locked, and when the opening must be watertight or secured. If a showroom or sample is needed before ordering, ask for it in the first enquiry rather than the last, because waiting on a sample is one of the most common causes of a slipped joinery programme.

7. What a Complete Enquiry Looks Like

Before sending, check that your message answers these questions. If most of them are covered, the response should be a usable, comparable number rather than a round figure with caveats.

• Opening width and height, with the source of the dimensions and whether the opening is new or existing
• Panel count, fold direction and stack position, with any obstructions noted
• Glass type, glazing construction and frame finish, or a request for recommendations
• Quantity: single item or multiple units across the project
• Related joinery that should share the same finish
• Delivery address, building access conditions and delivery term
• Who installs, and what support you expect from the supplier
• Target installation date and your sign-off deadlines
• A named contact with phone or email for follow-up questions

For buyers coordinating several openings and finishes on one project, a single enquiry that covers the whole joinery package — glass folding doors, Classic Folding Doors and matching built-in furniture — makes pricing easier to compare and finishes easier to control. Santerson is a China-based furniture and building materials manufacturer offering custom sizing and finish selection, and enquiries go through the contact page at santerson.com/contact. Confirm the final dimensions, specification and delivery term in writing before production begins.